Event ID 10 (0x80041003) - Random and frequent BSOD

Hi forum


im getting frequent BSOD errors on my home computer while im at work, i notice these as i access my home machine from logmein quite frequently, but they also occur when my system is on stand by.

I havnt been able to figure out what sets it off, but i get the following in the event viewer every time..


Event filter with query "SELECT * FROM __InstanceModificationEvent WITHIN 60 WHERE TargetInstance ISA "Win32_Processor" AND TargetInstance.LoadPercentage > 99" could not be reactivated in namespace "//./root/CIMV2" because of error 0x80041003. Events cannot be delivered through this filter until the problem is corrected.


When this happens, the computer does not simply reboot, it will either try to boot from an external drive -(despite it being removed from the boot device list in the BIOS)- or will sit on "please insert valid boot disk... yadda yadda..."


ive thrown memtext +86 at my system countless times without error, so im pretty sure its not my RAM


i also dont think that there is a problem with my primary (c:\) drives (2x250GB SSD, RAID0) so im pretty lost as to where to look next

this problem has stuck with me through multiple BIOS versions and even after several re-installations of windows, i still get it.

[system specs below]

all help is greatly appreciated!

thanks!



------------
Sys Specs
------------
OS: Windows 7 Ultimate x64
CPU: Intel® Core™ i7-2600 Processor (8M Cache, up to 3.80 GHz)
Motherboard: Asus P8Z68 Deluxe
Memory: 16GB 4x4GB Corsair Dominator 1600MHz, 9-9-9-24, 1.65V
Graphics Card: Nvidia GTX580
Display: Acer V203 20'
Hard Drives: 2 x A-RAM SSD Elite series 240GB 2.5" MLC SATA III SSD (Raid 0, OS Device)
2x Hitachi 2TB Ultrastar A7K3000 7200rpm Enterprise HDD (No Raid)
PSU: Corsair 750W
Case: DarkFleet DF-85

For the Event ID 10 error: Event ID 10 is logged in the Application log after you install Service Pack 1 for Windows 7 or Windows Server 2008 R2


The above is probably not the cause of your crashes and just a coincidence, but it is still a good step. To determine the actual cause, we will need you to please follow the http://www.sevenforums.com/crashes-debugging/96879-blue-screen-death-bsod-posting-instructions.html to provide us with your full crash reports.

Hey there,

thanks for the quick reply!

please find attched the requested files

Can you provide your manufacturer(s) and model(s) for your SSDs?

Is the SSD firmware up to date? If you do not know or you know it is not up to date, I would suggest updating it as your first priority.

Backup any important data prior to updating the firmware. You will need to remove the RAID configuration to do so and will likely have to re-install Windows.


RAID was really designed with servers in mind and not the home user: Why RAID is (usually) a Terrible Idea - Puget Custom Computers

Hi Writhziden

My SSDs are A-RAM SSD Elite series 240GB 2.5" MLC SATA III SSD

ill have to have a look at the Firmware version when i get home, but if i can see that they are running an old firmware ill update them

thanks

You're welcome. Let us know whether you needed to update the firmware, and we can proceed from there.