BSOD ntoskrnl.exe+1f1e800

Page 1 of 2 12 LastLast

  1. Posts : 8
    Windows 7 64bit
       #1

    BSOD ntoskrnl.exe+1f1e800


    It doesn't always happen because of this error, but it usually in the list of why the computer crashed. The crashes happen more often when I first start up my computer. They also tend to happen when playing different games, it is very random.

    Here is a list of things I have tried
    -Re-installed Windows
    -Formatted Computer
    -New Hard Drive
    -Replaced Ram, I found out the ones I had where the wrong timing
    -Tried a different Graphics card
    -New Larger and more Temp stable heat sink for CPU

    Here are some Specs (You can also view these in my profile)
    OS-Windows 7 64bit
    CPU-AMD Phenom II X4 955, 3200 Mhz 4 Core
    Motherboard-ASUS M4A77TD Pro
    Memory-4gb(2x2gb) DDR3
    Graphics Card(s)-NVIDIA GeForce GTS 250 1gb
    Hard Drives-2x 400gb

    I have attached the files your forum post asked me too. The Performance and Health file said there was something wrong with my services, I could not find anything wrong in there. Unless I was looking for the wrong thing. Any and all help will be appreciated. I have been fighting this problem for more than a year now.

    Thank You
      My Computer


  2. Posts : 1,413
    Windows 7 Home Premium x64
       #2

    Welcome to Seven Forums MarkMN. There is a lot of .dmps there. While I am going over them, I noticed a few things you need to do;
    1. It would seem that you have some severely corrupted OS files. Please run SFC /SCANNOW run it three times, rebooting in between each pass.
    2. You have BOTH M.S.E. and AVG installed. Please remove AVG 2011.

    After you do these two things, post back with the results.

    Thanks.
      My Computer


  3. Posts : 8
    Windows 7 64bit
    Thread Starter
       #3

    After I posted this thread I checked around and found this POST. After doing what it said there, I stopped getting the blue screens when I would start up. I stopped using AVG after I got MSE. After using the AVG remover there is still the file and lists it in the programs list. It does not allow me to remove it. It does say in the cmd window that pops up that everything is uninstalled, but I still can't delete the files in my program folder. I ran the scannow and it said that it did not find any integrity violations. My computer did Blue Screen the first time I started running it.
      My Computer


  4. Posts : 1,413
    Windows 7 Home Premium x64
       #4

    MarkMN, after speaking with one of my peers, we think that you should uninstal MSE, reinstall AVG, rerun the AVG uninstaller and see if the uninstall works. If the uninstall is successful, go ahead and reinstall MSE.

    Also, please upload the fresh .dmp.

    Install Malwarebytes Free, do not start the trial, and run a FULL scan on ALL user accounts.

    Run a Disk Check and also, download SeaTools and test your Drive with it as well.
      My Computer


  5. Posts : 8
    Windows 7 64bit
    Thread Starter
       #5

    I was able to remove the AVG after uninstalling MSE and install/removing AVG fresh. This malwarebytes is taking way longer to scan than I first thought it would. Here is my new crash dump, I'll post after work if anything comes up on the scans. Thanks again for all your help.
      My Computer


  6. Posts : 8
    Windows 7 64bit
    Thread Starter
       #6

    Both scans came up with nothing. Malware found nothing, and check dsk said drive was clean. The seatools couldn't be launched because I need a seagate HDD to use it. I haven't had any crashes since the one yesterday that I posted. I'll post the dump file if another one happens.
      My Computer


  7. Posts : 1,413
    Windows 7 Home Premium x64
       #7

    I note that most of your drivers seem to be up to date. But your BIOS is behind by about 6 updates. I checked to see if your processor is listed on your current BIOS, the problem is that there are multiple versions of your processor. One is supported on your current BIOS, the others are not. I note that your BIOS version is 0803. A large amount of the BIOS changes address system stability and processor compatibility. Understand, that if you choose to update the BIOS, you do so at your own risk. Here is the link for your BIOS update. I will post mack with more information.
      My Computer


  8. Posts : 8
    Windows 7 64bit
    Thread Starter
       #8

    Here is my newest dump file. Updated Bios also.
    Last edited by MarkMN; 13 Jun 2012 at 13:00. Reason: Updated Bios
      My Computer


  9. Posts : 1,413
    Windows 7 Home Premium x64
       #9

    What were the results of the Disk Check? Disk Check
    Also, give Memtest86 a run, here's a tutorial.
      My Computer


  10. Posts : 1,413
    Windows 7 Home Premium x64
       #10

    I recommend updating your Video driver to the latest version. NVIDIA - Download Drivers

    Also, I am going to recommend that you enable driver verifier.
    writhziden said:
    An underlying driver may be incompatible\conflicting with your system. Run Driver Verifier to find any issues. To run Driver Verifier, do the following:
    a. Backup your system and user files
    b. Create a system restore point
    c. If you do not have a Windows 7 DVD, Create a system repair disc
    d. In Windows 7:
    • Click the Start Menu
    • Type verifier in Search programs and files (do not hit enter)
    • Right click verifier and click Run as administrator
    • Put a tick in Create custom settings (for code developers) and click next
    • Put a tick in Select individual settings from a full list and click next
    • Set up the individual settings as in the image and click next
    • Put a tick in Select driver names from a list
    • Put a tick next to all non-Microsoft drivers.
    • Click Finish.
    • Restart your computer.


    If Windows cannot start in normal mode with driver verifier running, start in safe mode. If it cannot start in safe mode or normal mode, restore the system restore point using System Restore OPTION TWO.


    If you are unable to start Windows with all drivers being verified or if the blue screen crashes fail to create .dmp files, run them in groups of 5 or 10 until you find a group that causes blue screen crashes and stores the blue screen .dmp files.
    The idea with Verifier is to cause the system to crash, so do the things you normally do that cause crashes. After you have a few crashes, upload the crash reports for us to take a look and try to find patterns.

    When you are ready to disable Verifier: Start Menu -> All Programs -> Accessories -> Right click Command Prompt -> Run as administrator -> Type the following command and then Enter:
    verifier /reset
    -> Restart your computer.
      My Computer


 
Page 1 of 2 12 LastLast

  Related Discussions
Our Sites
Site Links
About Us
Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd
All times are GMT -5. The time now is 16:05.
Find Us