Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: BSOD after updates


14 Jun 2012   #1

Windows 7 Home Premium 64bit.
 
 
BSOD after updates

Hello

I recently got updates for windows that installed, as well as update my AMD gfx drivers to 12.4

However, this has lead to me having to perform System restores upon attempting start up

I don't know whats causing the screw-ups, only that I get a 0x0A STOP if I try to launch normally, and upon restoring the drivers and updates have been uninstalled

Specs
Win 7 Home Premium 64 bit
550W PSU

Intel dual core 2.93MHz
4GB Ram
500GB HDD
ATi Radeon HD 5870

My System SpecsSystem Spec
.

14 Jun 2012   #2

Windows 7 Home Premium 64bit.
 
 

No help? I let windows update and have had no issues yet, but haven't updated ATi drivers
My System SpecsSystem Spec
15 Jun 2012   #3

Windows 7
 
 

After these updates were installed I can no longer click out of a window or use the back arrow....
My System SpecsSystem Spec
.


15 Jun 2012   #4

Windows 7 Home Premium 64 Bit
 
 

Problematic Software:
Code:
Start Menu\Programs\Spybot - Search & Destroy	Public:Start Menu\Programs\Spybot - Search & Destroy	Public


Code:
speedfan.sys Sun Sep 24 07:26:48 2006 (45168798)
Download an updated version of SpeedFan and install it; yours may be out of date.


Please disable Verifier prior to doing the next steps: Start Menu -> All Programs -> Accessories -> Right click Command Prompt -> Run as administrator -> Type the following command and then Enter:
verifier /reset
-> Restart your computer.




Your crashes are indicating hardware issues. Run some hardware checks.
  • If you are overclocking any hardware, please stop.

  • If you have an SSD, make sure the following are up to date:
    • SSD firmware
    • BIOS Version
    • Chipset Drivers
    • Hard disk controller drivers/SATA drivers
    • If you have a Marvell IDE ATA/ATAPI device, make sure the drivers are up to date from the Intel site or Marvell site and not from your motherboard/vendor support site.

  • Run all but the advanced tests with SeaTools for HDDs.
    SeaTools for Windows

    SeaTools for DOS
  • Monitor temperatures during the following tests.
    Use the following programs to monitor the temperatures.
  • Run the boot version of Memtest86+ paying close attention to Parts 2 and 3 of the tutorial. Also, in case Memtest86+ misses anything and comes up with no errors, run the extended version of the Windows Memory Diagnostics Tool for at least five passes. These you may want to run overnight since they take a long time to complete (run them an hour before bed each of the next two nights and check before going to sleep that they are still running).

    warning   Warning
    Before you proceed with the following, answer these two questions: Are you still under warranty? Does your warranty allow you to open up the machine to check hardware? If you are unsure of the answers to these questions, contact your system manufacturer. WARNING: The steps that follow can void your warranty!!!


    For Part 3: If You Have Errors: If you swap any memory components, follow these steps for ESD safety:
    1. Shut down and turn off your computer.
    2. Unplug all power supplies to the computer (AC Power then battery for laptops, AC power for desktops)
    3. Hold down the power button for 30 seconds to close the circuit and ensure all power drains from components.
    4. Make sure you are grounded by using proper grounding techniques, i.e. work on an anti-static workbench, anti-static desk, or an anti-static pad. Hold something metallic while touching it to the anti-static surface, or use an anti-static wristband to attach to the anti-static material while working. If you do not have an anti-static workbench, desk, or pad, you can use your computer tower/case by finding a metal hold in it, such as a drive bay.
    Once these steps have been followed, it is safe to remove and replace components within your computer.
My System SpecsSystem Spec
Reply

 BSOD after updates




Thread Tools



Similar help and support threads for2: BSOD after updates
Thread Forum
Windows Updates Fails configuring updates and reverts back Windows Updates & Activation
Windows Check for updates keeps running-all installation/updates fail Windows Updates & Activation
Windows wont complete updates, Security Updates KB2604121 Windows Updates & Activation
Windows 7 updates same for updates every time it checks for updates Windows Updates & Activation
BSOD After Windows updates BSOD Help and Support
MSE updates flagged in Win 7 updates but not XP Mode updates System Security

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 10:29 AM.
Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App
  

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33