BSOD playing League of Legends, error 0x0000008E.


  1. Posts : 9
    Windows 7 Ultimate 32-bit (6.1, Build 7301)
       #1

    BSOD playing League of Legends, error 0x0000008E.


    Hello,
    This is my first post so go easy on me...
    So here's the deal: I keep getting BSOD's when I'm playing LoL. Same STOP code each time ==> 0x0000008E.
    I'm not very good at PC's so correct me if I state something wrong.
    Here is some info that is needed for a clear view(i guess...):
    first of all the crash report thingy i get after rebooting after the BSOD:

    Problem signature:
    Problem Event Name: BlueScreen
    OS Version: 6.1.7601.2.1.0.256.1
    Locale ID: 2067

    Additional information about the problem:
    BCCode: 1000008e
    BCP1: C0000005
    BCP2: 82E03800
    BCP3: 9FE63690
    BCP4: 00000000
    OS Version: 6_1_7601
    Service Pack: 1_0
    Product: 256_1

    Files that help describe the problem:
    C:\Windows\Minidump\060412-25958-01.dmp
    C:\Users\Leon\AppData\Local\Temp\WER-42042-0.sysdata.xml
    Second is my PC config:
    OS: Windows 7 Ultimate 32-bits (6.1, Build 7601)
    SP: SP1
    BIOS: Award Modular BIOS v6.00PG
    Processor: AMD Athlon 64 X2 Dual Core Processor 6000+ 3.00GHz
    RAM: 2GB
    Video Card: GeForce 8800 GT

    If you need any additional information, please post it and I will reply asap.
      My Computer


  2. Posts : 11,269
    Windows 7 Home Premium 64 Bit
       #2

    The information provided would lead to an inconclusive analysis. Please follow the https://www.sevenforums.com/crashes-d...tructions.html so we can provide you with clear troubleshooting steps.
      My Computer


  3. Posts : 9
    Windows 7 Ultimate 32-bit (6.1, Build 7301)
    Thread Starter
       #3

    Ok my BSOD information is in the attachments.
    OS: Windows 7 Ultimate x86(32-bit)
    original OS: Windows XP
    OEM or Full retail: This is actually a second hand pc i got from my cousin, he formatted the pc and reinstalled windows(with the official cd i guess)

    Age of the system: about 3 years i guess
    Age of the Os: 3 weeks
      My Computer


  4. Posts : 9
    Windows 7 Ultimate 32-bit (6.1, Build 7301)
    Thread Starter
       #4

    Ok so I'm guessing I found the problem...(take a look at the attachment)
    If this is the problem, will placing some extra fans help? Or do i need to replace parts?
      My Computer


  5. Posts : 11,269
    Windows 7 Home Premium 64 Bit
       #5

    First thing you should do is check for dust. Due to the age of the system, that would be my first guess. The second would be the thermal compound has degraded or is not applied properly.

    To remove dust, follow the subsequent general procedure. If you have a desktop bought from Dell, HP, Sony, Lenovo, etc. make sure removing the desktop casing will not void your warranty first. Call the company if you are still under warranty and ask if it is okay to remove the casing and blow dust out. The procedure described is fine for laptops; just make sure no stickers are on panels saying if you remove the panel it will void the warranty.
    1. Shut down and turn off your computer.
    2. Unplug all power supplies to the computer (AC Power then battery for laptops, AC power for desktops)
    3. Hold down the power button for 30 seconds to close the circuit and ensure all power drains from components.
    4. Remove the casing for a desktop, or remove any screwed on panels and disc drives for laptops.
    5. Blow out the dust inside by using a can of compressed air or a low pressure compressor. You will want to put the computer on a desk or table so you can maintain the can in an upright position if using a can of air. Blow into all crevices on the motherboard, heat sinks, cards, modules, etc. for a desktop. Blow into vents, opened panels, disc drive areas, USB ports, and the keyboard if it is a laptop. You may also want to blow inside the disc drive by replacing the drive to the laptop, starting the computer, opening the drive, and then turning off the computer and removing all power as described above including the 30 second power button step. For a desktop, you may also want to blow inside the disc drive by starting the computer, opening the drive, and then turning off the computer and removing all power as described above including the 30 second power button step.
    6. Replace casing for the desktop. Replace panels and disc drive (if you have not already done so) for the laptop.
    7. Plug power supplies in. AC adapter for the desktop. Battery and then AC Adapter for the laptop.
    8. Start the computer and see if performance is better.



    Thermal Paste and How To Use It | techPowerUp
      My Computer


 

  Related Discussions
Our Sites
Site Links
About Us
Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd
All times are GMT -5. The time now is 22:49.
Find Us