Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Repeats daily BSODs

01 Jul 2012   #1
namvu9x

Window 7 professional x64
 
 
Repeats daily BSODs

I play a few online games like Nurien Mstar and i've been getting a lot of bsods.
My computer began to get bsod since the day i installed window xp x32 to my computer also, so i had 2 operating systems, and i thought that was the problem but it wasn't. I still get BSOD.

Is Windows 7 . . . - 64 - Is not the original installed OS on the system - Not sure, i got the files and keys from my university - What is the age of system (hardware)? maybe 3 years? - What is the age of OS installation (have you re-installed the OS?) 2 months ago?


My System SpecsSystem Spec
.
01 Jul 2012   #2
writhziden

Windows 7 Home Premium 64 Bit
 
 

Device Concerns:
Code:
Realtek PCIe GBE Family Controller	PCI\VEN_10EC&DEV_8168&SUBSYS_83A31043&REV_03\4&200EBFD3&0&0030	This device is disabled.
DroidCam Virtual Audio	ROOT\MEDIA\0000	52
Were you aware of the above? If so, please provide an explanation so we may understand your troubleshooting steps.

Analysis:
BugCheck 0x124
You have a 0x124 hardware bugcheck. If the system is still under warranty, I would recommend sending it in to have diagnostic tests done and any bad hardware replaced.

warning   Warning
Before you proceed with the following, answer these two questions: Are you still under warranty? Does your warranty allow you to open up the machine to check hardware? If you are unsure of the answers to these questions, contact your system manufacturer. WARNING: The steps that follow can void your warranty!!!

For your hardware stop 0x124 crash, read through Stop 0x124 - what it means and what to try and use the following hardware checks to supplement that link.
  • If you are overclocking any hardware, please stop.

  • If you have an SSD, make sure the following are up to date:
    • SSD firmware
    • BIOS Version
    • Chipset Drivers
    • Hard disk controller drivers/SATA drivers
    • If you have a Marvell IDE ATA/ATAPI device, make sure the drivers are up to date from the Intel site or Marvell site and not from your motherboard/vendor support site.

  • Run all but the advanced tests with SeaTools for HDDs.
    SeaTools for Windows

    SeaTools for DOS
  • Monitor temperatures during the following tests.
    Use the following programs to monitor the temperatures.
  • Run the boot version of Memtest86+ paying close attention to Parts 2 and 3 of the tutorial. Also, in case Memtest86+ misses anything and comes up with no errors, run the extended version of the Windows Memory Diagnostics Tool for at least five passes. These you may want to run overnight since they take a long time to complete (run them an hour before bed each of the next two nights and check before going to sleep that they are still running).

    For Part 3: If You Have Errors: If you swap any memory components, follow these steps for ESD safety:
    1. Shut down and turn off your computer.
    2. Unplug all power supplies to the computer (AC Power then battery for laptops, AC power for desktops)
    3. Hold down the power button for 30 seconds to close the circuit and ensure all power drains from components.
    4. Make sure you are grounded by using proper grounding techniques, i.e. work on an anti-static workbench, anti-static desk, or an anti-static pad. Hold something metallic while touching it to the anti-static surface, or use an anti-static wristband to attach to the anti-static material while working. If you do not have an anti-static workbench, desk, or pad, you can use your computer tower/case by finding a metal hold in it, such as a drive bay.
    Once these steps have been followed, it is safe to remove and replace components within your computer.

Remember to read closely through Stop 0x124 - what it means and what to try for the crash.
My System SpecsSystem Spec
08 Jul 2012   #3
namvu9x

Window 7 professional x64
 
 

I disabled realtek ethernet so I can use my phone as an internet modem n the droidcam audio I never used.my computer was a custom built 3 years ago so could u please tell me what should I take back for waranty.
My System SpecsSystem Spec
.

09 Jul 2012   #4
writhziden

Windows 7 Home Premium 64 Bit
 
 

Probably nothing that is still under warranty except possibly the RAM. We need to narrow down what hardware is causing issues, though. Sending hardware back without knowing what to replace will not help your resolve the problem. Please proceed through the testing steps.

As long as you are careful with removing and replacing components/RAM in your system, you will not void the warranty. If the process seems too intimidating, try to find someone who is more comfortable running the tests for you and who will also teach you.
My System SpecsSystem Spec
Reply

 Repeats daily BSODs




Thread Tools




Similar help and support threads
Thread Forum
Daily BSODs, Need Help
Okay, my first post here guys so hang with me. I have had many BSODS in the past week on my computer. I have had windows 7 ult 64bit on it for about 2 months now. My last format of this drive was 32 bit vista. It also had Bsods. But with having no BSODS for about 2 months i thought the problem had...
BSOD Help and Support
Daily BSODs
Hello, Been experiencing BSOD. Problem first presented itself after using my computer with my Onkyo receiver with a mini HDMI to HDMI cable to stream Youtube videos on my HDTV. I read that the EVGA 400 series cards are not user friendly with win 7 with regard to the audio parts of the Nvidia...
BSOD Help and Support
Multiple Different BSODs Daily
Hi, Very recently my computer began to get daily BSODs. What is weird is that every time a different part is wrong-sometimes video drivers, sometime memory, etc. I'm wondering if someone could take a look at it and see if it's a software or hardware-related problem. Attached is the required...
BSOD Help and Support
New Build - Daily BSODs
:cry: Desperate for help; I've attached the zip file per your BSOD instructions. I also included an ntbtlog.txt that I was able to create in Safe mode today. Here is what's happening: I have a new build that crashes daily during Windows startup. I've reinstalled multiple times with the same...
BSOD Help and Support
Daily BSODs
Hey guys, I'm running a fresh install of Windows 7; used to have Vista, on my HP Pavilion have had it for a good 2 years,, and the BSODs have only started around 2 weeks after installing Windows 7. Basically my brother came home one day.. and somehow he managed to get a BSOD, now it's a recurring...
BSOD Help and Support
Crashing -> BSODs daily
Hello, I have Windows 7 Ultimate, and i am sick of getting BSODs. I ran prime95, memtest but it never crashed during the tests. I attached my last 3 generated minidumps. I tried to read them but i am getting the same error: -- Probably caused by : ntkrnlpa.exe ( nt+44022 ) Followup:...
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 16:08.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App