Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: BSOD 0x00000024 related to USB eLiscenser driver?

15 Jun 2012   #11
RushPfeiffer

Windows 7 Home Premium x64
 
 

Quote   Quote: Originally Posted by writhziden View Post
Security Software: ??? Make sure to install security software. I recommend either of these:After installing your security software, update it, and then run full scans today with each program. Report back the results of the scans.


Recommend removing your ASUS utilities through Start Menu -> Control Panel -> Uninstall a program. They can provide software interfaces with the hardware for overclocking, and even when the overclock is not enabled, that interface can cause instability.


Update the following driver:
Code:
synusb64.sys Fri Jun 26 07:30:11 2009 (4A44CD63)
The above is your SIA Syncsoft USB protection software. If you cannot find an update for it, I would recommend removing it.


Crashes point to memory. We should check your RAM compatibility. Download and install CPU-Z and Upload screenshots of the CPU, Mainboard, Memory, and SPD tabs. In the SPD tab, upload an image of each slot.
Did you not read my post at all? I said I already have Malwarebytes. And I WILL NOT uninstall syncsoft software because I NEED it, it is also as up to date as it can possibly get. If I can't use Syncsoft USB software I mind as well just throw my computer in the trash because that is the main use for it.

I attached the CPU-Z Screenshots


My System SpecsSystem Spec
.
15 Jun 2012   #12
z3r010

 

If you want to be rude to those helping please go elsewhere as I will not allow it here.

Somebody has given there own time to try to help you out, the least you can do is thank them and give a civil response.
My System SpecsSystem Spec
15 Jun 2012   #13
writhziden

Windows 7 Home Premium 64 Bit
 
 

Thank you John. I appreciate you jumping in.


Malwarebytes is great for catching malware. It does not stop most viruses or hacks to the system. Malware and viruses/hacks are often considered separate entities.


You will also note that I said I recommend removing it. I did not say you had to. It is your system, and it is your choice what to do with it and how to handle it. If you want to keep it, you may consider contacting the developer of that driver and asking for their support(Syncsoft? I find no mention of them with a cursory Google search to help you contact them, but an in depth Google search may help you succeed where I failed). My apologies for not being more helpful in this regard.


Your processor will only support up to 667 (1333) MHz on the RAM; that is a likely candidate for your crashes.
Quote:
Support for unregistered DIMMs up to PC2 8500(DDR2-1066MHz) and PC3 10600 (DDR3-1333MHz)
The above quote was taken from: AMD Phenom

Further reading:

System Building and Compatibility

AMD Memory for Systems
My System SpecsSystem Spec
.

16 Jun 2012   #14
RushPfeiffer

Windows 7 Home Premium x64
 
 

Quote   Quote: Originally Posted by z3r010 View Post
If you want to be rude to those helping please go elsewhere as I will not allow it here.

Somebody has given there own time to try to help you out, the least you can do is thank them and give a civil response.
Sorry, I get over zealous and too aggitated sometimes with these stupid errors.

I apologize.


But anyway, yeah I'm gonna take a guess say it's the RAM then I'll have to order some 1333 RAM.
My System SpecsSystem Spec
23 Jun 2012   #15
RushPfeiffer

Windows 7 Home Premium x64
 
 

Ok so I'm still getting alot of BSOD's. I just replaced my RAM with the propper RAM for my CPU. 10600, 1333 MHz.

I'm guessing it's CPU by now.
Attached the dump files.
My System SpecsSystem Spec
25 Jun 2012   #16
writhziden

Windows 7 Home Premium 64 Bit
 
 

Glad you replaced the memory. That should yield better stability going forward.

Your crashes still point to memory, however. Your processor memory controller may be damaged as you say, or it could be your motherboard. Check your processor:Please provide your idle temperatures and your temperatures under stress.


Also, you still have not run the security checks for viruses/malware or installed antivirus software yet. The crashes you are getting may indicate malware/viruses on the system.


Your crashes also may indicate that you bought incompatible RAM. James has mentioned this in your other thread. Given that you cannot follow our instructions, I feel it is best if I leave you to your own methods. I need to help people who will help themselves.
My System SpecsSystem Spec
Reply

 BSOD 0x00000024 related to USB eLiscenser driver?




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
BSOD - Most likely GPU driver related
I just installed a Gigabyte G1 970 GPU in my computer, replacing a 6970 GPU. Before installing the new drivers, I uninstalled the ATI drivers via ATI's uninstaller followed by a reboot. After installing the GeForce drivers, I am getting occasional BSOD's when closing games (Half Life 2: Episode 2...
BSOD Help and Support
BSOD Probably related to video driver
Hey guys, So recently I've been getting quite a few BSODs from my 6 month old laptop. For the research I've installed bluescreenview to see what is causing the crashes. Here is the logs for the most recent crash I had (Which is about 20 mins earlier): ...
BSOD Help and Support
Random BSOD, likely driver related?
Hello all! I recently built a new computer. I installed Windows 7 Ultimate x64 and all of my drivers, and everything seemed to be going fine until I received a BSOD my second day into having completed the build. Things I've tried: * Running Memtest86. I only had time to let it complete...
BSOD Help and Support
BSOD related to Garmin USB driver?
I recently build a new Sandy Bridge computer to replace an older Conroe system. The new build retained the SSD (OS and programs) drive and the SATA data drives along with the existing Win7/64HP installation. I built an Asus P8Z68V Pro with an Intel i5-2500k and DDR3-1333 ram (12GB). I did not...
BSOD Help and Support
BSOD on shutdown, usb driver related
Hi, I recently installed an USB 2.0 PCI card with VIA v6212l chipset to use with an USB Arcade stick for playing games (the stick has faulty drivers and requires via chip to work) It works just fine, until I try to shut down the pc. After removing the card, I stopped getting a BSOD. So...
BSOD Help and Support
BSOD Crashes, driver related?
I've been having problems for a few days now. At first I thought it was driver related as one of my hardware devices was showing up as 'Unknown' but that's been taken care of. I thought I had cured it because I didn't get BSOD for a couple days, but I've gotten it 3 times today. Kernel-power...
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 17:35.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App