Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: What is wrong with this actually(Blue Screen)?

10 Jun 2012   #11
GradeAbra

Windows 7 Home Premium 64bit
 
 

I post a thread regarding drivers. Someone told me to use the Intel VGA driver. I wonder isit correct? I tried to install that few weeks ago but the same thing still happens.

So basically i only need to uninstall the "Intel G41 Express Chipset drivers under Display adapters". Restart and re-install the new drivers(Intel VGA driver)?

Display driver stopped responding and has recovered


My System SpecsSystem Spec
.
10 Jun 2012   #12
writhziden

Windows 7 Home Premium 64 Bit
 
 

Yes. It appears you are still having the same problem you were having in that thread. We would also still prefer if your system specs were in your profile and not in a post in another thread or in this thread. That way, if you start other threads later, you do not have to keep linking back to your old threads and have us try to find the post that contains the information. Many of us are helping in anywhere from tens to hundreds of threads, so having to get your info each time takes away from our ability to help others. By putting your specs in your profile information, you are being respectful to those helping and also to other users getting help on the forums.

eMachines Support - Downloads & Support Documents - Desktop / EL Series / EL1850

The Intel driver you want is the very bottom one.
Code:
VGA Driver	Intel	8.15.10.1968	51.0 MB	01/13/2012
My System SpecsSystem Spec
10 Jun 2012   #13
GradeAbra

Windows 7 Home Premium 64bit
 
 

Well, this morning what i did was uninstall the "Intel G41 Express Chipset drivers under Display adapters". Restart the pc and install this Intel VGA driver. All is well until now. Previously i did not uninstal the old one. Is there any difference if i don't uninstal it first?

Let hope this will solve the problem. I will monitor it for awhile and post back. And how do i upload my system spec to my profile?

Thanks.
My System SpecsSystem Spec
.

10 Jun 2012   #14
writhziden

Windows 7 Home Premium 64 Bit
 
 

You can upload the system specs in Internet Explorer if you use that browser. If you use a different browser, you will need to enter it by hand. The application makes it easier to get the information in a clear manner.

There is a difference if you do not uninstall the older drivers before installing the new drivers. If the old drivers were corrupted, remnants of the corrupted files can still exist with the new install, so installing over them does not remove the corrupted files. Uninstalling first removes the corrupted files so the updated drivers can be installed fresh with no old files remaining.

Let us know how the system is responding after you have more time to do your normal routine.
My System SpecsSystem Spec
11 Jun 2012   #15
GradeAbra

Windows 7 Home Premium 64bit
 
 

Hi,

Just awhile ago i encountered another sudden shut down/restart. What do you think is wrong this time? Should i try out another drivers?

After the PC restarted. 15mins after using, the screen black out and recovered. The "Display driver stopped responding and has recovered" message appeared.

I think something is wrong with my graphics card or harddisk.. I am wondering should i change them?
My System SpecsSystem Spec
11 Jun 2012   #16
writhziden

Windows 7 Home Premium 64 Bit
 
 

Is the system still under warranty?

If there is something wrong with the graphics card, that would indicate there is something wrong with the motherboard. It would be good to know if the system is under warranty.
My System SpecsSystem Spec
11 Jun 2012   #17
GradeAbra

Windows 7 Home Premium 64bit
 
 

No more warranty i bought this for more than 1 year. Warranty is 1 year i think.

I notice that after i uninstal the old driver and restart, the pc automatically detect and install the driver itself even before i install the newly downloaded ones. Wondering is this also a problem.

This is the new BSOD message i got..
My System SpecsSystem Spec
12 Jun 2012   #18
writhziden

Windows 7 Home Premium 64 Bit
 
 

Any new .dmps?

That BugCheck indicates hard disk problems. This could mean hard disk corruption, bad sectors, a failing hard disk, Windows files or registry corruption, viruses, or memory problems.
  • If you are overclocking any hardware, please stop.

  • Run Disk Check with both boxes checked for all HDDs and with Automatically fix file system errors checked for all SSDs. Post back your logs for the checks after finding them using Check Disk (chkdsk) - Read Event Viewer Log (you may need to search for wininit instead of chkdsk).
    For any drives that do not give the message:
    Windows has checked the file system and found no problems
    run disk check again as above. In other words, if it says:
    Windows has made corrections to the file system
    after running the disk check, run the disk check again.

  • Run the short and long tests with SeaTools for HDDs.
    SeaTools for Windows

    SeaTools for DOS
  • If you have an SSD, make sure the following are up to date:
    • SSD firmware
    • BIOS Version
    • Chipset Drivers
    • Hard disk controller drivers/SATA drivers
    • If you have a Marvell IDE ATA/ATAPI device, make sure the drivers are up to date from the Intel site or Marvell site and not from your motherboard/vendor support site.


  • Check Windows for corruption. Run SFC /SCANNOW Command - System File Checker up to three times to fix all errors with a restart in between each. Post back if it continues to show errors after a fourth run or if the first run comes back with no integrity violations. Use OPTION THREE of SFC /SCANNOW Command - System File Checker to provide us with the sfcdetails.txt file if errors occur.

  • Download and install Malwarebytes, update it, do not start the free trial, and then run a full scan. Also run a full scan with your antivirus software installed on your system. If you do not have antivirus software installed, see the Good and Free system security combination. for better security steps and scanning tools. Make sure to update the security software before running the full scan.

  • Run the boot version of Memtest86+ paying close attention to Parts 2 and 3 of the tutorial. Also, in case Memtest86+ misses anything and comes up with no errors, run the extended version of the Windows Memory Diagnostics Tool for at least five passes. These you may want to run overnight since they take a long time to complete (run them an hour before bed each of the next two nights and check before going to sleep that they are still running).
    warning   Warning
    Before you proceed with the following, answer these two questions: Are you still under warranty? Does your warranty allow you to open up the machine to check hardware? If you are unsure of the answers to these questions, contact your system manufacturer. WARNING: The steps that follow can void your warranty!!!

    For Part 3: If You Have Errors: If you swap any memory components, follow these steps for ESD safety:
    1. Shut down and turn off your computer.
    2. Unplug all power supplies to the computer (AC Power then battery for laptops, AC power for desktops)
    3. Hold down the power button for 30 seconds to close the circuit and ensure all power drains from components.
    4. Make sure you are grounded by using proper grounding techniques, i.e. work on an anti-static workbench, anti-static desk, or an anti-static pad. Hold something metallic while touching it to the anti-static surface, or use an anti-static wristband to attach to the anti-static material while working. If you do not have an anti-static workbench, desk, or pad, you can use your computer tower/case by finding a metal hold in it, such as a drive bay.
    Once these steps have been followed, it is safe to remove and replace components within your computer.
My System SpecsSystem Spec
12 Jun 2012   #19
GradeAbra

Windows 7 Home Premium 64bit
 
 

I have a question here. If i were to format drive and reinstall Windows(from recovery disks). Will it solve this problem for sure?
My System SpecsSystem Spec
12 Jun 2012   #20
writhziden

Windows 7 Home Premium 64 Bit
 
 

If it is software based, it probably will. Depends one whether you install the same software and drivers again, though. It could still be a software or driver conflict that is causing issues. We should first rule out hard disk corruption and errors first, though.
My System SpecsSystem Spec
Reply

 What is wrong with this actually(Blue Screen)?




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
taskbar moves to wrong screen on refresh
I've seen various conversations on the taskbar moving around, but none seem to fit my situation. I have 4 monitors in the following configuration: 3 4 1 2 My taskbar is on the left side of screen one. If an application causes a screen refresh (presumably a driver refresh of some sort) the...
General Discussion
Blue Screen Error but no actual blue screen pops up
While using my laptop, usually when trying to open some "windows" application such as task manager, wireless networks, documents, media player, windows updater etc. my laptop freezes or doesn't allow me to click on anything except the minus button on all my windows and the start button. I'll try to...
BSOD Help and Support
Blue Screen out of the Blue, Was working fine for 9+ hours then c...
Well i had my computer on all day since i woke up @ 8 in the morning gaming and what not. It had finally crashed on me while i was playing dirt 2 a couple of mins ago. I had fixed all my previouse blue screen problems by not using any AMD OverDrive Settings for my Radeon HD 4850. My specs...
BSOD Help and Support
Wrong boot screen issue (win7x64)
Hi there... I've been wondering why I get ad Us/Uk bootscree on my ITA copy of Ultimatex64 i recently installed on my mum's pc. I get this: http://t2.gstatic.com/images?q=tbn:ANd9GcT4teX6izPL6ac4vvTY_FUB_7uuS_eiciOrqxjran4hSTZp1hcv_g Instead of this:...
Installation & Setup
Wrong Boot Screen
Hi all I originally had Vista Ultimate x64 and Windows 7 x64 dual booting fine. I had a problem with Win7 - my fault- needing me to restore an Acronis backup. I still am able to dual boot but Win7 now uses the Vista boot up sequence up to the Welcome screen, i.e. it does not show the...
General Discussion


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 08:21.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App