Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: getting BOSD caused by page-fault-in-nonpaged-area

09 Jun 2012   #1
neelsama

windows 7 32bit
 
 
getting BOSD caused by page-fault-in-nonpaged-area

I am getting this when i start my laptop . But it does not happens in SAFE MODE. Minidump files and helth report are uploaded in the link bellow. please help
Minidump.rar
Windows_NT6_BSOD_jcgriff2.rar
Free Cloud Storage - MediaFire

My specs are:
windows7 32 bit
Intel core i5 @2.2ghz
ATI HD4300
My os is full retail and i have been using it for 4 months.
Thank you.


My System SpecsSystem Spec
.
09 Jun 2012   #2
writhziden

Windows 7 Home Premium 64 Bit
 
 

Problem Devices:
Code:
MpKsl8708cf0d	ROOT\LEGACY_MPKSL8708CF0D\0000	This device is not present, is not working properly, or does not have all its drivers installed.
Unknown Device	USB\VID_0000&PID_0000\6&296688D0&0&4	43
I find nothing related to the above. The first one may be a virus/malware. Any idea what they are?


Make sure to install Windows updates. I see Service Pack 1 is not installed and very few updates have been installed.

Crashes are pointing to memory problems or driver conflicts.
  • If you are overclocking any hardware, please stop.

  • Run the boot version of Memtest86+ paying close attention to Parts 2 and 3 of the tutorial. Also, in case Memtest86+ misses anything and comes up with no errors, run the extended version of the Windows Memory Diagnostics Tool for at least five passes. These you may want to run overnight since they take a long time to complete (run them an hour before bed each of the next two nights and check before going to sleep that they are still running).
    warning   Warning
    Before you proceed with the following, answer these two questions: Are you still under warranty? Does your warranty allow you to open up the machine to check hardware? If you are unsure of the answers to these questions, contact your system manufacturer. WARNING: The steps that follow can void your warranty!!!

    For Part 3: If You Have Errors: If you swap any memory components, follow these steps for ESD safety:
    1. Shut down and turn off your computer.
    2. Unplug all power supplies to the computer (AC Power then battery for laptops, AC power for desktops)
    3. Hold down the power button for 30 seconds to close the circuit and ensure all power drains from components.
    4. Make sure you are grounded by using proper grounding techniques, i.e. work on an anti-static workbench, anti-static desk, or an anti-static pad. Hold something metallic while touching it to the anti-static surface, or use an anti-static wristband to attach to the anti-static material while working. If you do not have an anti-static workbench, desk, or pad, you can use your computer tower/case by finding a metal hold in it, such as a drive bay.
    Once these steps have been followed, it is safe to remove and replace components within your computer.

  • An underlying driver may be incompatible\conflicting with your system. Run Driver Verifier to find any issues. To run Driver Verifier, do the following:
    a. Backup your system and user files
    b. Create a system restore point
    c. If you do not have a Windows 7 DVD, Create a system repair disc
    d. In Windows 7:
    • Click the Start Menu
    • Type verifier in Search programs and files (do not hit enter)
    • Right click verifier and click Run as administrator
    • Put a tick in Create custom settings (for code developers) and click next
    • Put a tick in Select individual settings from a full list and click next
    • Set up the individual settings as in the image and click next
      Attachment 215830
    • Put a tick in Select driver names from a list
    • Put a tick next to all non-Microsoft drivers.
    • Click Finish.
    • Restart your computer.

    If Windows cannot start in normal mode with driver verifier running, start in safe mode. If it cannot start in safe mode or normal mode, restore the system restore point using System Restore OPTION TWO.

    If you are unable to start Windows with all drivers being verified or if the blue screen crashes fail to create .dmp files, run them in groups of 5 or 10 until you find a group that causes blue screen crashes and stores the blue screen .dmp files.
    The idea with Verifier is to cause the system to crash, so do the things you normally do that cause crashes. After you have a few crashes, upload the crash reports for us to take a look and try to find patterns.

    When you are ready to disable Verifier: Start Menu -> All Programs -> Accessories -> Right click Command Prompt -> Run as administrator -> Type the following command and then Enter:
    verifier /reset
    -> Restart your computer.
My System SpecsSystem Spec
10 Jun 2012   #3
neelsama

windows 7 32bit
 
 
solved

I updated my OS and no BSOD so far. Thank you.
My System SpecsSystem Spec
.

10 Jun 2012   #4
writhziden

Windows 7 Home Premium 64 Bit
 
 

Good to see. You're welcome.

Let us know if you need further help or report back when you are confident the problem is solved. If the problem is solved, you may also mark the thread solved.
My System SpecsSystem Spec
Reply

 getting BOSD caused by page-fault-in-nonpaged-area




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
page fault in nonpaged area
BSOD after i log into windows im not sure whats causing it i know its not one of my parts cause all of it is fairly new and its been running fine for a few months. Im going to upload the bare dmp file cause i cant use DM log while im in safe mode and these are my computer specs. Windows 7 Home...
BSOD Help and Support
Page Fault In Nonpaged Area
After more than 100 PFN_LIST_CORRUPT and one Memory Management BSOD, I get this now: Page Fault In Nonpaged Area What is the cause of this? Here is my dump file
BSOD Help and Support
Page Fault in NonPaged Area
Dear all, I've bought a new system (it's an Intel I7 with 16GB RAM) and I've just installed Windows 7 64bits Professional Edition. I'm trying to copy a large amount of data (180GB aprox) from another PC by using a external USB disc and the machine keeps panicing with the page fault in...
BSOD Help and Support
page fault in nonpaged area
system crashed without any notable events. bsod error stated page fault in nonpaged stop error 0x050. system automatically restarted. unable to boot. launched startup repair, but it was unable to repair the problems. attempted system restore, but no restore points were found. restarted system and...
BSOD Help and Support
Page Fault in NonPaged Area
I received a Stop error when I was actually doing nothing. Just happened. I have attached the dump. I restored to a couple of days ago, and Windows had to repair my Start items. I am back up, but I don't know what happened and how I can stop it from happening again. Any insights would be...
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 09:31.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App