Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: BSOD after uninstalling Norton features. I cant get window to load


01 Jul 2012   #1

64 windows pro
 
 
BSOD after uninstalling Norton features. I cant get window to load

I have a BSOD error STOP: 0x0000007E (0xFFFFFFFFC0000005, 0xFFFFF88004C2F013, 0xFFFFF880033FD2A8, 0xFFFFF880033FCB00) Original Vista Business, Installed Windows 7 Pro 64. November 2011. I cannot get windows to load, I checked for memory errors, hard drive errors through CMP. nothing works. I tried all safe mode categories, launch startup Repair about 20x. I have windows in D:. (the disk error shows 1 root causes). I tried system restore, and i get: The instruction at 0xfb8e584d referenced memory at 0x00000008. The memory could not be read.

The only thing I can think of is that the system recovery is running from C: instead of D:. is there a way to change that through CMP? Please Help. I have my kids baby pics and I dont want to loose them. My wife is going to kill me if I do.

My System SpecsSystem Spec
.

01 Jul 2012   #2
Microsoft MVP

 

Work through these steps for Troubleshooting Windows 7 Failure to Boot.

Note that you can run Startup Repair forever and it won't work if the correct Windows 7 or System Reserved partition are not first marked Active. And it may not repair unless disinfected first if required.

Your files are almost always retrieveable via a rescue disk so stop worrying unless you somehow scrambled the partition by a resizing failure, deleted it or have a HD failure.

You can see a picture of your disk partitions now using the Partition Wizard CD in the tutorial, and if you post back a camera snap of it's drive map we may spot the problem straight away.
My System SpecsSystem Spec
03 Jul 2012   #3

64 windows pro
 
 

I tried loading the antivirus offline and I was able to erase a virus. I reboot the system but I continue to get the same error message. [ATTACH]Attachment 219419[/ATTACH]
My System SpecsSystem Spec
.


03 Jul 2012   #4

64 windows pro
 
 

My System SpecsSystem Spec
03 Jul 2012   #5
Microsoft MVP

 

Continue working through each Troubleshooting step in the tutorial. If you'll report back the results of each we may have others.

Test your hardware as given in the note at beginning of tutorial.

Your system may not be fully clean yet. Run Defender offline again until you can get into Safe Mode with Networking to run Malwarebytes. Report back.
My System SpecsSystem Spec
07 Jul 2012   #6

64 windows pro
 
 

I cannot get anywhere. I run defender many times and did not find anything. i run safemode and keep getting the same error. I run Trinity and found 12 corrupted files. after that i run trinity couple times and tried safemode but did not get anywhere. Any more suggestions?
My System SpecsSystem Spec
07 Jul 2012   #7
Microsoft MVP

 

Please confirm each of the Troubleshooting steps in tutorial as you complete them.

Have you run Startup Repair - Run 3 Separate Times after confirming the Active partition?

Then did you run System Restore working backward?

Are you using Windows 7 DVD or Repair CD, from bootable DVD/CD or USB flash?

You may have cleaned up Windows 7, although I'd confirm it with Bitdefender CD myself. But until you boot in with DVD or Repair CD to run all of the Repairs it often will not start.
My System SpecsSystem Spec
09 Jul 2012   #8

64 windows pro
 
 

I have tried Startup Repair 3 times or more. I followed the troubleshooting steps using Partition wizard. Startup Repair asked me 2 times to system restore and I tried. I keep getting this message. "The instruction at 0xfc1b584d referenced memory at 0x00000008. The memory could not be read" I am using a Windows 7 dvd from a external dvd drive. I have a hp elitebook 2730p
My System SpecsSystem Spec
09 Jul 2012   #9
Microsoft MVP

 

Create a Windows 7 Repair CD on another machine, or write the latest official installer ISO to flash stick or burn to DVD using Steps 1 and 2 in Clean Reinstall - Factory OEM Windows 7 to run the repairs. You cannot rely on the bootable external HD repair function.

Test your RAM - Test with Memtest86+ following the steps given in tutorial to test the slots and sticks.
My System SpecsSystem Spec
09 Jul 2012   #10

64 windows pro
 
 

I lost the license number for my windows 7 pro. can you access the license number through CMP?
My System SpecsSystem Spec
Reply

 BSOD after uninstalling Norton features. I cant get window to load




Thread Tools



Similar help and support threads for2: BSOD after uninstalling Norton features. I cant get window to load
Thread Forum
Help with disabling auto-load features on a website? Browsers & Mail
Solved uninstalling Norton internet Security System Security
Uninstalling Norton Online Backup Software
Solved Uninstalling Norton 360 makes Blu-Ray Drive disappear? General Discussion
Uninstalling Window 7 64-bit Installation & Setup
Issues with Uninstalling Norton Antivirus 2009 System Security
can't load additional features General Discussion

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 11:41 PM.
Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App
  

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33