Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: BSOD Suddenly occurring after a few minutes even in safe mode

25 Jun 2012   #1
oreagan60

Windows 7 Ultimate x64
 
 
BSOD Suddenly occurring after a few minutes even in safe mode

Windows 7 Ultimate x64
Installed from DVD, full retail
Fairly new motherboard, just a month or so old - A75 Extreme6
Reinstalled Windows at that point, no problems until now.

Last night browsing the Internet it BSODed, then again right as Windows was starting, then again after a few minutes in Safe Mode with Networking. Suspecting RAM, I pulled one of the two sticks, but possibly my ability to post this is just coincidental to that. I'd really appreciate input. Perfmon says no antivirus, but I have MSI installed and running. The other possibly culprit seems to be LAN driver, but if I have the most recent driver from the motherboard's website already installed, what else can I do to fix it?

Edit: Attaching files


My System SpecsSystem Spec
.
25 Jun 2012   #2
oreagan60

Windows 7 Ultimate x64
 
 

Quote   Quote: Originally Posted by oreagan60 View Post
Windows 7 Ultimate x64
Installed from DVD, full retail
Fairly new motherboard, just a month or so old - A75 Extreme6
Reinstalled Windows at that point, no problems until now.

Last night browsing the Internet it BSODed, then again right as Windows was starting, then again after a few minutes in Safe Mode with Networking. Suspecting RAM, I pulled one of the two sticks, but possibly my ability to post this is just coincidental to that. I'd really appreciate input. Perfmon says no antivirus, but I have MSI installed and running. The other possibly culprit seems to be LAN driver, but if I have the most recent driver from the motherboard's website already installed, what else can I do to fix it?

Edit: Attaching files
The attachment didn't seem to work, trying again here.
My System SpecsSystem Spec
25 Jun 2012   #3
FredeGail

Microsoft Windows 7 Ultimate: x64 (SP1)
 
 

Hello and welcome to Sevenforums!

BSOD Report

Drivers to be aware of

Code:
cbfs3        EldoS Callback File Sy EldoS Callback File Sy Kernel        Manual     Running    OK         TRUE        FALSE        208,896    45,056     0      6/7/2012 1:18:31 AM    C:\Windows\system32\DRIVERS\cbfs3.sys
It's not so long ago you've installed this software actually. It points to a software called Callback, which is some sort of virtual filesystem. Eventhough the driverq_v says it's OK, your dump points errors at it. I recommend maybe another software like Callback, or you can contact their Costumer Service.

Code:
adpahci      adpahci                adpahci                Kernel        Manual     Stopped    OK         FALSE       FALSE        0          311,296    0      5/1/2007 10:30:09 AM   C:\Windows\system32\drivers\adpahci.sys          4,096   (Adaptec Ultra160 SCSI miniport driver)
(Adaptec Ultra160 SCSI miniport driver) Update this one here. Adaptec - Technical Support

Code:
8/6/2006 6:51:06 PM    C:\Windows\system32\drivers\BrFiltLo.sys
8/6/2006 6:51:02 PM    C:\Windows\system32\drivers\BrFiltUp.sys
8/6/2006 6:51:11 PM    C:\Windows\system32\Drivers\Brserid.sys
8/6/2006 6:51:05 PM    C:\Windows\system32\Drivers\BrSerWdm.sys
8/6/2006 6:51:00 PM    C:\Windows\system32\Drivers\BrUsbMdm.sys
8/9/2006 5:11:02 AM    C:\Windows\system32\Drivers\BrUsbSer.sys
Your Brother USB-driver-family tree, has a bunch of old drivers. Update them here.

Drivers, utilities and software updates for your Brother Product

Windows corrupted files

Your dumps wants to point the causes to the Windows Kernel, probably because it likely can't find the driver to point to.
We usually ask people to do this command to check if Windows is corrupted. It's the most common used one to check if the Windows files are corrupted. If it'll find errors, it'll restore them.
Tip   Tip
If you're having a custom customization layer on your Aero, it's likely to get restored to default.


Press Start | search 'cmd' | Right-click it
| open as Admin | type SFC /SCANNOW

SFC /SCANNOW Command - System File Checker

Memory

Code:
*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************

SYSTEM_SERVICE_EXCEPTION (3b)
An exception happened while executing a system service routine.
Arguments:
Arg1: 00000000c0000005, Exception code that caused the bugcheck
Arg2: fffff88000cf55df, Address of the instruction which caused the bugcheck
Arg3: fffff8800296a090, Address of the context record for the exception that caused the bugcheck
Arg4: 0000000000000000, zero.
You have had the 0x3b, which can indicate that no memory were left, or bad sticks. Download a copy of Memtest86+, and to 7-8 passes. Post back your results.

That'll cover it all for now.

Best Regards,
Frederik.
My System SpecsSystem Spec
.

25 Jun 2012   #4
oreagan60

Windows 7 Ultimate x64
 
 

Thanks for the quick response. In reverse order of your solutions:

-3 passes of memtest showed no errors. I'll run it for a full 7-8 overnight, but it doesn't seem as likely now.

-sfc /scannow showed no integrity problems

-Regarding the Brother drivers, I can't figure out what they could be related to. The Brother site you link wants to know my product group, yet I have no idea what products I use that could be Brother-related. Is there any way to access this information?

-Basically the same question for the 'Adaptec Ultra160 SCSI miniport' driver - I've already installed everything that's listed on the motherboard manufacturer's site, and the Adaptec page you link doesn't have any clear way of telling what driver I might get to update mine. Is there any internal way to figure out which driver specifically to try to find? For reference, I've installed everything here: ASRock > Products > Motherboard > A75 Extreme6 > Download

-I assume the Callback stuff is related to FlexRAID, a program that allows a software RAID setup within Windows. If the driver fixes don't work, I will certainly take up the issue with them.

Thanks for your help!
My System SpecsSystem Spec
26 Jun 2012   #5
FredeGail

Microsoft Windows 7 Ultimate: x64 (SP1)
 
 

Hello again oreagan,

The most important thing right now, is to get the Callback fixed. If you're familiar with the software, you should contact their support or uninstall their software if you so desire. The other drivers we'll take as a second step.

Good job!

Best Regards,
Frederik.
My System SpecsSystem Spec
Reply

 BSOD Suddenly occurring after a few minutes even in safe mode




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
My laptop takes 20 minutes to load, even in safe mode
My laptop takes over 20 minutes to load, even in safe mode. What can be done about that? The general performance of the computer is slow, and it wasn't like that when I brought it. I've tried defragmenting it, but it didn't do anything.
Performance & Maintenance
BSOD's suddenly occurring very frequently, errors 0x00000024, 4a, 1b
Hello, I am new to these forums and was hoping for some help regarding my rather extreme BSOD situation. I've had this PC from Chillblast for over 2 years now, and other than the occasional BSOD (think I've had 3/4 in those 2 years), which was usually rectified with a nVidia driver update, it...
BSOD Help and Support
BSoD 0xf4 after a few minutes, safe mode working
Hi, I have been experiencing BSOD the last 3 days for no apparent reason (no hardware or major software changes). The PC will boot into the desktop and seem to be working normally then within a few minutes the system will become unresponsive and give a BSOD 0xf4 CRITICAL_OBJECT_TERMINATION,...
BSOD Help and Support
BSOD every 10-15 minutes when turned on. In reg mode and safe mode.
So I am having trouble with my computer since last night it started to give me the blue screen of death every 10-15 minutes with all kinds of different reasons. I cleaned my pc, searched for viruses as much as I could, and I have restored to a different point in time twice. I have tried the...
BSOD Help and Support
Windows 7 laptop takes 20-25 minutes to shut down, even from Safe Mode
My laptop, a Dell which is about fifteen months old, takes way too long to shut down. I'm not sure when this started - it used to shut down just fine. Originally I thought it was getting stuck, and I held down the power button after 10 minutes of 'Shutting down...' but if I leave it for half an...
Performance & Maintenance
BSOD every 4 minutes when starting normally - currently on SAFE MODE
Hey there. I don't know what happened. One minute everything is all fine and dandy. The next I get flashing blue screen with scary warnings and 'crash debugging' countdown or count up! I started the computer in safe mode and deleted any software and anything I have been downloading recently. It...
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd

All times are GMT -5. The time now is 03:49.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App