Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: BSOD when S3/reboot resume, DRIVER_POWER_STATE_FAILURE error 0x9f

11 Jun 2012   #1
tony2wu

Windows 7 Ultimate 32bit
 
 
BSOD when S3/reboot resume, DRIVER_POWER_STATE_FAILURE error 0x9f

Dears,
We use Intel Cedar trail platform.
When we run S3/reboot long time test, system occurs BSOD issue.
The error message is DRIVER_POWER_STATE_FAILURE, and error code is 0x9f.

The detail information is in attachment.

Any suggestion for us?
Thanks for your help.


My System SpecsSystem Spec
.
11 Jun 2012   #2
writhziden

Windows 7 Home Premium 64 Bit
 
 

Security Software: ??? Make sure to install security software. I recommend either of these:
After installing your security software, update it, and then run full scans today with each program. Report back the results of the scans.


Crashes related to your USB devices:
  • What USB devices are you using? I see a Sierra Wireless USB Modem.

    USB Wireless Network Adapters are inherently unstable. USB ports do not provide the necessary power for such devices to work reliably, so the devices can cause crashes.

  • Start with USB Driver - General Fix for Problems to resolve the USB issues. Also, USB ports can sometimes enter a safe power state to protect the system from power surges due to USB devices. To reset the USB ports to a nominal power state:
    1. Shut down and turn off the computer.
    2. Unplug the computer from the wall or surge protector (then remove the battery if it is a laptop).
    3. "Remove the computer from any port replicator or docking station, disconnect
      cables to printers or devices such as external monitors, USB memory sticks or SD cards, headset or external speakers, mouse or auxiliary keyboard, turn off WIFI and Bluetooth wireless devices." (Use Hard Reset to Resolve Hardware and Software Issues HP Pavilion dv5000 Notebook PC series - HP Customer Care (United States - English))
    4. Hold down the power button for 30 seconds. This closes the circuit and ensures all
      power from components is drained to clear the software connections between the BIOS
      and hardware and clear any corruption in the temporary memory.
    5. (If it is a laptop, plug the battery back into the laptop and then) Plug the computer back into the wall. Do not reconnect any unnecessary peripherals; monitor, keyboard,
      and mouse should suffice and be the only peripherals reconnected.
    6. Turn it on to reinitialize the software connections between the BIOS and hardware
My System SpecsSystem Spec
Reply

 BSOD when S3/reboot resume, DRIVER_POWER_STATE_FAILURE error 0x9f




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
Blue Screen: DRIVER_POWER_STATE_FAILURE 0x9F
I have tried everything I can do to get this error to resolve and even swapped out my graphics card and I still can not get the random crashes to stop. Even going back to stock drivers have been unsuccessful and I am frustrated that nothing is working and random restarts.
BSOD Help and Support
Random BSOD's, Driver_Power_State_Failure Stop 0x9f
Hello to all. I've been getting BSOD's on my new laptop ASUS N76VZ, about once per day and they didn`t occure to some reasons - it happens when I watch youtube, when I watch a movie and so on. I think it happens only when I start my machine from hibernate or sleep mode, but I can not understand...
BSOD Help and Support
BSOD on shutdown - DRIVER_POWER_STATE_FAILURE 0x9F 0x3
I would greatly appreciate some help in tracking down this problem. Thank you so much for your valuable time and expertise! THANK YOU. Problem: Upon shutdown, Windows 7 will say shutting down for about 8 minutes and then blue screen. Otherwise, the pc runs fine; it just won't shutdown. ...
BSOD Help and Support
BSOD after exiting Star Trek Online, DRIVER_POWER_STATE_FAILURE, 0x9F
Greetings everyone, Recently I start having random DRIVER_POWER_STATE_FAILURE BSODs generally after exiting Star Trek Online. I used to have a TDR 0x116 BSOD error which I solved by reverting to a previous version of my GPU driver and deactivating the TDR from registry. The new 0x9F error happens...
BSOD Help and Support
Random BSOD's, Driver_Power_State_Failure Stop 0x9f...
Hi all. I've been getting seemingly random BSOD's, about once per day, whilst using a newly built PC. Today, I got one right as I was typing an email. I've yet to encounter an error like this in any of the past 11 systems I've put together, and after 2 days of installing programs, I'm mortified...
BSOD Help and Support
0x9F DRIVER_POWER_STATE_FAILURE Help!
Recently my father has asked me to put my computer to sleep at night. After doing so, putting it to sleep or even shutting the computer off will cause it to bluescreen. I have recently updated my bios (flashed them) I have bought and installed a new video card I once attempted to overclock but...
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 10:20.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App