Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.

Windows 7: BSOD with latest video drivers

17 Jun 2012   #1

windows 7 professional 64 bit
BSOD with latest video drivers

Hi, i made a clear windows 7 professional 64 bit reinstall couple of weeks ago with a ssd boot drive, installed updates etc, and installed latest drives for
Nvidia GTS 250
however, i am frequently gettin bsod while gaming and watching video.
Error code 1E
Fix attempts so far: checked memory, checked hhd and ssd.
I am stuck :/ Will appreciate any help

My System SpecsSystem Spec

17 Jun 2012   #2

Windows 7 Home Premium 64 Bit

It is difficult to provide troubleshooting steps without the crash reports. Please follow the to provide us with the crash reports to analyze.
My System SpecsSystem Spec
18 Jun 2012   #3

windows 7 professional 64 bit

My bad, here are the required files.
My System SpecsSystem Spec

18 Jun 2012   #4

Windows 7 Home Premium 64 Bit

Crashes point primarily to memory problems.
  • If you are overclocking any hardware, please stop.

  • Run the boot version of Memtest86+ paying close attention to Parts 2 and 3 of the tutorial. Also, in case Memtest86+ misses anything and comes up with no errors, run the extended version of the Windows Memory Diagnostics Tool for at least five passes. These you may want to run overnight since they take a long time to complete (run them an hour before bed each of the next two nights and check before going to sleep that they are still running).
    warning   Warning
    Before you proceed with the following, answer these two questions: Are you still under warranty? Does your warranty allow you to open up the machine to check hardware? If you are unsure of the answers to these questions, contact your system manufacturer. WARNING: The steps that follow can void your warranty!!!

    For Part 3: If You Have Errors: If you swap any memory components, follow these steps for ESD safety:
    1. Shut down and turn off your computer.
    2. Unplug all power supplies to the computer (AC Power then battery for laptops, AC power for desktops)
    3. Hold down the power button for 30 seconds to close the circuit and ensure all power drains from components.
    4. Make sure you are grounded by using proper grounding techniques, i.e. work on an anti-static workbench, anti-static desk, or an anti-static pad. Hold something metallic while touching it to the anti-static surface, or use an anti-static wristband to attach to the anti-static material while working. If you do not have an anti-static workbench, desk, or pad, you can use your computer tower/case by finding a metal hold in it, such as a drive bay.
    Once these steps have been followed, it is safe to remove and replace components within your computer.

  • Download and install CPU-Z and Upload screenshots of the CPU, Mainboard, Memory, and SPD tabs. In the SPD tab, upload an image of each slot.
My System SpecsSystem Spec
20 Jun 2012   #5

windows 7 professional 64 bit

Thanks for your help so far.
Memtest86+ showed 0 errors after 10 runs. I am not overclocking.
Meanwhile, i have 1E, 7E and 4A BSOD errors.
Quote   Quote: Originally Posted by writhziden View Post
Crashes point primarily to memory problem.
Could you be more specific about that?
My System SpecsSystem Spec
20 Jun 2012   #6

Windows 7 Home Premium 64 Bit

I can be more specific about it once I get a little more information. Basically, I suspect that your RAM either is not compatible with the system or you have a faulty module.

Can you provide the part number of the Kingston modules? Based on the CPU-Z information, I found KHX1600C9AD3/2G, but I do not know if that is accurate or not. Please try to find your KHX*********/2G info.
My System SpecsSystem Spec
20 Jun 2012   #7

windows 7 professional 64 bit

Both modules have KHX1600C9D3B1/2G part number.
These modules were in the motherboard for 2 years already and first 1,5 years worked just fine.
My System SpecsSystem Spec
20 Jun 2012   #8

Windows 7 Home Premium 64 Bit

Integrated DRAM Controller with AMD Memory Optimizer Technology
  • A high-bandwidth, low-latency integrated memory controller
  • Supports PC2-8500 (DDR2-1066); PC2-6400 (DDR2-800), PC2-5300 (DDR2-667), PC2-4200 (DDR2-533) or PC2-3200 (DDR2-400) SDRAM unbuffered DIMMs AM2+
  • Support for unregistered DIMMs up to PC2 8500(DDR2-1066MHz) and PC3 10600 (DDR3-1333MHz) AM3
  • Up to 17.1GB/s memory bandwidth for DDR2 and up to 21GB/s memory bandwidth for DDR3
    • Benefit: Quick access to system memory for better performance.
The above quote was taken from AMD Phenom

Your RAM is intended to run at 1600 MHz and is above the 1333 MHz that is recommended for the Phenom II processor. I would recommend that you read through System Building and Compatibility

AMD Memory for Systems may also be helpful.
My System SpecsSystem Spec
20 Jun 2012   #9

windows 7 professional 64 bit

Thank you for your help Prob. i will change the processor instead of ram for an upgrade
My System SpecsSystem Spec
20 Jun 2012   #10

Windows 7 Home Premium 64 Bit

You will need to change the motherboard to upgrade to a processor that supports 1600 MHz RAM. Your current motherboard is only compatible with AM3 processors, and those only support up to 1333 MHz DDR3 RAM.
My System SpecsSystem Spec

 BSOD with latest video drivers

Thread Tools

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 04:47 PM.
Twitter Facebook Google+

Windows 7 Forums

Seven Forums Android App Seven Forums IOS App

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33