Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: BSOD on freshly installed Windows 7

25 Jun 2012   #1
Reykor

Windows 7 Enterprise x64
 
 
BSOD on freshly installed Windows 7

Hello guys, I Installed Windows 7 Ultimate and I got a lot of BSODs so I decided to format and do a fresh install of Windows 7, this time enterprise but the BSODs
continue

System specs:
Windows 7 Enterprise x64
Full Retail
The hardware has 3 days.
Windows was installed yesterday

Hardware:
Motherboard: Gigabyte GA-Z68X-UD3H-B3
Graphics Card: Gigabyte Radeon HD 6870
Processor: Intel Core i5 2500k
Ram: Corsair Vengeance 8gb
PSU: Corsair 650W
Hard Drive: Barracuda 500GB

Please help me figure what what's wrong,
Thanks in advance


My System SpecsSystem Spec
.
26 Jun 2012   #2
writhziden

Windows 7 Home Premium 64 Bit
 
 

Crash points to memory problems or driver conflicts.
  • If you are overclocking any hardware, please stop.

  • Run the boot version of Memtest86+ paying close attention to Parts 2 and 3 of the tutorial. Also, in case Memtest86+ misses anything and comes up with no errors, run the extended version of the Windows Memory Diagnostics Tool for at least five passes. These you may want to run overnight since they take a long time to complete (run them an hour before bed each of the next two nights and check before going to sleep that they are still running).
    warning   Warning
    Before you proceed with the following, answer these two questions: Are you still under warranty? Does your warranty allow you to open up the machine to check hardware? If you are unsure of the answers to these questions, contact your system manufacturer. WARNING: The steps that follow can void your warranty!!!

    For Part 3: If You Have Errors: If you swap any memory components, follow these steps for ESD safety:
    1. Shut down and turn off your computer.
    2. Unplug all power supplies to the computer (AC Power then battery for laptops, AC power for desktops)
    3. Hold down the power button for 30 seconds to close the circuit and ensure all power drains from components.
    4. Make sure you are grounded by using proper grounding techniques, i.e. work on an anti-static workbench, anti-static desk, or an anti-static pad. Hold something metallic while touching it to the anti-static surface, or use an anti-static wristband to attach to the anti-static material while working. If you do not have an anti-static workbench, desk, or pad, you can use your computer tower/case by finding a metal hold in it, such as a drive bay.
    Once these steps have been followed, it is safe to remove and replace components within your computer.

  • An underlying driver may be incompatible\conflicting with your system. Run Driver Verifier to find any issues. To run Driver Verifier, do the following:
    a. Backup your system and user files
    b. Create a system restore point
    c. If you do not have a Windows 7 DVD, Create a system repair disc
    d. In Windows 7:
    • Click the Start Menu
    • Type verifier in Search programs and files (do not hit enter)
    • Right click verifier and click Run as administrator
    • Put a tick in Create custom settings (for code developers) and click next
    • Put a tick in Select individual settings from a full list and click next
    • Set up the individual settings as in the image and click next
      Attachment 218441
    • Put a tick in Select driver names from a list
    • Put a tick next to all non-Microsoft drivers.
    • Click Finish.
    • Restart your computer.

    If Windows cannot start in normal mode with driver verifier running, start in safe mode. If it cannot start in safe mode or normal mode, restore the system restore point using System Restore OPTION TWO.

    If you are unable to start Windows with all drivers being verified or if the blue screen crashes fail to create .dmp files, run them in groups of 5 or 10 until you find a group that causes blue screen crashes and stores the blue screen .dmp files.
    The idea with Verifier is to cause the system to crash, so do the things you normally do that cause crashes. After you have a few crashes, upload the crash reports for us to take a look and try to find patterns.

    When you are ready to disable Verifier: Start Menu -> All Programs -> Accessories -> Right click Command Prompt -> Run as administrator -> Type the following command and then Enter:
    verifier /reset
    -> Restart your computer.
My System SpecsSystem Spec
Reply

 BSOD on freshly installed Windows 7




Thread Tools




Similar help and support threads
Thread Forum
Freshly installed PC BSOD Win7 pro 64bit
We have a PC at my work that has been giving me problems since I started here about 4 months ago first the pc would power down replaced the battery backup, still powering down replaced the plug to the psu because it was loose. Still kept powering down heat sink to processor was not secured. Kept...
BSOD Help and Support
BSOD Bluescreen, freshly installed Win 7 with updates
Hi guys, Need all the help I can get. Bluescreen after restart. Please see attached zip for the SF diagnostic tool. Thank you very much!
BSOD Help and Support
BSOD on a brand new machine freshly installed windows 7
hey, bought a new machine as part of my new home studio, installed windows 7 all the hardware drivers which came with it, ran windows update and installed all the recommended packages, since the day after i keep getting around 2-3 bsod's a day and its been a week since. couldnt find any solution on...
BSOD Help and Support
frequent bsod crushes on freshly installed PC
Hi, i'm having a lot of BSOD crushes on industrial PC that runs on Windows 7 32 bit professional edition.Sometimes it happens right on start up, sometimes after 15 minutes of work, sometimes after few hours . sometimes it appears when i open IE window, sometimes when i run DVR web based client. I...
BSOD Help and Support
BSOD on freshly installed Windows, error 0x0000007a
Hi, Recently I started getting random BSOD's during PC use, like every 2 or 3 days, sometimes at PC shutdown. Today I reinstalled windows, installed all my apps, and got BSOD again. :( BSOD's happen randomly, never had them during gaming. I got latest nvidia drivers, and all latest windows...
BSOD Help and Support
BSOD freshly installed system
Hi guys, I?m desperate. I reinstalled windows 3 times because I couldn't figure out what is causing bsod...Here are the miunidumps...I don't know how to read them, Thank you so much
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 13:56.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App