Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Multiple errors with BSOD

02 Jul 2012   #11
writhziden

Windows 7 Home Premium 64 Bit
 
 

Looks good so far. Continue with the other tests.

Also, make sure to read the information Karl gave for getting your Minidump .dmps set up properly.


My System SpecsSystem Spec
.
02 Jul 2012   #12
NEPALII

MS Windows 7 Home Premium 64-bit SP1
 
 

I have ran SFC /SCANNOW Command - System File Checker 3 times and Windows found corrupt files and didn't fix them. How do I fix them? Do I need a Windows 7 DVD or is there another way? Here is the txt.
My System SpecsSystem Spec
02 Jul 2012   #13
karlsnooks

MS Windows 7 Ultimate SP1 64-bit
 
 

NepalII,

You are looking at a repair install.

Repair Install
My System SpecsSystem Spec
.

02 Jul 2012   #14
NEPALII

MS Windows 7 Home Premium 64-bit SP1
 
 

I have done the mindump steps. Will do the repair install now. Anti virus showed no virus whatsoever.
My System SpecsSystem Spec
02 Jul 2012   #15
NEPALII

MS Windows 7 Home Premium 64-bit SP1
 
 

Done the repair install. Every step. Did windows updates, disk cleanup, windows refresh rate, etc... Turned PC back on after a few hours and blue screen again. No code. It said to check for hard disk corruption, hardware problems, etc.... I turn it off and on again, I get startup repair. No fixes were made, and I had to turn PC off and on again. I don't know what to do.
My System SpecsSystem Spec
02 Jul 2012   #16
writhziden

Windows 7 Home Premium 64 Bit
 
 

RAM Compatibility:

We should check your RAM compatibility: Download and install CPU-Z and Upload screenshots of the CPU, Mainboard, Memory, and SPD tabs. In the SPD tab, upload an image of each slot.
My System SpecsSystem Spec
02 Jul 2012   #17
NEPALII

MS Windows 7 Home Premium 64-bit SP1
 
 

I get an error when opening CPU-Z. I have attached the .log file. The program doesn't provide any info on some of the tabs, probably due to the error.

I appreciate all the help, thank you! If no other options are available, it looks like I have no solution other than sending the PC for repair.
My System SpecsSystem Spec
03 Jul 2012   #18
writhziden

Windows 7 Home Premium 64 Bit
 
 

You need to run CPU-Z in elevated mode. Right click the CPU-Z shortcut, select Run as administrator.
My System SpecsSystem Spec
03 Jul 2012   #19
karlsnooks

MS Windows 7 Ultimate SP1 64-bit
 
 

NepalII

Fluff out those System Specs for us please. Here is how (I recommend using Speccy which will provide some of the missing info that I seek)

Update your SevenForums System Specs
User CP (located on the top menu bar) |
Your Profile | Edit System Spec
(left-hand column)

To gather info, use Speccy (my favorite) or SIW or System Info

In the System Manufacturer Block, enter:
Manufacturer and Model and
ADD the word laptop, desktop, netbook or tablet.
For example:
Toshiba Satellite L305D notebook.

Provide full windows version info, for example:
MS Windows 7 Ultimate SP1 64-bit

Use the “Other Info” block for Optical Reader,
Mouse, touchpad, wifi adapter, speakers, monitor, etc

Scroll down and click on SAVE CHANGES.

You will find that in Speccy, you can select info from the display
using your mouse/touchpad and then paste that info into your specs.

SIW is a marvelous program, but the free version does not offer
this capability.
My System SpecsSystem Spec
03 Jul 2012   #20
NEPALII

MS Windows 7 Home Premium 64-bit SP1
 
 

I have opened CPU Z as admin and it worked. The screenshots are here attached. I'll now do the system specs.

Despite still getting blue screen, after doing repair install, my PC now installed all the Windows updates without problems and the PC isn't losing the Wi Fi connection to my router. It seems to be fixed, these two issues. But, I didn't have them in first place and then they appeared, so it's better to get rid of the blue screen, if possible.
My System SpecsSystem Spec
Reply

 Multiple errors with BSOD




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
BSOD Multiple times multiple errors 0x0000001A
Last week I started receiving BSODs, and after the first one it got to the point where my computer was not booting up and my hard drive was beeping very angrily at me. I was not sure what all the problems were, however I also knew that there was something seriously wrong with my hard drive, so I...
BSOD Help and Support
Multiple BSOD's with multiple errors occuring randomly
Just realized I uploaded the wrong zip folder, It doesn't have everything in it. Fixed that now though! Sorry about the hassle! So I built my own PC a a good few months back, and within a month I experienced a BSOD, and now they are very frequent. They can happen three or four times a day, or...
BSOD Help and Support
Multiple BSOD errors
I was hoping that someone here could help me with this computer. I am getting random BSOD errors such as: 0xd1, 0x0a, 0x1e, and 0x50. So far I have installed a graphics card since she was using onboard graphics, reinstalled the OS, updated drivers, ran chkdsk which found no errors, ran sfc/scannow...
BSOD Help and Support
BSOD errors. multiple times during multiple programs
windows 7 x64 - original install on system but i don't have my disks. they are somewhere... - full retail version installed - age of the system is approximately 3 years - age of the install is approximately 2 years it seems to happen at random but i get BSODs. approximately 2-3 times a day...
BSOD Help and Support
Multiple BSOD, Multiple STOP errors
I hope someone can help. I have been recieving many random (to me) BSOD's. The (Two month old) laptop gets so many that it cannot be booted into any Windows mode (including safe mode). My only option is to restore the PC using HP's F11 (factory restore). I have managed to capture two .dmp...
BSOD Help and Support
BSOD - multiple Errors
The last two were just today were: Bad_Pool_Header Page_Fault_in_Nonpaged_area attached are analysis results:
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd

All times are GMT -5. The time now is 07:02.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App