Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: BCCode 50, random blue screens on new system.

07 Jun 2012   #1
alex2992

Win 7 ultimate x64
 
 
BCCode 50, random blue screens on new system.

I keep getting random BSODs even though I'm not stressing the system. It seems to happen only in Windows i.e. not in a game. It's been happening more often over the past 2 days. It's a new system, recently aquired about a week ago.
I've attached the performance monitor report along with the windows nt6 folder zipped up together and the latest minidump file from the last BSOD.
Windows 7 Ultimate x64 full retail, installed 3-4 days ago. New hardware except for the GPU and HDD.

Intel Core i5 2380P @ 3.10 ghz
8gb ram
nvidia geforce gts 250
GA-H61N-D2V gigabyte motherboard


My System SpecsSystem Spec
.
07 Jun 2012   #2
alex2992

Win 7 ultimate x64
 
 

ok, now it happened while playing Diablo 3 as well. guess it's random.
also, i've done a memory diagnostic and no problems were found.
My System SpecsSystem Spec
08 Jun 2012   #3
writhziden

Windows 7 Home Premium 64 Bit
 
 

Security Software: ??? Make sure to install security software. I recommend either of these:
After installing your security software, update it, and then run full scans today with each program. Report back the results of the scans.


Crashes are pointing to memory problems or driver conflicts.
  • If you are overclocking any hardware, please stop.

  • Run the boot version of Memtest86+ paying close attention to Parts 2 and 3 of the tutorial. Also, in case Memtest86+ misses anything and comes up with no errors, run the extended version of the Windows Memory Diagnostics Tool for at least five passes. These you may want to run overnight since they take a long time to complete (run them an hour before bed each of the next two nights and check before going to sleep that they are still running).
    warning   Warning
    Before you proceed with the following, answer these two questions: Are you still under warranty? Does your warranty allow you to open up the machine to check hardware? If you are unsure of the answers to these questions, contact your system manufacturer. WARNING: The steps that follow can void your warranty!!!

    For Part 3: If You Have Errors: If you swap any memory components, follow these steps for ESD safety:
    1. Shut down and turn off your computer.
    2. Unplug all power supplies to the computer (AC Power then battery for laptops, AC power for desktops)
    3. Hold down the power button for 30 seconds to close the circuit and ensure all power drains from components.
    4. Make sure you are grounded by using proper grounding techniques, i.e. work on an anti-static workbench, anti-static desk, or an anti-static pad. Hold something metallic while touching it to the anti-static surface, or use an anti-static wristband to attach to the anti-static material while working. If you do not have an anti-static workbench, desk, or pad, you can use your computer tower/case by finding a metal hold in it, such as a drive bay.
    Once these steps have been followed, it is safe to remove and replace components within your computer.

  • An underlying driver may be incompatible\conflicting with your system. Run Driver Verifier to find any issues. To run Driver Verifier, do the following:
    a. Backup your system and user files
    b. Create a system restore point
    c. If you do not have a Windows 7 DVD, Create a system repair disc
    d. In Windows 7:
    • Click the Start Menu
    • Type verifier in Search programs and files (do not hit enter)
    • Right click verifier and click Run as administrator
    • Put a tick in Create custom settings (for code developers) and click next
    • Put a tick in Select individual settings from a full list and click next
    • Set up the individual settings as in the image and click next
      Attachment 215681
    • Put a tick in Select driver names from a list
    • Put a tick next to all non-Microsoft drivers.
    • Click Finish.
    • Restart your computer.

    If Windows cannot start in normal mode with driver verifier running, start in safe mode. If it cannot start in safe mode or normal mode, restore the system restore point using System Restore OPTION TWO.

    If you are unable to start Windows with all drivers being verified or if the blue screen crashes fail to create .dmp files, run them in groups of 5 or 10 until you find a group that causes blue screen crashes and stores the blue screen .dmp files.
    The idea with Verifier is to cause the system to crash, so do the things you normally do that cause crashes. After you have a few crashes, upload the crash reports for us to take a look and try to find patterns.

    When you are ready to disable Verifier: Start Menu -> All Programs -> Accessories -> Right click Command Prompt -> Run as administrator -> Type the following command and then Enter:
    verifier /reset
    -> Restart your computer.


NOTE: Memtest86+ and Windows diagnostics are not the same thing.

Further reading:Finicky RAM
My System SpecsSystem Spec
.

Reply

 BCCode 50, random blue screens on new system.




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
seemingly random blue screens and random codes
Hi ive recently been have a lot of random bsod and have been randomly freezing and restarting my system specs are os-Windows 7 Home Premium 64bit cp-AMD Phenom(tm) II X4 970 Processor x4 motherboard-asus m4a87td evo 870 crossfire ddr3 am3 usb 3.o sata 3 amd memory-4gb (2gbx4) ddr3/1333MHz Dual...
BSOD Help and Support
Random "Blue Screens" BCCode: 124 -- Win7 x64
Hey guys. For the past month or so I've been dealing with random "Blue Screens." The reason why I quote Blue Screens is because that is the type of malfunction Windows says happened, but in actuality there is no blue screen. Sounds skip for a few seconds as the computer locks up and just reboots. ...
BSOD Help and Support
Random Blue Screens
Recently got new computer and it has been getting lot of blue screens. They show up very randomly as far as I can tell, sometimes when browsing web, sometimes when playing games. My Operating system is Windows 7 64-bit, and it is the orginal operating system on the computer. It came...
BSOD Help and Support
random blue screens with new pc
hey, i built a new pc but i keep getting random blue screens from time to time, even firefox crashes a lot sometimes.. and other times its fine and i go to the same sites everytime, seems to be a ram memory problem but i tested both sticks (i have 2x2gb) by removing one to see which one has...
BSOD Help and Support
Random Blue Screens
Ok, I just cannot get to the bottom of this, each day when I turn my pc on I seem to either get a blue screen or my pc reboots just before windows. I have done a full system test which seems to come back ok with PC Check. I think all my drivers are up to date. My pc is: MSI 785GTM-E45 Phenom...
BSOD Help and Support
Plz help random blue screens
Hi Can anyone help me i keep getting random blue screens here is my error code and my dump file. Problem signature: Problem Event Name: BlueScreen OS Version: 6.1.7600.2.0.0.256.1 Locale ID: 1033 Additional information about the problem:
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 20:05.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App