Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: BSOD while watching youtube/gaming


29 Jun 2012   #1

Windows 7 Ultimate x64
 
 
BSOD while watching youtube/gaming

Currently:
Windows 7 Ultimate x64
Not the original OS of the system
Full Retail
Age of the computer is about 8 months
Age of current installation (at the time of posting) is about 7 hours.


Hello there I have been getting BSOD for about 5 days or so.
I had Windows 7 x64 professional on the computer.

Today I did a "ultra clean install" to Windows 7 x64 Ultimate
I did a DISKPART -> clean all then installed this version of windows hoping that my problem would have been fixed. I have receice about 3 or 4 BSOD's since this installation.

All my drivers seem to be up to date (manually checked all drivers from device manager).

All help is greatly appreciated.
Thank You.

I hope I successfully attached the zip file as instructed by the site.


My System SpecsSystem Spec
.

29 Jun 2012   #2

Windows 7 Ultimate x64
 
 

I have also received numerous "has stopped working messages" including windows explorer before and after installing the current OS.
My System SpecsSystem Spec
29 Jun 2012   #3

Windows 7 Ultimate x64
 
 

New info:

The computer has been on for about 1 hour since I made this post and now the message Windows Explorer ahs stopped working comes up when I try to search for programs and files or by trying to click on Windows Update among other things.
My System SpecsSystem Spec
.


30 Jun 2012   #4

Windows 7 Home Premium 64 Bit
 
 

Analysis:
You had three different BugCheck codes. They may be due to AVG since it shows up in one. Two of them indicate memory problems. I suspect this is hardware, and probably memory related. Run some hardware checks.
  • If you are overclocking any hardware, please stop.

  • If you have an SSD, make sure the following are up to date:
    • SSD firmware
    • BIOS Version
    • Chipset Drivers
    • Hard disk controller drivers/SATA drivers
    • If you have a Marvell IDE ATA/ATAPI device, make sure the drivers are up to date from the Intel site or Marvell site and not from your motherboard/vendor support site.

  • Run all but the advanced tests with SeaTools for HDDs.
    SeaTools for Windows

    SeaTools for DOS
  • Monitor temperatures during the following tests.
    Use the following programs to monitor the temperatures.
  • Run the boot version of Memtest86+ paying close attention to Parts 2 and 3 of the tutorial. Also, in case Memtest86+ misses anything and comes up with no errors, run the extended version of the Windows Memory Diagnostics Tool for at least five passes. These you may want to run overnight since they take a long time to complete (run them an hour before bed each of the next two nights and check before going to sleep that they are still running).

    warning   Warning
    Before you proceed with the following, answer these two questions: Are you still under warranty? Does your warranty allow you to open up the machine to check hardware? If you are unsure of the answers to these questions, contact your system manufacturer. WARNING: The steps that follow can void your warranty!!!


    For Part 3: If You Have Errors: If you swap any memory components, follow these steps for ESD safety:
    1. Shut down and turn off your computer.
    2. Unplug all power supplies to the computer (AC Power then battery for laptops, AC power for desktops)
    3. Hold down the power button for 30 seconds to close the circuit and ensure all power drains from components.
    4. Make sure you are grounded by using proper grounding techniques, i.e. work on an anti-static workbench, anti-static desk, or an anti-static pad. Hold something metallic while touching it to the anti-static surface, or use an anti-static wristband to attach to the anti-static material while working. If you do not have an anti-static workbench, desk, or pad, you can use your computer tower/case by finding a metal hold in it, such as a drive bay.
    Once these steps have been followed, it is safe to remove and replace components within your computer.

  • We should check RAM compatibility:
    Download and install CPU-Z and Upload screenshots of the CPU, Mainboard, Memory, and SPD tabs. In the SPD tab, upload an image of each slot.
My System SpecsSystem Spec
Reply

 BSOD while watching youtube/gaming




Thread Tools



Similar help and support threads for2: BSOD while watching youtube/gaming
Thread Forum
Got BSOD while watching youtube BSOD Help and Support
BSOD while watching youtube. BSOD Help and Support
BSOD while watching youtube BSOD Help and Support
BSOD while watching youtube BSOD Help and Support
BSOD watching youtube atikmpag.sys BSOD Help and Support
BSOD Whilst Watching Youtube Video, After Watching Tumblr Video. BSOD Help and Support
Solved BSoD when watching YouTube BSOD Help and Support

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 01:38 AM.
Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App
  

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33