Device Concerns:
Code:
NVIDIA High Definition Audio HDAUDIO\FUNC_01&VEN_10DE&DEV_0016&SUBSYS_10DE0101&REV_1001\5&37CB11FF&0&0001 This device is disabled.
NVIDIA High Definition Audio HDAUDIO\FUNC_01&VEN_10DE&DEV_0016&SUBSYS_10DE0101&REV_1001\5&37CB11FF&0&0101 This device is disabled.
VirtualBox Host-Only Ethernet Adapter ROOT\NET\0000 This device is disabled.
ASUS Bluetooth USB\VID_0B05&PID_179C\6&DF2EE03&0&7 This device is disabled.
NVIDIA High Definition Audio HDAUDIO\FUNC_01&VEN_10DE&DEV_0016&SUBSYS_10DE0101&REV_1001\5&37CB11FF&0&0201 This device is disabled.
NVIDIA High Definition Audio HDAUDIO\FUNC_01&VEN_10DE&DEV_0016&SUBSYS_10DE0101&REV_1001\5&37CB11FF&0&0301 This device is disabled.
Realtek 8185 Extensible 802.11b/g Wireless Device PCI\VEN_10EC&DEV_8185&SUBSYS_822510EC&REV_20\5&D93DF5B&0&0800E6 This device is disabled.
Were you aware of the above? If so, please explain your reasoning so we may understand your troubleshooting steps.
Software Concerns:
You need to update to Kaspersky Internet Security 2012. 2011 may cause instability due to the age of the software.
You have a number of programs running. I would recommend that you
Troubleshoot Application Conflicts by Performing a Clean Startup leaving only your security software enabled with startup and have services run on startup.
Code:
Start Menu\Programs\ASUS\AI Suite II Public:Start Menu\Programs\ASUS\AI Suite II Public
Start Menu\Programs\ASUS\Disk Unlocker Public:Start Menu\Programs\ASUS\Disk Unlocker Public
Start Menu\Programs\Driver Detective Public:Start Menu\Programs\Driver Detective Public
- Recommend removing your ASUS utilities through Start Menu -> Control Panel -> Uninstall a program. They can provide software interfaces with the hardware for overclocking, and even when the overclock is not enabled, that interface can cause instability. They are also not needed for the system to function properly and may reduce system resources.
- We do not recommend automated driver update software. It often finds drivers for devices similar to but not exactly the same as the hardware actually on the system. This can lead to conflicts and blue screen crashes. If you need help finding driver updates for a certain device, please start a thread in Drivers - Windows 7 Forums instead of using software. Driver updates are not always necessary and some updates can actually decrease system stability rather than increase it, so it is usually better not to update unless a device or its driver is causing problems with the system. If it ain't broke, don't fix it.
Analysis:
It is difficult to find patterns with only one .dmp file. Yours points to memory problems or driver conflicts.
- If you are overclocking any hardware, please stop.
- Run the boot version of Memtest86+ paying close attention to Parts 2 and 3 of the tutorial. Also, in case Memtest86+ misses anything and comes up with no errors, run the extended version of the Windows Memory Diagnostics Tool for at least five passes. These you may want to run overnight since they take a long time to complete (run them an hour before bed each of the next two nights and check before going to sleep that they are still running).
Warning
Before you proceed with the following, answer these two questions:
Are you still under warranty? Does your warranty allow you to open up the machine to check hardware? If you are unsure of the answers to these questions,
contact your system manufacturer. WARNING: The steps that follow can void your warranty!!!
For Part 3: If You Have Errors: If you swap any memory components, follow these steps for ESD safety:
- Shut down and turn off your computer.
- Unplug all power supplies to the computer (AC Power then battery for laptops, AC power for desktops)
- Hold down the power button for 30 seconds to close the circuit and ensure all power drains from components.
- Make sure you are grounded by using proper grounding techniques, i.e. work on an anti-static workbench, anti-static desk, or an anti-static pad. Hold something metallic while touching it to the anti-static surface, or use an anti-static wristband to attach to the anti-static material while working. If you do not have an anti-static workbench, desk, or pad, you can use your computer tower/case by finding a metal hold in it, such as a drive bay.
Once these steps have been followed, it is safe to remove and replace components within your computer.
- An underlying driver may be incompatible\conflicting with your system. Run Driver Verifier to find any issues. To run Driver Verifier, do the following:
a.
Backup your system and user files
b.
Create a system restore point
c. If you do not have a Windows 7 DVD,
Create a system repair disc
d. In Windows 7:
- Click the Start Menu
- Type verifier in Search programs and files (do not hit enter)
- Right click verifier and click Run as administrator
- Put a tick in Create custom settings (for code developers) and click next
- Put a tick in Select individual settings from a full list and click next
- Set up the individual settings as in the image and click next
Attachment 218940 - Put a tick in Select driver names from a list
- Put a tick next to all non-Microsoft drivers.
- Click Finish.
- Restart your computer.
If Windows cannot start in normal mode with driver verifier running, start in safe mode. If it cannot start in safe mode or normal mode, restore the system restore point using
System Restore OPTION TWO.
If you are unable to start Windows with all drivers being verified or if the blue screen crashes fail to create .dmp files, run them in groups of 5 or 10 until you find a group that causes blue screen crashes and stores the blue screen .dmp files.
The idea with Verifier is to cause the system to crash, so do the things you normally do that cause crashes. After you have a few crashes, upload the crash reports for us to take a look and try to find patterns.
When you are ready to disable Verifier: Start Menu -> All Programs -> Accessories -> Right click Command Prompt -> Run as administrator -> Type the following command and then Enter: verifier /reset
-> Restart your computer.
USB Wireless Network Adapter:
It appears you have a USB Wireless Network Adapter. The drivers for it are old and pre-Windows 7. I would advise replacing it with a wireless PCI card that is Windows 7 ready. USB ports do not provide the power necessary for USB wireless network devices to run stable. Couple that with an old driver, and you have a recipe for crashes.