Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: BSOD 0x50 when idling

05 Jun 2012   #1
Indrek

Windows 7 Ultimate 64-bit
 
 
BSOD 0x50 when idling

I just had a BSOD on my computer and I'm trying to troubleshoot it.

BlueScreenView reports the following:
Bug check: 0x00000050 (PAGE_FAULT_IN_NONPAGED_AREA)
Caused by: ntoskrnl.exe+7f1c0

The only thing the computer was doing at the time was downloading a few games from Steam and the Windows 8 Release Preview ISO.

The .zip file is attached, as requested. Windows 7 is 64-bit, retail version. Full specs are in my profile. The computer was built ~3 months ago, and Windows was also installed at that time.


My System SpecsSystem Spec
.
05 Jun 2012   #2
writhziden

Windows 7 Home Premium 64 Bit
 
 

Crashes are pointing to memory problems or driver conflicts.
  • If you are overclocking any hardware, please stop.

  • Run the boot version of Memtest86+ paying close attention to Parts 2 and 3 of the tutorial. Also, in case Memtest86+ misses anything and comes up with no errors, run the extended version of the Windows Memory Diagnostics Tool for at least five passes. These you may want to run overnight since they take a long time to complete (run them an hour before bed each of the next two nights and check before going to sleep that they are still running).
    warning   Warning
    Before you proceed with the following, answer these two questions: Are you still under warranty? Does your warranty allow you to open up the machine to check hardware? If you are unsure of the answers to these questions, contact your system manufacturer. WARNING: The steps that follow can void your warranty!!!

    For Part 3: If You Have Errors: If you swap any memory components, follow these steps for ESD safety:
    1. Shut down and turn off your computer.
    2. Unplug all power supplies to the computer (AC Power then battery for laptops, AC power for desktops)
    3. Hold down the power button for 30 seconds to close the circuit and ensure all power drains from components.
    4. Make sure you are grounded by using proper grounding techniques, i.e. work on an anti-static workbench, anti-static desk, or an anti-static pad. Hold something metallic while touching it to the anti-static surface, or use an anti-static wristband to attach to the anti-static material while working. If you do not have an anti-static workbench, desk, or pad, you can use your computer tower/case by finding a metal hold in it, such as a drive bay.
    Once these steps have been followed, it is safe to remove and replace components within your computer.

  • An underlying driver may be incompatible\conflicting with your system. Run Driver Verifier to find any issues. To run Driver Verifier, do the following:
    a. Backup your system and user files
    b. Create a system restore point
    c. If you do not have a Windows 7 DVD, Create a system repair disc
    d. In Windows 7:
    • Click the Start Menu
    • Type verifier in Search programs and files (do not hit enter)
    • Right click verifier and click Run as administrator
    • Put a tick in Create custom settings (for code developers) and click next
    • Put a tick in Select individual settings from a full list and click next
    • Set up the individual settings as in the image and click next
      Attachment 215306
    • Put a tick in Select driver names from a list
    • Put a tick next to all non-Microsoft drivers.
    • Click Finish.
    • Restart your computer.

    If Windows cannot start in normal mode with driver verifier running, start in safe mode. If it cannot start in safe mode or normal mode, restore the system restore point using System Restore OPTION TWO.

    If you are unable to start Windows with all drivers being verified or if the blue screen crashes fail to create .dmp files, run them in groups of 5 or 10 until you find a group that causes blue screen crashes and stores the blue screen .dmp files.
    The idea with Verifier is to cause the system to crash, so do the things you normally do that cause crashes. After you have a few crashes, upload the crash reports for us to take a look and try to find patterns.

    When you are ready to disable Verifier: Start Menu -> All Programs -> Accessories -> Right click Command Prompt -> Run as administrator -> Type the following command and then Enter:
    verifier /reset
    -> Restart your computer.
My System SpecsSystem Spec
Reply

 BSOD 0x50 when idling




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
BSOD while I am idling
Hi I had previous BSOD problem before with this computer that was related to my ethernet's driver, and the solution given last time seemed to fix it. However, I am getting another BSOD which I believe is completely unrelated to the previous BSODs. If there was some sort of pattern of why...
BSOD Help and Support
BSOD when idling
Hey guys, Recently, my laptop has started getting BSOD errors especially when the laptop is idle (e.g. when I leave it on to convert videos or download sth). When I view the errors using Bluescreenview, it comes up as DRIVER POWER STATE FAILURE ntoskrnl.exe+7f1c0 I have attached the .zip...
BSOD Help and Support
0x50 bsod
hello i bought a toshiba laptop about a week ago. iv had two sporadic bsods while using it over 7 days. any help would be appreciated. iv ran the basic windows memory diagnostic which showed no problems. PAGE FAULT IN NON-PAGED AREA 0x00000050 (0xfffffa8013033098, 0x00000000000000000,...
BSOD Help and Support
BSOD 9f while idling
The dreaded BSOD 9F driver power state failure has been a problem for the last few months. HP dv7 laptop is about 1 1/2 yrs old. BSOD is random; sometimes a week can go by and at others multiple times in a day. I updated the BIOS to F.1B, the radeon graphics hd6770m driver is 8.830.6.2000 4/12/2011...
BSOD Help and Support
0x50 BSOD help
well, i got given a laptop to look at from a friend. i have been trying to fix the bugger, but am coming up blank. it is a Dell Inspiron (Model #PP41L) running Vista (i am not even sure if it is 32-bit or 64-bit, or what SP if any is on it). anyhoo, it BSOD on startup, before the logon...
BSOD Help and Support
BSOD - While idling and using
Hello all, I come here after some help to solve the problem of my recurring BSODs, I have had 18 of them (well 18 minidumps are logged) since the 29th of August. At first I came to think it was due to my PSU not giving off enough power when I leave my computer on overnight - even though it ran...
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 21:11.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App