Getting Bluescreen when I play APB and now without playing.

BugCheck 0x116

Some of your crashes were DirectX/graphics card related. DirectX comes installed with Windows, so this may indicate Windows corruption. It may also be that you have corrupted drivers or a graphics card hardware problem.

• If you are overclocking any hardware, please stop.
  
  
• Check Windows for corruption. Run SFC /SCANNOW Command - System File Checker up to three times to fix all errors with a restart in between each. Post back if it continues to show errors after a fourth run or if the first run comes back with no integrity violations. Use OPTION THREE of SFC /SCANNOW Command - System File Checker to provide us with the sfcdetails.txt file if errors occur.

Follow the steps for Diagnosing basic problems with DirectX. To re-install your display card drivers as outlined in the DirectX link, use the following steps.

1. Download the drivers you want for your display card(s)
2. Click Start Menu
3. Click Control Panel
4. Click Uninstall a program
5. For AMD:
   • Uninstall AMD Catalyst Install Manager if it is listed (this should remove all AMD graphics software and drivers)
   • If AMD Catalyst Install Manager is not listed, use the following method to uninstall the graphics drivers (this applies to onboard graphics, as well):
     1. Click Start Menu
     2. Right Click My Computer/Computer
     3. Click Manage
     4. Click Device Manager from the list on the left
     5. Expand Display adapters
     6. Do the following for each adapter (in case you have multiple display cards)
        
        • Right click the adapter
        • Click Uninstall (do not click OK in the dialog box that pops up after hitting Uninstall)
        • Put a tick in Delete driver software for this device (if this option is available, otherwise just hit OK) and hit OK
     
     Alternatively:
     
     1. Login as an adminstrative user
     2. Click Start Menu
     3. Click Control Panel
     4. Click Hardware and Sound
     5. Click Device Manager (the last link under Devices and Printers)
     6. Expand Display adapters
     7. Do the following for each adapter (in case you have multiple display cards)
        
        • Right click the adapter
        • Click Uninstall (do not click OK in the dialog box that pops up after hitting Uninstall)
        • Put a tick in Delete driver software for this device (if this option is available, otherwise just hit OK) and hit OK
6. Restart your computer after uninstalling drivers for all display cards
7. Install the driver you selected for the display cards once Windows starts

Remember to try multiple versions of the graphics drivers, download them fresh, and install the freshly downloaded drivers.

   Warning

Before you proceed with the following, answer these two questions: Are you still under warranty? Does your warranty allow you to open up the machine to check hardware? If you are unsure of the answers to these questions, contact your system manufacturer. WARNING: The steps that follow can void your warranty!!!

One of your crashes was a 0x116 Video TDR Error crash:

• 
  
  H2SO4 said:

  These are all stop 0x116 VIDEO_TDR_FAILURE conditions.
  
  It's not a true crash, in the sense that the bluescreen was initiated only because the combination of video driver and video hardware was being unresponsive, and not because of any synchronous processing exception.
  
  Since Vista, the "Timeout Detection and Recovery" (TDR) components of the OS video subsystem have been capable of doing some truly impressive things to try to recover from issues which would have caused earlier OSs like XP to crash. As a last resort, the TDR subsystem sends the video driver a "please restart yourself now!" command and waits a few seconds. If there's no response, the OS concludes that the video driver/hardware combo has truly collapsed in a heap, and it fires off that stop 0x116 BSOD.
  
  If playing with video driver versions hasn't helped, make sure the box is not overheating. Try removing a side panel and aiming a big mains fan straight at the motherboard and GPU. Run it like that for a few hours or days - long enough to ascertain whether cooler temperatures make a difference. If so, it might be as simple as dust buildup and subsequently inadequate cooling.
  The above quote was taken from https://www.sevenforums.com/crashes-d...tml#post280172, which is linked to in usasma's thread about this error. Closely follow the first three posts of usasma's thread outlining STOP 0x116: VIDEO_TDR_ERROR troubleshooting and proceed through each step. Let us know if you need further help.

BugCheck 0x124

You have a 0x124 hardware bugcheck. If the system is still under warranty, I would recommend sending it in to have diagnostic tests done and any bad hardware replaced.

   Warning

Before you proceed with the following, answer these two questions: Are you still under warranty? Does your warranty allow you to open up the machine to check hardware? If you are unsure of the answers to these questions, contact your system manufacturer. WARNING: The steps that follow can void your warranty!!!

For your hardware stop 0x124 crash, read through Stop 0x124 - what it means and what to try and use the following hardware checks to supplement that link.

• If you are overclocking any hardware, please stop.
  
  
• If you have an SSD, make sure the following are up to date:
  • SSD firmware
  • BIOS Version
  • Chipset Drivers
  • Hard disk controller drivers/SATA drivers
  • If you have a Marvell IDE ATA/ATAPI device, make sure the drivers are up to date from the Intel site or Marvell site and not from your motherboard/vendor support site.
  
  
  
• Run all but the advanced tests with SeaTools for HDDs.
  SeaTools for Windows
  
  SeaTools for DOS
  
  
• Monitor temperatures during the following tests.
  
  Use the following programs to monitor the temperatures.
  • Real Temp is a good CPU temperature monitor.
  • Speccy - System Information - Free Download will monitor all hardware temperatures.
  • HWiNFO, HWiNFO32 & HWiNFO64 - Hardware Information and Analysis Tools can be inaccurate for CPU temperatures, but is a good program for GPU temperature monitoring.
  
  
  • Use FurMark: VGA Stress Test, Graphics Card and GPU Stability Test, Burn-in Test, OpenGL Benchmark and GPU Temperature | oZone3D.Net to test the graphics card GPU. Let it run until the GPU temperatures even out or until the GPU temperatures reach a dangerous level (you can find the max temperature for your card on either the nVidia or AMD sites; if you are not sure, ask us). The goal is to get a steady temperature, find out if the GPU is overheating, or to see if there are any artifacts present in the test itself: look for strange pixelated patterns on the screen or colors that do not look like they belong. Then use the |MG| Video Memory Stress Test 1.7.116 Download to test your graphics card memory. Let the memory test run for at least seven passes; the more the better.
    
    
  • Run Hardware - Stress Test With Prime95 to determine any hardware problems. Run all three tests for a few hours each. If you get errors, stop the test and post back here.
    
    
  • Follow the steps for doing CPU stress test using IntelBurnTest
  
  
• Run the boot version of Memtest86+ paying close attention to Parts 2 and 3 of the tutorial. Also, in case Memtest86+ misses anything and comes up with no errors, run the extended version of the Windows Memory Diagnostics Tool for at least five passes. These you may want to run overnight since they take a long time to complete (run them an hour before bed each of the next two nights and check before going to sleep that they are still running).
  
  For Part 3: If You Have Errors: If you swap any memory components, follow these steps for ESD safety:
  
  1. Shut down and turn off your computer.
  2. Unplug all power supplies to the computer (AC Power then battery for laptops, AC power for desktops)
  3. Hold down the power button for 30 seconds to close the circuit and ensure all power drains from components.
  4. Make sure you are grounded by using proper grounding techniques, i.e. work on an anti-static workbench, anti-static desk, or an anti-static pad. Hold something metallic while touching it to the anti-static surface, or use an anti-static wristband to attach to the anti-static material while working. If you do not have an anti-static workbench, desk, or pad, you can use your computer tower/case by finding a metal hold in it, such as a drive bay.
  
  Once these steps have been followed, it is safe to remove and replace components within your computer.

Remember to read closely through Stop 0x124 - what it means and what to try for the crash.

I've been REALLY busy with work and stuff last week or so but I've started to take some steps that you posted. HEre is my text file of the system scan thing. I think it said something might be corrupted?

Did you run the system file check three times? It does not appear that you did...