Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: BSOD (Locale ID 2057) at random times

09 Jun 2012   #1
twb2k8

Windows 7 64-Bit
 
 
BSOD (Locale ID 2057) at random times

I am running on a Windows 7 64-Bit. It was put together and Windows 7 installed a few days ago (Wednesday 6th June 2012) from brand new parts. I have a link that contains details for most of my build, if any other details are required, I should be able to provide them. I heard the problem may be something to do with my 400w PSU, but I'm not sure.

When it crashes, I usually do not see a blue screen, but I have seen it once. It usually just freezes for a second and my monitor goes black and I the computer restarts with the option to go into safe mode.

The crash only seemed to happen after I connected my USB WLAN Adapter on Thursday. Before that I was running Crysis on max with no crashes. I have attached the files required, if anything else is needed, please let me know. The crash has happened during internet browsing, gaming and similar tasks, but I have not experienced it whilst it is idle or downloading files.

Thanks in advance for the help!

EDIT: Here is a copy of the error I receive when I restart:
Quote:
Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7601.2.1.0.768.3
Locale ID: 2057

Additional information about the problem:
BCCode: 1
BCP1: FFFFF880012A21F8
BCP2: 0000000000000000
BCP3: 000000000000FFFF
BCP4: 0000000000000001
OS Version: 6_1_7601
Service Pack: 1_0
Product: 768_1

Files that help describe the problem:
C:\Windows\Minidump\060912-16161-01.dmp
C:\Users\Timothy\AppData\Local\Temp\WER-28688-0.sysdata.xml

Read our privacy statement online:
http://go.microsoft.com/fwlink/?link...8&clcid=0x0409

If the online privacy statement is not available, please read our privacy statement offline:
C:\Windows\system32\en-US\erofflps.txt



My System SpecsSystem Spec
.
09 Jun 2012   #2
writhziden

Windows 7 Home Premium 64 Bit
 
 

Code:
fffff880`04811000 fffff880`04819000 ASACPI ASACPI.sys Sun Mar 27 20:30:36 2005 (42476C4C)
Older versions of ASACPI.SYS are a known BSOD problem on Windows 7. Update the driver by:
  1. Going to the Asus motherboard support site
    When you reach the website:
  2. Scroll down the page and click Utilities
  3. Hold Ctrl and press f (ctrl+f) to enter the browser's find feature
  4. Search for "ATK0110 driver for WindowsXP/Vista/Win7 32&64-bit" (without quotes)
  5. Download and install the driver.
  6. After installation is complete, verify that it installed correctly.
    • Click Start Menu
    • Click My Computer
    • Go to C:\WIndows\System32\drivers\
    • Verify that the ASACPI.SYS file is dated 2009 or newer (2010,etc.)




You have a 0x124 hardware bugcheck. If the system is still under warranty, I would recommend sending it in to have diagnostic tests done and any bad hardware replaced.
warning   Warning
Before you proceed with the following, answer these two questions: Are you still under warranty? Does your warranty allow you to open up the machine to check hardware? If you are unsure of the answers to these questions, contact your system manufacturer. WARNING: The steps that follow can void your warranty!!!



For your hardware stop 0x124 crash, read through Stop 0x124 - what it means and what to try and use the following hardware checks to supplement that link.
  • If you are overclocking any hardware, please stop.

  • Monitor temperatures during the following tests.
    Use the following programs to monitor the temperatures.
  • Run the boot version of Memtest86+ paying close attention to Parts 2 and 3 of the tutorial. Also, in case Memtest86+ misses anything and comes up with no errors, run the extended version of the Windows Memory Diagnostics Tool for at least five passes. These you may want to run overnight since they take a long time to complete (run them an hour before bed each of the next two nights and check before going to sleep that they are still running).

    For Part 3: If You Have Errors: If you swap any memory components, follow these steps for ESD safety:
    1. Shut down and turn off your computer.
    2. Unplug all power supplies to the computer (AC Power then battery for laptops, AC power for desktops)
    3. Hold down the power button for 30 seconds to close the circuit and ensure all power drains from components.
    4. Make sure you are grounded by using proper grounding techniques, i.e. work on an anti-static workbench, anti-static desk, or an anti-static pad. Hold something metallic while touching it to the anti-static surface, or use an anti-static wristband to attach to the anti-static material while working. If you do not have an anti-static workbench, desk, or pad, you can use your computer tower/case by finding a metal hold in it, such as a drive bay.
    Once these steps have been followed, it is safe to remove and replace components within your computer.

Remember to read closely through Stop 0x124 - what it means and what to try for the crash.
My System SpecsSystem Spec
09 Jun 2012   #3
twb2k8

Windows 7 64-Bit
 
 

Thanks for the quick reply. I have updated the driver as you told me too and it is now dated 14/05/2009. However, it has just crashed again. I'm not sure how I would send the system in for testing as I have built it myself. Any other ideas?

I have not over clocked and my temperatures are around 30 degrees Celsius.
My System SpecsSystem Spec
.

09 Jun 2012   #4
writhziden

Windows 7 Home Premium 64 Bit
 
 

You need to go through all the steps in the link I gave including swapping out components. One of those steps is:

Strip down your system to run only the bare essentials: one RAM module, the CPU, motherboard, one hard disk, one graphics card (or use onboard graphics if you have it), keyboard, mouse, and one monitor. See how the system behaves by running Windows for twice as long as it typically takes for you to get a crash. If it is stable, add one piece of hardware back at a time until you get crashes again. Take notes of what hardware you add and how the system responds to the hardware changes.

As you add and remove hardware, follow these steps for ESD safety:
  1. Shut down and turn off your computer.
  2. Unplug all power supplies to the computer (AC Power then battery for laptops, AC power for desktops)
  3. Hold down the power button for 30 seconds to close the circuit and ensure all power drains from components.
  4. Make sure you are grounded by using proper grounding techniques, i.e. work on an anti-static workbench, anti-static desk, or an anti-static pad. Hold something metallic while touching it to the anti-static surface, or use an anti-static wristband to attach to the anti-static material while working. If you do not have an anti-static workbench, desk, or pad, you can use your computer tower/case by finding a metal hold in it, such as a drive bay.
Once these steps have been followed, it is safe to remove and replace components within your computer.
My System SpecsSystem Spec
09 Jun 2012   #5
twb2k8

Windows 7 64-Bit
 
 

Ahhh, I didn't properly check that part, sorry. Thanks very much, I'll give it a try.
My System SpecsSystem Spec
09 Jun 2012   #6
writhziden

Windows 7 Home Premium 64 Bit
 
 

You're welcome. Let us know how things turn out.
My System SpecsSystem Spec
Reply

 BSOD (Locale ID 2057) at random times




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
BSOD at random intervals - Locale ID 2057
Hi, this has been happening at completely random intervals with different programs running. I'll post some minidumps further down in hopes of eliminating the problems, I will also list various things I've already tried. Please note I'm not a very tech savvy person, most of the things I've tried...
BSOD Help and Support
Random BSOD Locale ID 2057 help
I've been getting this bsod with "Locale ID 2057" quite often and wondering if someone here can help me find a way to resolve is issue. I'm also getting random hanging/freezes. I've tried using the SF_Diagnostic_Tool but the SF_ folder is not present after running it and doesn't show up on my...
BSOD Help and Support
BSOD at Random times. Locale ID 1033 BCCode 3B
First let me start off with saying good afternoon to the members of the seven forums, today i'm here to ask you for some advice and help regarding my custom built gaming computer. Up until a few weeks ago my computer was running perfectly then all of a sudden the screen started flickering while...
BSOD Help and Support
BSOD - Locale ID: 2057
The BSOD usualy occours when browsing the web and not so much when playing games. I've had several different blue screen headers usually at the bottom saying "dumping physical memory to disk" and counting upwards to 100. Here are some of the blue screen titles: IRQL_NOT_LESS_OR_EQUAL...
BSOD Help and Support
BSOD Locale: 2057
Hi, I am having recurring problems with my pc, particularly BSOD Locale 2057. I tried using the diagnostics utility and perfmon to determine the problem, but neither can finish their processes before the system crashes again. I've saved a couple of the crash reports, though, and hope someone can...
BSOD Help and Support
BSOD Locale ID: 2057
Hello, recently I have been getting the BSOD practically everytime I start up my Laptop (Acer Extensa 5620). I was therefore wondering whether anyone could provide any guidance, I have attached two of the .dmp files in zip format and the problem reports are here: Problem signature: Problem...
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 08:20.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App