Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: BSOD - usually on startup

14 Jun 2012   #1
neontetra

64bit
 
 
BSOD - usually on startup

Hi guys,

I hope I have done everything correctly as far as following the instructions to report my bsod problems.
I've noctice it usually resets and bsod after I logged into windows?
if it doesn't crash in the first few minutes upon entering windows then it seems my system would be stable for hours on end.

I have Windows 7 Enterprise edition that my brother let me used from the company he works for.

Specs-
Q9550
4.00gb
64bit operating system
Asus p5ke wifi

Ok thanks in advance for your expert advice thanks!


My System SpecsSystem Spec
.

15 Jun 2012   #2
neontetra

64bit
 
 

Bump bump 200+ views and no solutions
I have also an Intel Sdd + 3 hard drives in my system for additional info if that would be any help.
My System SpecsSystem Spec
15 Jun 2012   #3
writhziden

Windows 7 Home Premium 64 Bit
 
 

Problem Devices:
Code:
ATA Channel 0	PCIIDE\IDECHANNEL\5&36A48F33&0&0	This device cannot start.
ATA Channel 1	PCIIDE\IDECHANNEL\5&36A48F33&0&1	This device cannot start.
Please upload a screenshot of your Device Manager (Start Menu -> Type Device Manager into Search programs and files -> Hit Enter)


Problematic driver:
Code:
ASACPI.sys Sun Mar 27 20:30:36 2005 (42476C4C)
Older versions of ASACPI.SYS are a known BSOD problem on Windows 7. Update the driver by:
  1. Going to the Asus motherboard support site
    When you reach the website:
  2. Scroll down the page and click Utilities
  3. Hold Ctrl and press f (ctrl+f) to enter the browser's find feature
  4. Search for "ATK0110 driver for WindowsXP/Vista/Win7 32&64-bit" (without quotes)
  5. Download and install the driver.
  6. After installation is complete, verify that it installed correctly.
    • Click Start Menu
    • Click My Computer
    • Go to C:\WIndows\System32\drivers\
    • Verify that the ASACPI.SYS file is dated 2009 or newer (2010,etc.)


All of your crashes were DirectX/graphics card related. DirectX comes installed with Windows, so this may indicate Windows corruption. It may also be that you have corrupted drivers or a graphics card hardware problem.
  • If you are overclocking any hardware, please stop.

  • Check Windows for corruption. Run SFC /SCANNOW Command - System File Checker up to three times to fix all errors with a restart in between each. Post back if it continues to show errors after a fourth run or if the first run comes back with no integrity violations. Use OPTION THREE of SFC /SCANNOW Command - System File Checker to provide us with the sfcdetails.txt file if errors occur.


Follow the steps for Diagnosing basic problems with DirectX. To re-install your display card drivers as outlined in the DirectX link, use the following steps.
  1. Download the drivers you want for your display card(s)
  2. Click Start Menu
  3. Click Control Panel
  4. Click Uninstall a program
  5. For AMD:
    • Uninstall AMD Catalyst Install Manager if it is listed (this should remove all AMD graphics software and drivers)
    • If AMD Catalyst Install Manager is not listed, use the following method to uninstall the graphics drivers (this applies to onboard graphics, as well):
      1. Click Start Menu
      2. Right Click My Computer/Computer
      3. Click Manage
      4. Click Device Manager from the list on the left
      5. Expand Display adapters
      6. Do the following for each adapter (in case you have multiple display cards)
        • Right click the adapter
        • Click Uninstall (do not click OK in the dialog box that pops up after hitting Uninstall)
        • Put a tick in Delete driver software for this device (if this option is available, otherwise just hit OK) and hit OK
      Alternatively:
      1. Login as an adminstrative user
      2. Click Start Menu
      3. Click Control Panel
      4. Click Hardware and Sound
      5. Click Device Manager (the last link under Devices and Printers)
      6. Expand Display adapters
      7. Do the following for each adapter (in case you have multiple display cards)
        • Right click the adapter
        • Click Uninstall (do not click OK in the dialog box that pops up after hitting Uninstall)
        • Put a tick in Delete driver software for this device (if this option is available, otherwise just hit OK) and hit OK
  6. Restart your computer after uninstalling drivers for all display cards
  7. Install the driver you selected for the display cards once Windows starts

Remember to try multiple versions of the graphics drivers, download them fresh, and install the freshly downloaded drivers.





warning   Warning
Before you proceed with the following, answer these two questions: Are you still under warranty? Does your warranty allow you to open up the machine to check hardware? If you are unsure of the answers to these questions, contact your system manufacturer. WARNING: The steps that follow can void your warranty!!!


Your crashes were all 0x116 Video TDR Error crashes:

  • Quote   Quote: Originally Posted by H2SO4 View Post
    These are all stop 0x116 VIDEO_TDR_FAILURE conditions.

    It's not a true crash, in the sense that the bluescreen was initiated only because the combination of video driver and video hardware was being unresponsive, and not because of any synchronous processing exception.

    Since Vista, the "Timeout Detection and Recovery" (TDR) components of the OS video subsystem have been capable of doing some truly impressive things to try to recover from issues which would have caused earlier OSs like XP to crash. As a last resort, the TDR subsystem sends the video driver a "please restart yourself now!" command and waits a few seconds. If there's no response, the OS concludes that the video driver/hardware combo has truly collapsed in a heap, and it fires off that stop 0x116 BSOD.

    If playing with video driver versions hasn't helped, make sure the box is not overheating. Try removing a side panel and aiming a big mains fan straight at the motherboard and GPU. Run it like that for a few hours or days - long enough to ascertain whether cooler temperatures make a difference. If so, it might be as simple as dust buildup and subsequently inadequate cooling.
    The above quote was taken from http://www.sevenforums.com/crashes-d...tml#post280172, which is linked to in usasma's thread about this error. Closely follow the first three posts of usasma's thread outlining STOP 0x116: VIDEO_TDR_ERROR troubleshooting and proceed through each step. Let us know if you need further help.
My System SpecsSystem Spec
.


15 Jun 2012   #4
neontetra

64bit
 
 

Thank you very much for your detailed reply.
I will try what you have recommended when time permits.
Once again if what you suggest solve my problems I will be very grateful.

Regards
Neontetra
My System SpecsSystem Spec
Reply

 BSOD - usually on startup




Thread Tools





Similar help and support threads
Thread Forum
BSOD during windows startup; can't safe mode; startup repair can't fix
Consistent BSOD during Windows startup for both normal mode and safe mode. BSOD problem started shortly after buggy installations of Microsoft Visual C++ 2005 x64, Microsoft .Net Framework 1.1, and AMD Catalyst Drivers 13.9; and turning off Microsoft .Net Framework 3.5.1. Startup Repair is...
BSOD Help and Support
Brief BSOD on Startup, Startup Recovery Hangs
I have Win 7 Home and in the last couple of days I have been trying to do a backup onto an external drive. The problem comes in when I attempt to start my laptop so that I can begin the backup process, the screen flickers a BSOD, says startup failed and do I want to run Startup Recovery. If I say...
BSOD Help and Support
BSOD on startup, unknown error, startup repair running too long
As the title suggests, my Acer Aspire has been running startup repair for over 20 hours following a BSOD yesterday. I'm not sure if it's worth the wait so maybe you all can shed some light. Yesterday I was stressfully trying to search for something (using Chrome) and the website I was on froze;...
BSOD Help and Support
BSOD on Startup - Startup Reapir not working
On Startup, after POST, I get this BSOD: STOP: c000021a {Fatal System Error} The verification of a knownDLL failed. system process terminated unexpectedly with a status of 0xc000012f (0x00360bf0 0x00000000). The system has shut down. Upon Reboot, I am advised to go to the startup repair....
BSOD Help and Support
BSOD at startup, cant repair startup
i had a bsod 3 days ago with no reason when its at Welcome screen and my startup items are not loaded at all(all drivers programs etc.). i tried to reboot and my pc gone wild. it cant even see welcome screen cuz of bsods. also i am having black screens when booting up. sometimes its just freezes...
BSOD Help and Support
BSOD on startup , error 0x000000f4 . startup takes half an hour
so everything was fine when my laptop started to become very slow and i used to get the BSOD very often so i decided to recover the system to the initial state . i did that and everything was fine , then i updated the windows 7 service pack 1 and finished the installation and rebooted my computer ,...
BSOD Help and Support

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 16:59.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App