Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Windows not loading after log in

28 Jun 2012   #1
TyComp1

Windows 7 home premium 64 bit OS
 
 
Windows not loading after log in

Currently running in safe mode. Troubleshooting says SuperFetch not running. Tried various solutions found here but to no avail. Vista was replaced with Windows 7 about 6 months ago. Worked fine until last night after installing new wireless router and trying reload wireless printer. Unable to attach performance monitor report but BSOD files are attached.

Thanks for your help.


My System SpecsSystem Spec
28 Jun 2012   #2
writhziden

Windows 7 Home Premium 64 Bit
 
 

Age of System:
Code:
BIOS Version/Date	Dell Inc. A16, 10/16/2008
Due to the age of your hardware, I would suggest checking that it is compatible with Windows 7: Windows 7 Compatibility: Software Programs & Hardware Devices: Find Updates, Drivers, & Downloads -> Download and run the Windows 7 Upgrade Advisor.

Also, make sure all Windows Updates are installed. I see Service Pack 1 is not installed yet.

Device Concerns:
Code:
avast! Network Shield Support	ROOT\LEGACY_ASWTDI\0000	This device is not present, is not working properly, or does not have all its drivers installed.
Security Processor Loader Driver	ROOT\LEGACY_SPLDR\0000	This device is not present, is not working properly, or does not have all its drivers installed.
The above are likely a result of being in Safe Mode.

Software Concerns:
Code:
Start Menu\Programs\Smart PC Cleaner	Public:Start Menu\Programs\Smart PC Cleaner	Public
  • Many of us on the forums actually do not recommend automated optimization tools for Windows 7. Windows 7 does a much better job of handling its own optimization than its predecessors did. We especially do not recommend registry cleaning as an "optimization" step because automated registry cleaning causes more harm to the registry than it actually repairs.

    In the future, if you need help optimizing Windows 7, please post a thread in Performance & Maintenance - Windows 7 Forums or follow the tutorial enclosed in that forum to Optimize Windows 7.

Analysis
Your BugChecks are all the same and indicate a corrupted Windows installation. You may be able to salvage it, but I have doubts. Still, we should try.
  • Check Windows for corruption. Run SFC /SCANNOW Command - System File Checker up to three times to fix all errors with a restart in between each. Post back if it continues to show errors after a fourth run or if the first run comes back with no integrity violations. Use OPTION THREE of SFC /SCANNOW Command - System File Checker to provide us with the sfcdetails.txt file if errors occur.

  • I suspect the problem is due to the Smart PC Cleaner software damaging the Windows installation and programs installed on Windows. However, it could be hard disk related.

    Run Disk Check with both boxes checked for all HDDs and with Automatically fix file system errors checked for all SSDs. Post back your logs for the checks after finding them using Check Disk (chkdsk) - Read Event Viewer Log (you may need to search for wininit instead of chkdsk).
    For any drives that do not give the message:
    Windows has checked the file system and found no problems
    run disk check again as above. In other words, if it says:
    Windows has made corrections to the file system
    after running the disk check, run the disk check again.

  • Run all Basic tests with SeaTools: S.M.A.R.T. Check, Short Drive Self Test, Drive Information, Short Generic, and Long Generic. Run the tests for all HDDs.
    SeaTools for Windows

    SeaTools for DOS

Smart PC Cleaner:
This appears to be a rogue antivirus/anti-malware/antispyware program that causes severe security vulnerabilities. I strongly urge you to start a thread regarding it in System Security | SevenForums
My System SpecsSystem Spec
26 Jul 2012   #3
TyComp1

Windows 7 home premium 64 bit OS
 
 

After multiple attempts at using scannow from windows and command prompt, it never got past number 39. Gave up and did a clean install of Windows 7. I then went through all my diagnostics. Found out that there was a hard drive problem that Seatools couldn't repair. Good news is the drive was still under warranty. Just received and installed refurbished drive and so far so good.
My System SpecsSystem Spec
Reply

 Windows not loading after log in




Thread Tools





Similar help and support threads
Thread Forum
Windows 7, windows is loading files and startup repair error
Alright so I'm getting these errors, first when I turn on my laptop, I get the windows is loading files before it just use to freeze there. Now it goes to Startup Repair and after the scan is done it says "Startup Repair cannot repair this computer autmatically, it gives me two options send...
Performance & Maintenance
Windows 8.1 first cold boot always BSOD at windows loading screen
Hi, Please help. I am at wits end. I have tried with a new harddisk, took out my graphics card, checked my memory, they all seemed fine. My computer always run into a quick BSOD during the first boot and I am unable to see the error message and it restarts back to BIOS followed by a successful...
BSOD Help and Support
Loading hang after "window's loading" and the login screen
hello, my pc started doing that : at booting, just after the "window's starting" animation and before the login screen, i see the mouse cursor and it last for about 20sec like that. I made sure it's not video drivers. I didn't install any programs. I checked start list and it look normal. Appart...
General Discussion
Client's Windows Laptop stay on Windows loading screen
I have a client coming over to drop his Laptop and he explained to me his problem. Whenever he powers up his laptop , The windows screen loads and stays stuck. No blue screen of death occurs . I was just wondering before I receive it, what do you guys think the problem can be?
General Discussion
Windows not Loading after update, hangs on "Loading operating system."
During a recent windows update my pc froze, (mid-update) and I restarted my machine. Now windows gets stuck at the black" Loading operating system..."screen. After a long wait it will eventually display .........boot from cd/. When I boot from my windows dvd my os is not shown in system recovery....
General Discussion
Windows 7-Setup hangs after windows is loading files with black screen
I'm new here.I couldnt find any solution for my problem anywhere and i thought i can find it here. I have Windows 7 Ultimate 32 Bit and im trying to install it for about 6 months. I installed it once but after one week,os is gone and stuck at classpnp.sys Here are the steps i followed...
Installation & Setup

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 04:01.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App