Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: New build memory_management BSOD (0x0000001a)

28 Jun 2012   #11
IanCadman

Windows 7 Ultimate x64
 
 

Thanks for the help

Sorry I did mean Verifier and I followed those steps you posted

Verifier caused the gdrv.sys (i think it was) bsod immediately after I entered my password on the login screen.

I turned off verifier in safe mode to remove easy tune 6.

I turned verifier back on to confirm the gdrv.sys bsod had gone, which it had, so I then with verifier still on attempted to use a few programs (paint.net, Vs2010) ran world of warcraft and just used the pc generally for probably about 2 hours with no further bsod's

so unfortunately I don't have any more dmps from when verifier was running


My System SpecsSystem Spec
.
28 Jun 2012   #12
writhziden

Windows 7 Home Premium 64 Bit
 
 

That's fine. You should disable Verifier for the time being. EasyTune6 can cause instability, so removing it was a good step. See if the system is now stable with the software removed and with Verifier disabled.
My System SpecsSystem Spec
28 Jun 2012   #13
IanCadman

Windows 7 Ultimate x64
 
 

Thanks for all you help writhziden,

The system is stable for practically 99% of the time other than the first boot in the morning which is the only time it bsod's

I'm beginning to think this is something i'm going to have to live with for the time being since it is impossible to get consistent bsod's

this motherboard/Ram/Cpu combination was just intended as a start package to keep the initial PC cheap but usable and will be getting replaced soon hopefully with faster parts
My System SpecsSystem Spec
.

28 Jun 2012   #14
writhziden

Windows 7 Home Premium 64 Bit
 
 

Let us know if you get another crash in the morning.

Also, if you do, try applying more support to the RAM by upping the voltage and changing the command rate to 2/2T/2N (depends on the BIOS settings whether you have the 2 followed by the T or N). I am currently downloading your motherboard manual to give more accurate steps...

BIOS Setting changes:
Bump the VTT Voltage to 1.2 V (or as close as you can get).

Change the Command Rate to 2
My System SpecsSystem Spec
28 Jun 2012   #15
IanCadman

Windows 7 Ultimate x64
 
 

Should I change the bios settings for tonight so that I can test it in the morning?

Since this morning (after all the verifier testing last night) I still got the bsod
My System SpecsSystem Spec
28 Jun 2012   #16
writhziden

Windows 7 Home Premium 64 Bit
 
 

I would recommend waiting until tomorrow to change settings if you have another crash.

This mornings may have been a false positive due to Verifier being enabled. What did the crash point to? Do you have a .dmp for it?
My System SpecsSystem Spec
28 Jun 2012   #17
IanCadman

Windows 7 Ultimate x64
 
 

I disabled verifier last night so this mornings was an "as normal" boot

I didn't have much time this morning but the bsod was really vague I will have a check if it created a dmp when I get home although I doubt it did since the bsod did not mention the usual "dumping physical memory to disk"
My System SpecsSystem Spec
28 Jun 2012   #18
Layback Bear

Windows 7 Pro. 64/SP-1
 
 

Sorry if I missed it. Check your motherboard specs and make sure you have the 2 sticks of ram in the proper slots.
My System SpecsSystem Spec
28 Jun 2012   #19
IanCadman

Windows 7 Ultimate x64
 
 

Hi Layback Bear,

Thanks for the help, the motherboard I have only has 2 slots so thankfully I can't get it wrong
My System SpecsSystem Spec
28 Jun 2012   #20
writhziden

Windows 7 Home Premium 64 Bit
 
 

Alright, if the crash this morning was a normal crash with Verifier disabled, then make the BIOS changes tonight and see if the system still crashes tomorrow morning.
My System SpecsSystem Spec
Reply

 New build memory_management BSOD (0x0000001a)




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
BSOD (MEMORY_MANAGEMENT, 0x0000001a)
Hey, since 2 days ago I'm getting BSOD's at seemingly random intervals. I've provided an SF Dump in the attachments, and here's the error; Problem signature: Problem Event Name: BlueScreen OS Version: 6.1.7601.2.1.0.256.1 Locale ID: 1043 Additional information about the problem: ...
BSOD Help and Support
BSOD Memory_Management 0x0000001A
Hi all, I've been experiencing numerous BSOD on a new build Zotac ID90 running Windows 7. The BSOD message is always "MEMORY_MANAGEMENT" leading me to suspect that this may be an indication of faulty RAM. I'm about to run a series of memtest86+ tests but wondered if anyone can spot anything else...
BSOD Help and Support
BSOD every single day : memory_management STOP :0x0000001A
When I'm browsing internet or playing games boom BSOD it happens diffrent times and I don't know what causes it! Once i didn't start anygame browsed internet and then after 7 hours i got a BSOD ( i was browsing with internet explore ) I play league of legends 2 hours *boom* BSOD I'm stuck with...
BSOD Help and Support
BSOD MEMORY_MANAGEMENT ntoskrnl.exe 0x0000001a
This is unbearable. Win7-64b Had constant mem management bsods when putting together a new system, ran verifier and mem test for going on 13hrs and both came up fine. Replaced the motherboard and still had the same errors, thought it might be a corrupt install so clean installed win7...
BSOD Help and Support
BSOD: MEMORY_MANAGEMENT Happens every day 0x0000001a
This has been happening ever since I built my computer. I tried memtest86, but it said I had 400,000 errors, and it was checking my CPU for some reason. I'm running Windows 7 on a 64bit computer. It isn't even a month old yet, I had to install the OS, full retail. I appreciate any help I can...
BSOD Help and Support
BSOD Memory_Management Stop: 0x0000001a
Hi, I have a VOSTRO 1500 upgraded from Windows XP to Windows 7 However, after the upgrade i've been getting the bluescreen attached. Please advise? anyone..? Thanks!
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 03:30.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App