AMD graphics has crashed and recovered


  1. Posts : 59
    Microsoft Windows 7 Home Premium 64-bit 7601 Multiprocessor Free Service Pack 1
       #1

    AMD graphics has crashed and recovered


    Highly annoying and occasionally destructive. Attached image of graphics system from W7 SystemInfo.exe.

    The laptop is Win7x64, Intel i3, 4GB RAM.

    This seems to happen in WLiveMail, or streaming a webcam, or just about anywhere.

    Any hint about eliminating this would be appreciated.
      My Computer


  2. Posts : 11,269
    Windows 7 Home Premium 64 Bit
       #2

    That is essentially a 0x116 BugCheck.

    BugCheck 0x116

    All of your crashes were DirectX/graphics card related. DirectX comes installed with Windows, so this may indicate Windows corruption. It may also be that you have corrupted drivers or a graphics card hardware problem.

    • If you are overclocking any hardware, please stop.

    • Check Windows for corruption. Run SFC /SCANNOW Command - System File Checker up to three times to fix all errors with a restart in between each. Post back if it continues to show errors after a fourth run or if the first run comes back with no integrity violations. Use OPTION THREE of SFC /SCANNOW Command - System File Checker to provide us with the sfcdetails.txt file if errors occur.



    Follow the steps for Diagnosing basic problems with DirectX. To re-install your display card drivers as outlined in the DirectX link, use the following steps.

    1. Download the drivers you want for your display card(s)
    2. Click Start Menu
    3. Click Control Panel
    4. Click Uninstall a program
    5. For AMD:
      • Uninstall AMD Catalyst Install Manager if it is listed (this should remove all AMD graphics software and drivers)
      • If AMD Catalyst Install Manager is not listed, use the following method to uninstall the graphics drivers (this applies to onboard graphics, as well):
        1. Click Start Menu
        2. Right Click My Computer/Computer
        3. Click Manage
        4. Click Device Manager from the list on the left
        5. Expand Display adapters
        6. Do the following for each adapter (in case you have multiple display cards)
          • Right click the adapter
          • Click Uninstall (do not click OK in the dialog box that pops up after hitting Uninstall)
          • Put a tick in Delete driver software for this device (if this option is available, otherwise just hit OK) and hit OK

        Alternatively:
        1. Login as an adminstrative user
        2. Click Start Menu
        3. Click Control Panel
        4. Click Hardware and Sound
        5. Click Device Manager (the last link under Devices and Printers)
        6. Expand Display adapters
        7. Do the following for each adapter (in case you have multiple display cards)
          • Right click the adapter
          • Click Uninstall (do not click OK in the dialog box that pops up after hitting Uninstall)
          • Put a tick in Delete driver software for this device (if this option is available, otherwise just hit OK) and hit OK
    6. Restart your computer after uninstalling drivers for all display cards
    7. Install the driver you selected for the display cards once Windows starts


    Remember to try multiple versions of the graphics drivers, download them fresh, and install the freshly downloaded drivers.





       Warning
    Before you proceed with the following, answer these two questions: Are you still under warranty? Does your warranty allow you to open up the machine to check hardware? If you are unsure of the answers to these questions, contact your system manufacturer. WARNING: The steps that follow can void your warranty!!!


    Your crashes were all 0x116 Video TDR Error crashes:

    • H2SO4 said:
      These are all stop 0x116 VIDEO_TDR_FAILURE conditions.

      It's not a true crash, in the sense that the bluescreen was initiated only because the combination of video driver and video hardware was being unresponsive, and not because of any synchronous processing exception.

      Since Vista, the "Timeout Detection and Recovery" (TDR) components of the OS video subsystem have been capable of doing some truly impressive things to try to recover from issues which would have caused earlier OSs like XP to crash. As a last resort, the TDR subsystem sends the video driver a "please restart yourself now!" command and waits a few seconds. If there's no response, the OS concludes that the video driver/hardware combo has truly collapsed in a heap, and it fires off that stop 0x116 BSOD.

      If playing with video driver versions hasn't helped, make sure the box is not overheating. Try removing a side panel and aiming a big mains fan straight at the motherboard and GPU. Run it like that for a few hours or days - long enough to ascertain whether cooler temperatures make a difference. If so, it might be as simple as dust buildup and subsequently inadequate cooling.
      The above quote was taken from https://www.sevenforums.com/crashes-d...tml#post280172, which is linked to in usasma's thread about this error. Closely follow the first three posts of usasma's thread outlining STOP 0x116: VIDEO_TDR_ERROR troubleshooting and proceed through each step. Let us know if you need further help.


    System Specs:
    If you need help, please fill in your system specs in your profile and not in a post in this thread: System Info - See Your System Specs
      My Computer


 

  Related Discussions
Our Sites
Site Links
About Us
Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd
All times are GMT -5. The time now is 17:59.
Find Us