Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: BSOD everytime, page fault and memory management mostly.

19 Jun 2012   #1
vitaumd2

Windows 7 Ultimate x64
 
 
BSOD everytime, page fault and memory management mostly.

Hi guys, I've been having some BSOD's since forever and I can't open this dmp files so I wonder if any of you might help me. Thanks in advance, I attached the required files.


My System SpecsSystem Spec
.
19 Jun 2012   #2
vitaumd2

Windows 7 Ultimate x64
 
 

My System SpecsSystem Spec
19 Jun 2012   #3
writhziden

Windows 7 Home Premium 64 Bit
 
 

If you still have Verifier enabled, disable it: Start Menu -> All Programs -> Accessories -> Right click Command Prompt -> Run as administrator -> Type the following command and then Enter:
verifier /reset
-> Restart your computer.


Crashes primarily point to hardware issues. Run some hardware checks.
  • If you are overclocking any hardware, please stop.

  • If you have an SSD, make sure the following are up to date:
    • SSD firmware
    • BIOS Version
    • Chipset Drivers
    • Hard disk controller drivers/SATA drivers
    • If you have a Marvell IDE ATA/ATAPI device, make sure the drivers are up to date from the Intel site or Marvell site and not from your motherboard/vendor support site.

  • Run all but the advanced tests with SeaTools for HDDs.
    SeaTools for Windows

    SeaTools for DOS
  • Monitor temperatures during the following tests.
    Use the following programs to monitor the temperatures.
  • Run the boot version of Memtest86+ paying close attention to Parts 2 and 3 of the tutorial. Also, in case Memtest86+ misses anything and comes up with no errors, run the extended version of the Windows Memory Diagnostics Tool for at least five passes. These you may want to run overnight since they take a long time to complete (run them an hour before bed each of the next two nights and check before going to sleep that they are still running).

    warning   Warning
    Before you proceed with the following, answer these two questions: Are you still under warranty? Does your warranty allow you to open up the machine to check hardware? If you are unsure of the answers to these questions, contact your system manufacturer. WARNING: The steps that follow can void your warranty!!!


    For Part 3: If You Have Errors: If you swap any memory components, follow these steps for ESD safety:
    1. Shut down and turn off your computer.
    2. Unplug all power supplies to the computer (AC Power then battery for laptops, AC power for desktops)
    3. Hold down the power button for 30 seconds to close the circuit and ensure all power drains from components.
    4. Make sure you are grounded by using proper grounding techniques, i.e. work on an anti-static workbench, anti-static desk, or an anti-static pad. Hold something metallic while touching it to the anti-static surface, or use an anti-static wristband to attach to the anti-static material while working. If you do not have an anti-static workbench, desk, or pad, you can use your computer tower/case by finding a metal hold in it, such as a drive bay.
    Once these steps have been followed, it is safe to remove and replace components within your computer.
My System SpecsSystem Spec
.

Reply

 BSOD everytime, page fault and memory management mostly.




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
BSOD (Memory Management, Page Fault in Non-paged Area)
Hi, This is the first time that I've experienced this error(s) resulting in multiple BSODs. So far, I've tried clearing my cache, removing adware and scanning my files using sfc/scannow but the error(s) still persists. Hope that I can get some advice/help on what I can do to remove the error(s)...
BSOD Help and Support
BSOD Memory Management, Bad Pool Header, Page Fault
I built a computer last week and everything seemed to be going fine until earlier this week, when I had a BSOD while surfing the internet and running Folding@Home on my CPU and GPU. I didn't think much of it until I got another BSOD the next day, maybe while playing DiRT 3. The first two BSOD's...
BSOD Help and Support
BSOD - MEMORY MANAGEMENT and PAGE FAULT IN NON PAGED AREA
All, I built my PC in 2010. Ever since I have been having intermittent BSOD problems. I've found that if I put the computer to sleep instead of shutting down, when it boots stable, it will remain stable. Otherwise I have BSOD crashes 5-20 minutes after booting. I've run memtest86+ after crashes...
BSOD Help and Support
BSOD - IRQL not less or equal, Page fault, Memory Management, etc.
It started a few months ago, a game that I play often; Arma 2 crashes, a little while after I got an error saying that my system has recovered from a screen error or something like that.. I ignored it because it was just once.. I had it more often later on, started to look around on the internet...
BSOD Help and Support
Memory Management/Page fault in nonpaged area BSOD
Hey guys, just got a new PC. Board: Sabertooth P67 CPU: Intel Core i7 2600 3.4GHz Grafics: Asus Radeon HD 6770 1GB GDDR5 Memory: Corsair Vengeance 2x4GB 1600 (CMZ8GX3M2A1600C9) The thing is.. at first it installed allright with everything inside.. then it crashed like 2 times and i didnt...
BSOD Help and Support
BSOD - Memory Management and Page Fault In Non Paged Area
Hello, I built my computer about six months ago and have been having sporadic BSOD problems since day one. I have tried everything I know to do and gotten nowhere. I'm running 7 Professional x64 retail, and this is the first install of it. My computer seems to give me a BSOD within a few minutes...
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 16:17.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App