Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: BSOD After Start up Error 0x124

11 Jun 2012   #1
Meharris

Windows 7 Professional X64
 
 
BSOD After Start up Error 0x124

Windows 7 Pro x64
-This is the original OS and I bought it retail. It has been reinstalled
-I bought the hardware in Dec 2011 and about 5 months after started having the problems.

CPU: Intel Core i7 2006k 3.4g LGA 1155
MB: Asus P8P67 pro Rev 3.1
Mem: Kingston HyperX grey Series 4GB x4
GPU: EVGA GeForce GTX 580(Fermi)
HD: Western Digital RE4 500GB
PSU: Crosair Pro Series HX850 850w
Case: Corsair Obsidian Series 800D
Cooling: Corsair CAFA70 120mm CPU cooler

I also have:
LITE-On Internal 12x blue-ray
Linksys WMP600N PCI wireless Adaptor

Description of the problem:
I built this computer in December, and it worked fine for about 5 months. Then one night it started blue screening with an error x124. All attempts to repair it with the windows disk resulted in a blue screen. Eventually the boot manager was corrupted.
I tried to reinstall the OS and every time it ended in a BSOD error x124. I did eventually get the OS installed (sheer luck) and the Manufactures drivers in stalled. Since it was an x124 I ran some tests:
-I checked the memory with Memtest86+ (7 passes)
-I tested the hard drive with Seagate Tools
-I used a volt meter to test the PSU
-Ran a stress test on the CPU (from Intel)
-Ran a stress test on the GPU (from Asus diagnostics)
Thanks for your time and suggestions would be helpful.


My System SpecsSystem Spec
.
12 Jun 2012   #2
usasma
Microsoft MVP

 
 

Running all 50 memory dumps on the off chance that at least one will have a clue. It's gonna take a while tho' - so on with the rest of the stuff.

SP1 isn't installed, please do the following:
Quote:
Installing Windows 7 Service Pack 1
1. Visit the PC manufacturer's website and update ALL drivers. DO NOT use Windows Update or the "Update drivers" function of Device Manager.
2. Check Device Manager for any unknown/disabled devices - if there are unknown/disabled devices, fix them with the latest drivers from the device manufacturer's website (not the PC Manufacturer)
3. Visit Windows Update and get all updates (may take repeated visits)
4. Visit Windows Update and get Service Pack 1 (usually under Important Updates). Read these notes for installing SP1: Steps to follow before you install Windows 7 SP1 and Windows Server 2008 R2 SP1 from the Microsoft Download Center
5. Visit Windows Update and get any other available updates. May take repeated visits, but keep it up until you get several "Windows is updated" results.
If you're having difficulties with installing a Service Pack, please use the SURTool from this link: What is the System Update Readiness Tool?
Also, check out this troubleshooting link from Microsoft: Troubleshoot problems installing Service Pack 1 (SP1) for Windows 7 and Windows Server 2008 R2

I have had limited success in installing updates/Service Packs when using a "clean boot". I suspect that I'm just bypassing the problem - and that it can come back to bite me in the butt later on.
More to follow when the memory dumps are finished running.....
My System SpecsSystem Spec
12 Jun 2012   #3
usasma
Microsoft MVP

 
 

Darned thing crashed on me. Here's the info from the latest crash dump

I'm rerunning all 50 dumps. I'll post back later on if they succeed.

Networking drivers date from 2009 - so they must be updated also.

The following info is just FYI, I've already addressed the issues that I saw in the above paragraphs

- Further info on BSOD error messages available at: http://www.carrona.org/bsodindx.html
- Info on how to troubleshoot BSOD's (DRAFT): http://www.carrona.org/userbsod.html
- How I do it: http://www.carrona.org/howidoit.html

3RD PARTY DRIVERS PRESENT IN THE DUMP FILES
Code:

jraid.sys    Tue Aug 10 05:28:44 2010 (4C611BCC)
amdxata.sys  Tue May 19 13:56:59 2009 (4A12F2EB)
iaStor.sys   Tue Apr 26 14:06:18 2011 (4DB7099A)
e1c62x64.sys Wed Jul 20 12:37:53 2011 (4E270461)
HECIx64.sys  Wed Nov 09 19:52:25 2011 (4EBB2049)
asmtxhci.sys Mon Nov 15 06:01:16 2010 (4CE112FC)
netr28x.sys  Fri Jun 19 03:56:06 2009 (4A3B4496)
nvhda64v.sys Tue Jan 17 07:45:46 2012 (4F156D7A)
asmthub3.sys Mon Nov 15 06:01:23 2010 (4CE11303)
nvlddmkm.sys Wed Feb 29 13:04:52 2012 (4F4E68C4)
http://www.carrona.org/drivers/driver.php?id=jraid.sys
http://www.carrona.org/drivers/driver.php?id=amdxata.sys
http://www.carrona.org/drivers/driver.php?id=iaStor.sys
http://www.carrona.org/drivers/driver.php?id=e1c62x64.sys
http://www.carrona.org/drivers/driver.php?id=HECIx64.sys
http://www.carrona.org/drivers/driver.php?id=asmtxhci.sys
http://www.carrona.org/drivers/driver.php?id=netr28x.sys
http://www.carrona.org/drivers/driver.php?id=nvhda64v.sys
http://www.carrona.org/drivers/driver.php?id=asmthub3.sys
http://www.carrona.org/drivers/driver.php?id=nvlddmkm.sys


BSOD BUGCHECK SUMMARY
Code:

Loading Dump File [C:\Users\FUBAR\_jcgriff2_\dbug\__Kernel__\061112-20498-01.dmp]
Built by: 7600.16385.amd64fre.win7_rtm.090713-1255
Debug session time: Mon Jun 11 16:05:24.949 2012 (UTC - 4:00)
System Uptime: 0 days 0:04:19.901
Probably caused by : hardware
BUGCHECK_STR:  0x124_GenuineIntel
DEFAULT_BUCKET_ID:  VISTA_DRIVER_FAULT
PROCESS_NAME:  TrustedInstall
FAILURE_BUCKET_ID:  X64_0x124_GenuineIntel_PROCESSOR_CACHE
Bugcheck code 00000124
Arguments 00000000`00000000 fffffa80`10011028 00000000`f602af40 00000000`00040150
BiosVersion = 3207
BiosReleaseDate = 04/02/2012
CPUID:        "Intel(R) Core(TM) i7-2600K CPU @ 3.40GHz"
MaxSpeed:     3400
CurrentSpeed: 3411
ииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииии``
  
  
My System SpecsSystem Spec
.

12 Jun 2012   #4
usasma
Microsoft MVP

 
 

Failed again - we'll try other stuff once you've followed the suggestions above.
My System SpecsSystem Spec
12 Jun 2012   #5
Meharris

Windows 7 Professional X64
 
 

Usasma,
Thank you for your responses. I have been attempting to run windows update but with very little luck as the BSOD happen a little bit after start up. I did recheck all the drivers and updated the wireless device. I’m going to try updating windows some more tomorrow. Again thank you for your response.
Meharris
My System SpecsSystem Spec
13 Jun 2012   #6
usasma
Microsoft MVP

 
 

Try:
- download a full copy of SP1. It's the 3rd one from the bottom on this page: Download: Windows 7 and Windows Server 2008 R2 Service Pack 1 (KB976932) - Microsoft Download Center - Download Details It's the one that says: windows6.1-KB976932-X64.exe 903.2 MB
Make sure that you follow the advice on installing SP1 from that page.

- uninstall the wireless USB device and physically remove it from your system.

- then try to install SP1 without connecting to the internet.
My System SpecsSystem Spec
Reply

 BSOD After Start up Error 0x124




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
BSOD while on Firefox, error 0x124
Hello, I've lurked a bit on this forum in my search for some solutions of why my laptop has been BSODing and I haven't really come across any reasons why. I know that this error is a hardware error but I'd like more details. I've uploaded my dump files with SF tool and hopefully you guys can...
BSOD Help and Support
Bsod playing Gta 4, Error 0x124
Hi, I got Bsod while Im playing Gta 4. After 10minutes to 1 hour. I Googled and read that it could be overheating. I haved run Prime95 and i got Bsod. Thx Best Regards
BSOD Help and Support
BSOD Playing BF3, error 0x124
OS Windows 7 Home Premium x64 Retail Version Processor AMD Phenom II X6 1100T x64 Motherboard MSI NF750-G55 Ram 8GB DDR3 Graphics Card EVGA GeForce GTX 670
BSOD Help and Support
BSoD on after Login, error 0x124
So I built a new computer a couple of days ago. . . and all was well. I got my new drivers, my favorite applications, and games, and was all good. . . but then I logged in one time, started up some applications, and BAM, STOP error. I rebooted, did nothing for 2 minutes, and BAM, STOP error. I...
BSOD Help and Support
BSOD error 0x124
Hello, I have II Xeon E5462 processors on an TYAN PW5400 motherboard and I'm facing the "famous 0x124" BSOD message. I'm writing this thread because I'l like to check if someone could help me by seeing the Dump Analysis: Note: I 've check MemTest - Disks - Graphics Card all working fine,...
BSOD Help and Support
BSOD 0x124 halmacpi.dll error
Hi i wondered if any one could help me with a issue i am having. this is the first time i have had to start a tread as i am completely stuck. i normally am able to find the solution using the forums. basically i built a new system for a friend of mine, but unfortunately after completing...
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

й Designer Media Ltd

All times are GMT -5. The time now is 15:19.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App