Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Multiple BSOD's while booting into windows and also while working.

13 Jun 2012   #1
Sumi09

Windows 7 Ultimate X64
 
 
Multiple BSOD's while booting into windows and also while working.

Hello,

I am having issues with this newly build PC. I have a Biostar motherboard, AMD 455 processor, and GSkill 2X4=8GB Memory. The system BSOD's randomly at startup or while working. The error codes are different most of the times. I have compiled the debugging files as per directions and they are attached to this message. Please help...
Thank you.

Note: This PC is using the university's internet connection through LAN. I also have some network drives configured to it.


My System SpecsSystem Spec
.
13 Jun 2012   #2
Sumi09

Windows 7 Ultimate X64
 
 

Some BSOD Codes I have encountered: STOP: 0X00000019, 0X0000001A, 0X0000001E
My System SpecsSystem Spec
13 Jun 2012   #3
writhziden

Windows 7 Home Premium 64 Bit
 
 

Problem Devices:
Code:
Cisco AnyConnect VPN Virtual Miniport Adapter for Windows x64	ROOT\NET\0000	This device is disabled.
Is the above device disabled intentionally? If so, why?

I would recommend enabling it, updating any drivers for it, and then disabling it. That will ensure it does not cause conflicts even disabled.


Problematic Software:
Code:
Start Menu\Programs\Accessories\MSI Afterburner	ITORG\phhp.tomitalab:Start Menu\Programs\Accessories\MSI Afterburner	ITORG\phhp.tomitalab
The above software has known problems with Windows 7. I would recommend removing it.


Code:
SYMEVENT64x86.SYS Thu Apr 15 19:32:19 2010 (4BC7BE23)
SRTSP64.SYS Fri Mar 4 13:39:16 2011 (4D714DF4)
SYMEVENT64x86.SYS
SRTSP64.SYS

Your Symantec software is out of date by a year or more. Please update to the 2012 version or remove it and replace it with Microsoft Security Essentials - Free Antivirus for Windows. Whether you remove it or update it, I would recommend contacting Symantec and getting help removing/updating the software so remnants of the old software do not remain to cause conflicts with the system.

I suspect the out of date Symantec software is what is causing your crashes...
My System SpecsSystem Spec
.

16 Jun 2012   #4
Sumi09

Windows 7 Ultimate X64
 
 

Hello Writhziden,

I will make the suggested changes and will revert back with feedback after a few days. Thank you for the troubleshooting.

Sumi
My System SpecsSystem Spec
16 Jun 2012   #5
writhziden

Windows 7 Home Premium 64 Bit
 
 

You're welcome. Look forward to hearing back when you have had a chance to do the steps and test whether the system is stable or not. When I say test, I mean doing your normal routine for long enough that you feel comfortable the system is working as it should.

Best of luck!
My System SpecsSystem Spec
22 Jun 2012   #6
Sumi09

Windows 7 Ultimate X64
 
 

Hello writhziden,

Yesterday I tried to log in the problematic computer in my office, and somehow after several attempts I got into windows and tried to make a CBS.log file along with the other debugging files as usual. However, I could only get the CBS.log file before the computer BSOD'ed on me again. I was in the middle of a long explanatory post, but lost it all. I am attaching the CBS.log file from my mediafire account because of the file size limitation on this forum File Link. I also want to list the STOP codes and other messages I received while BSOD's. The following codes were encountered on different attempts to boot into windows, and several times while working in the windows:

STOP: 0X00000019, 1A, 1E, 6B, 7E, 50.
On several other occasions I received unusual STOP codes such as :
1. "STOP: C0000139 {Entry Point Not Found} The procedure entry point NtOpenFile could not be located in the dynamic link Library ntdll.dll."
2. "Stop: C000021a {Fatal System Error} The initial session precess or system process terminated unexpectedly with a status of 0X00000000 (0Xc0000428 0X00100560). The system has been shutdown."

I also found that my disk failed chkdsk and sfc scannow commands. In the end of the command prompt I could see that there were correuption in file system. I think the attached log file may reflect on which files are corrupt. One time I could boot up but then I got all sorts of error such as: "C:\Windows\System32\RpcRtRemote.dll is not designed to run on windows or it contains an error" and eventually system BSOD'ed.

Now, my office tech dept. wants to clone the existing drive so that they don"t have to install a new OS after we get a new drive replacement. But is it a good idea, thinking that the existing drive is BSOD'ing all the time. Would a clone of this drive make a new replacement drive susceptible to BSOD as well? Please advise.

Thank you.

Sumi
My System SpecsSystem Spec
22 Jun 2012   #7
Sumi09

Windows 7 Ultimate X64
 
 

I just got home from office, and my department's tech support guy worked on the machine to find out any problems. He said that the Cisco VPN agent is always disabled intentionally unless used to connected, and he also said that all the other machines in the organization (426) are using the same thing. Also, he said that the Symantec is an enterprise edition thing, and is forced to my computer by a server, so it is what it is.
After he troubleshot for almost 2 hours, and tried cloning the drive to test if a replacement worked, he concluded that the replacement drive is also BSOD'ing. Then we thought it must be something else. In the end he took out the network cable, and rebooted and then it worked without BSOD. I have come home for the weekend, but the machine is still running on one stick of RAM (I had 2 GSkill sticks installed 4 GB each) and without network cable. We hope that when we go back on Monday it is still running. Please advise.

Sumi
My System SpecsSystem Spec
24 Jun 2012   #8
writhziden

Windows 7 Home Premium 64 Bit
 
 

Understand the VPN/Symantec comments.

The crashes you listed indicate RAM as the likely suspect. It could also still be hard disk related (possibly a virus?) problem that cloned corruption onto the new drive, and I would advise a clean install on the new drive to test further. I strongly suspect a bad piece of hardware or a badly corrupted Windows install given the variety of BugCheck codes. Let us know how things are going when you check again on Monday.
My System SpecsSystem Spec
07 Jul 2012   #9
Sumi09

Windows 7 Ultimate X64
 
 

Hello Writhziden,

I went out of town for a few days, so could not follow up. Finally, the culprit was a faulty RAM. I had two sticks installed and one of them was faulty. Now after removing it everything is back to normal.
Thank you for your suggestion... Rep up!!

Sumi
My System SpecsSystem Spec
07 Jul 2012   #10
writhziden

Windows 7 Home Premium 64 Bit
 
 

You're welcome. Glad to see it solved!!
My System SpecsSystem Spec
Reply

 Multiple BSOD's while booting into windows and also while working.




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
BSOD after booting into Windows 7
Problems started about a week ago with a random shutdown. PC will boot almost all the way into windows 7, then screen turns lines of colors followed by BSOD. Programs randomly lock up. Even had BSOD from Safe Mode when I couldn't boot into Windows. Yesterday I installed a new Corsair power supply...
BSOD Help and Support
BSOD while working on multiple sites
I was in the middle of working on some web development on two different sites simultaneously, had FireFTP running, and was watching a movie on Netflix - and I got the dreaded blue screen. It wasn't up long enough for me to read it in detail but here's what I found after the computer was back up...
BSOD Help and Support
F8 button not working for XP when Duol booting with 7
if we duol boot 7 with xp , f8 option works fine for 7 , but it will not even give you the f8 option to xp advanced option, i have tried 100s times not working, i know there are other options to get to xp safe mode for example, by Run msconfig etc , and another way is to hold power button when...
Installation & Setup
HELP! BSOD when booting windows 7
laptop: toshiba satellite L350d dump file: Microsoft (R) Windows Debugger Version 6.12.0002.633 X86 Copyright (c) Microsoft Corporation. All rights reserved. Loading Dump File
BSOD Help and Support
BSOD while booting into Windows
Hello, thanks for viewing, im having a BSOD problem when booting into Windows. Only sometimes. Need to know if its a MB issue so i can submit a RMA Not sure whats causing this BSOD, but its getting a bit irritating. There is two BSOD from today. Any help would be much appreciated. Thanks
BSOD Help and Support
BSOD when booting Windows 7
After this issue appeared to be fixed by removing Daemon Tools and replacing Avast with Microsoft Security Essentials, the PC worked fine for about a while. A few days ago, howeever I started having BSODs when booting Windows. Initially I tried a system repair, but when it was over and restarted...
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 11:30.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App