Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Excessive BSODing with volmgr.sys and other error messages

22 Jun 2012   #11
Ortizme

Windows 7 64 bit
 
 

I used the application you linked to earlier but it requires a purchase to download the drivers for me. BTW I just BSod'ed while checking my email and scanning for viruses using SUPERantispyware


My System SpecsSystem Spec
.
22 Jun 2012   #12
Ortizme

Windows 7 64 bit
 
 

Look, nothing is working and I appreciate the help but I think I have bigger problems.

Would buying a new hard drive and canning this one help? Just start over new.
My System SpecsSystem Spec
22 Jun 2012   #13
DocteurQui

Windows 7 Home Premium 64 bits
 
 

If you dont want to spend more time to fix it, you had better to try to format and reinstall Windows before buying a new hard drive. The problem seems to come from a driver, so a new hard drive will probably not be neccessary.

Best regards,
DocteurQui
My System SpecsSystem Spec
.

23 Jun 2012   #14
Ortizme

Windows 7 64 bit
 
 

Ok so more problems. I reinstalled windows because I think I had a virus, but now I'm blue screening with these errors

On Sun 6/24/2012 1:03:38 AM GMT your computer crashed
crash dump file: C:\Windows\Minidump\062312-36847-01.dmp
This was probably caused by the following module: ntoskrnl.exe (nt+0x71F00)
Bugcheck code: 0xF4 (0x3, 0xFFFFFA8005BE8B30, 0xFFFFFA8005BE8E10, 0xFFFFF80002D80240)
Error: CRITICAL_OBJECT_TERMINATION
file path: C:\Windows\system32\ntoskrnl.exe
product: Microsoft® Windows® Operating System
company: Microsoft Corporation
description: NT Kernel & System
Bug check description: This indicates that a process or thread crucial to system operation has unexpectedly exited or been terminated.
This appears to be a typical software driver bug and is not likely to be caused by a hardware problem.
The crash took place in the Windows kernel. Possibly this problem is caused by another driver which cannot be identified at this time.


On Sun 6/24/2012 1:03:38 AM GMT your computer crashed
crash dump file: C:\Windows\memory.dmp
This was probably caused by the following module: ntkrnlmp.exe (nt!KeBugCheckEx+0x0)
Bugcheck code: 0xF4 (0x3, 0xFFFFFA8005BE8B30, 0xFFFFFA8005BE8E10, 0xFFFFF80002D80240)
Error: CRITICAL_OBJECT_TERMINATION
Bug check description: This indicates that a process or thread crucial to system operation has unexpectedly exited or been terminated.
This appears to be a typical software driver bug and is not likely to be caused by a hardware problem.
The crash took place in the Windows kernel. Possibly this problem is caused by another driver which cannot be identified at this time.
My System SpecsSystem Spec
24 Jun 2012   #15
DocteurQui

Windows 7 Home Premium 64 bits
 
 

Hi,

Try a memtest and a CHKDSK.

Best regards,
DocteurQui
My System SpecsSystem Spec
25 Jun 2012   #16
writhziden

Windows 7 Home Premium 64 Bit
 
 

We know very little about your system or the crashes occurring on it. Please follow the http://www.sevenforums.com/crashes-d...tructions.html to provide us with more information and the actual .dmp files. 3rd party .dmp analysis tools are unreliable and often just tell us Windows is not working right. You would not be here if it were working right. We need the full crash reports to find out why it is not working right.
My System SpecsSystem Spec
25 Jun 2012   #17
Ortizme

Windows 7 64 bit
 
 

Quote   Quote: Originally Posted by writhziden View Post
We know very little about your system or the crashes occurring on it. Please follow the http://www.sevenforums.com/crashes-d...tructions.html to provide us with more information and the actual .dmp files. 3rd party .dmp analysis tools are unreliable and often just tell us Windows is not working right. You would not be here if it were working right. We need the full crash reports to find out why it is not working right.
I'm sorry but I did follow the instructions very clearly. I used JCgriff2's tools and posted the results. I'm not sure what else I need to do. I seem to be having different problems now though so I'm running the tools again. And will post the results
My System SpecsSystem Spec
25 Jun 2012   #18
writhziden

Windows 7 Home Premium 64 Bit
 
 

Ah, I do see you followed them initially. It is good to get an up to date version, though. In the meantime, I'll take a look at the older ones and give my analysis.

Analysis:

Problem Devices:
Code:
Realtek High Definition Audio	HDAUDIO\FUNC_01&VEN_10EC&DEV_0892&SUBSYS_1458A022&REV_1003\4&2979E09F&0&0201	This device is disabled.
Were you aware of the above? If so, please explain your reasoning so we can understand your troubleshooting steps.


You only have SuperAntiSpyware installed for security. That is not enough. I recommend either of these:
After installing your security software, update it, and then run full scans today with each program. Report back the results of the scans.


Problematic Software:
Code:
Start Menu\Programs\GIGABYTE\ET6	Public:Start Menu\Programs\GIGABYTE\ET6	Public
Start Menu\Programs\MSI Afterburner	Michael-PC\Michael:Start Menu\Programs\MSI Afterburner	Michael-PC\Michael
The above software provides software overclocking to the system. Software overclocking is not recommended because it does not set up the BIOS settings properly for the overclock to be stable. Please remove the two programs listed above.

Also, remove any fast charging software/devices from the system. They put the USB ports in an unnatural power state that can lead to crashes.


Your crashes point to backup software. If you have any 3rd party backup software, remove it to see if the system is then stable. If you do not have backup software, disable Windows Backup and reset your System Protection/System Restore setup:

Backup User and System Data Files - Enable or Disable

System Protection - Turn On or Off - Turn it off first. Apply the changes, hit OK, and restart the system. Then turn it back on.
My System SpecsSystem Spec
26 Jun 2012   #19
Ortizme

Windows 7 64 bit
 
 

Thank you for the help I'm running the programs again right now for an update. Since I first posted I have re-enabled the realtek driver and removed the ET6 and MSI afterburner.

I have a hunch though. Frequently my computer freezes up and I can't do anything and during that time I can't hear my hard drive. The performance monitor on my G19 records 0 cpu usage. Could my HDD be failing?
My System SpecsSystem Spec
26 Jun 2012   #20
Ortizme

Windows 7 64 bit
 
 

I forgot to mention that last night I was having boot trouble and got this screen a couple of times
My System SpecsSystem Spec
Reply

 Excessive BSODing with volmgr.sys and other error messages




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
BSOD after excessive chrome use?not sure error 0x0000003b
My laptop (HP Pavilion dv6 6153cl) went down a couple times now First time it happened: I had quite a few tabs on chrome open, and was using word doc while streaming a world cup game live. The screen suddenly went black, then nothing worked, so I had to force a shut down From then on, the...
BSOD Help and Support
BSOD volmgr.sys, error 0x000000C9
Hi all, Attached is the SF zipped folder. I have been experiencing BSODs. I am currently running on Windows 7 Professional, 32-bit. Any other relevant information I will be gladly able to provide, let me know. Kindly assist. Thank you all in advance.
BSOD Help and Support
How many error messages do you get each day?
I would find it interesting to see how many error messages show up in your event viewer, on average, each day. I can get a lot when I am installing/configuring new hardware or software, and most of my error messages get generated on each start-up. On average when things are running reasonably...
General Discussion
three error messages
Hi Guys, I'm a bit stumped, being to trying to find a solution on the net to no arrival. None of the inbuilt windows fixers have been very helpful. Error messages when updating are; - 80070570 - 570 - 80070130 Frustrating as this computer is only 2 weeks old.
Windows Updates & Activation
Installation Never Starts: Something about volmgr.sys
Hello! This may not be enough information to get help, unfortunately for me to get the complete error message I need to take apart this computer a bit and it's generally a bit of a hassle. I hope to get at least a hint of how to fix it with what I have before I do that. I have a fresh system....
Installation & Setup
MDT Volmgr.sys error with Win7 x32
I'm working on building a 32-bit Win7 image. For some reason it keeps giving us issues. We've been capturing it on a Win7 box, but once we move it to the server, it won't put the image down properly. (Note that the Win7 box used to capture doesn't have issues putting the image down, which is...
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd

All times are GMT -5. The time now is 18:39.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App