Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Random BSOD about a four months now

02 Jul 2012   #1

Windows 7 Ultimate x64
 
 
Random BSOD about a four months now

So I have been having random bsods every 5 to 12 hours for the past week before this week it's been about every two or three days most of the time after the computer crashes even though it says that it is writing a memory dump when I go to look for it, it's not there so I can't find out what is wrong I have noticed that ntsokrnl.exe is a reaccurring error when it does write a dump I've had many many different errors I have had DRIVER_IRQL_LESS_THAN_OR_EQUAL_TO I've also had NTFS_FILE_SYSTEM I'll start listing them from now on and updating the forum post any help will be useful I have also replaced my memory done mem checks did a disk check reinstalled windows multiple times I'm at a complete loss here is the one dump I have been able to get

My System SpecsSystem Spec
.

02 Jul 2012   #2

Windows 7 Home Premium 64 Bit
 
 

Analysis:
It is difficult to find patterns with only one .dmp file. Yours indicates a hardware issue, which is consistent with the information you have supplied.

You do not say how you did a memory or hard disk check. If you used Memtest86+, you may need to let it run for more passes or run it again to check for errors. It does not always find errors on the first set of passes or if not enough passes were run. Further reading: Finicky RAM.


Run some hardware checks.
  • If you are overclocking any hardware, please stop.

  • If you have an SSD, make sure the following are up to date:
    • SSD firmware
    • BIOS Version
    • Chipset Drivers
    • Hard disk controller drivers/SATA drivers
    • If you have a Marvell IDE ATA/ATAPI device, make sure the drivers are up to date from the Intel site or Marvell site and not from your motherboard/vendor support site.

  • Run all but the advanced tests with SeaTools for HDDs.
    SeaTools for Windows

    SeaTools for DOS
  • Monitor temperatures during the following tests.
    Use the following programs to monitor the temperatures.
  • Run the boot version of Memtest86+ paying close attention to Parts 2 and 3 of the tutorial. Also, in case Memtest86+ misses anything and comes up with no errors, run the extended version of the Windows Memory Diagnostics Tool for at least five passes. These you may want to run overnight since they take a long time to complete (run them an hour before bed each of the next two nights and check before going to sleep that they are still running).

    warning   Warning
    Before you proceed with the following, answer these two questions: Are you still under warranty? Does your warranty allow you to open up the machine to check hardware? If you are unsure of the answers to these questions, contact your system manufacturer. WARNING: The steps that follow can void your warranty!!!


    For Part 3: If You Have Errors: If you swap any memory components, follow these steps for ESD safety:
    1. Shut down and turn off your computer.
    2. Unplug all power supplies to the computer (AC Power then battery for laptops, AC power for desktops)
    3. Hold down the power button for 30 seconds to close the circuit and ensure all power drains from components.
    4. Make sure you are grounded by using proper grounding techniques, i.e. work on an anti-static workbench, anti-static desk, or an anti-static pad. Hold something metallic while touching it to the anti-static surface, or use an anti-static wristband to attach to the anti-static material while working. If you do not have an anti-static workbench, desk, or pad, you can use your computer tower/case by finding a metal hold in it, such as a drive bay.
    Once these steps have been followed, it is safe to remove and replace components within your computer.

Posting Instructions:
It would also help to have more information about your system so we may help you better. Please follow the http://www.sevenforums.com/crashes-d...tructions.html and also, please fill in your system specs in your profile and not in a post in this thread: System Info - See Your System Specs
My System SpecsSystem Spec
02 Jul 2012   #3

Windows 7 Ultimate x64
 
 

I have already ran a disk check came back clean I also ran a Ram check with memtest ran it for like 5 hours came back clean my overclocking is off I even turned off 2 of my cores so I'm running on 4 right now My computer is not writing dumps so I can't help (it is set to write them also) with that also I checked my temps and they are sitting between 42 and 55 celcius I have replaced my ram twice and also checked that neither of the dimm slots are bad I am at a total loss I tend to be really good with this kinda stuff the only things left that could be causing the problems is either the Video card or Motherboard and I don't have the money to replace either this is really horrible
My System SpecsSystem Spec
.


02 Jul 2012   #4

Windows 7 Home Premium 64 Bit
 
 

Does not sound like you tested the RAM thoroughly enough. Further reading: Finicky RAM.

Even without the .dmps, the reports from the http://www.sevenforums.com/crashes-d...tructions.html can be helpful. Please upload them.

We should also check RAM compatibility:
Download and install CPU-Z and Upload screenshots of the CPU, Mainboard, Memory, and SPD tabs. In the SPD tab, upload an image of each slot.
Why are you turning off cores on the CPU? Does it provide more stability?
My System SpecsSystem Spec
03 Jul 2012   #5

Windows 7 Ultimate x64
 
 

I'll get the information you asked for but as for why I turned off cores I figured it would take my temps down and it take them down by like 3 degrees but it wasn't a huge difference so yeah I'll get those screenshots or actually I'll put up the reports from cpu-z instead of screenshots
My System SpecsSystem Spec
03 Jul 2012   #6

Windows 7 Ultimate x64
 
 
All my reports

on this post I am including the information from the BSOD posting instructions and the CPU-Z reports thanks for the help everyone
My System SpecsSystem Spec
03 Jul 2012   #7

Windows 7 Home Premium 64 Bit
 
 

Not all information was included in the CPU-Z .html file. We really prefer the screenshots.

I can tell you that your RAM is not compatible with your processor:
AMD Phenom

System Building and Compatibility

AMD Memory for Systems

Your crash reports indicate a possible problem with your Windows installation. Please follow the Windows Genuine and Activation Issue Posting Instructions. Post the results in your next post; do not start a new thread.
Quote   Quote: Originally Posted by Brink
NOTE: The MGADIAG report does not contain any sensitive or personal information, and is best posted un-edited for us to be able to help.

7. Select (highlight) all of the MGADiag report that you just pasted, and click on the code box # toolbar icon to wrap the report in a code box when posted. (see screenshot below)

Attachment 219577
My System SpecsSystem Spec
04 Jul 2012   #8

Windows 7 Ultimate x64
 
 

Code:
Diagnostic Report (1.9.0027.0):
-----------------------------------------
Windows Validation Data-->

Validation Code: 0
Cached Online Validation Code: N/A, hr = 0xc004f012
Windows Product Key: *****-*****-WQ3WV-7T4MW-TYR8F
Windows Product Key Hash: m378KcNbcVR097FKwqB0BulnvHI=
Windows Product ID: 00426-OEM-9154351-99726
Windows Product ID Type: 3
Windows License Type: OEM System Builder
Windows OS version: 6.1.7601.2.00010100.1.0.001
ID: {E7336195-B212-41DB-A4A7-FC7C1FFD6242}(1)
Is Admin: Yes
TestCab: 0x0
LegitcheckControl ActiveX: N/A, hr = 0x80070002
Signed By: N/A, hr = 0x80070002
Product Name: Windows 7 Ultimate
Architecture: 0x00000009
Build lab: 7601.win7sp1_rtm.101119-1850
TTS Error: 
Validation Diagnostic: 
Resolution Status: N/A

Vista WgaER Data-->
ThreatID(s): N/A, hr = 0x80070002
Version: N/A, hr = 0x80070002

Windows XP Notifications Data-->
Cached Result: N/A, hr = 0x80070002
File Exists: No
Version: N/A, hr = 0x80070002
WgaTray.exe Signed By: N/A, hr = 0x80070002
WgaLogon.dll Signed By: N/A, hr = 0x80070002

OGA Notifications Data-->
Cached Result: N/A, hr = 0x80070002
Version: N/A, hr = 0x80070002
OGAExec.exe Signed By: N/A, hr = 0x80070002
OGAAddin.dll Signed By: N/A, hr = 0x80070002

OGA Data-->
Office Status: 109 N/A
OGA Version: N/A, 0x80070002
Signed By: N/A, hr = 0x80070002
Office Diagnostics: 025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3

Browser Data-->
Proxy settings: N/A
User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)
Default Browser: C:\Program Files (x86)\Internet Explorer\iexplore.exe
Download signed ActiveX controls: Prompt
Download unsigned ActiveX controls: Disabled
Run ActiveX controls and plug-ins: Allowed
Initialize and script ActiveX controls not marked as safe: Disabled
Allow scripting of Internet Explorer Webbrowser control: Disabled
Active scripting: Allowed
Script ActiveX controls marked as safe for scripting: Allowed

File Scan Data-->
File Mismatch: C:\Windows\system32\wat\watadminsvc.exe[Hr = 0x80070003]
File Mismatch: C:\Windows\system32\wat\npwatweb.dll[Hr = 0x80070003]
File Mismatch: C:\Windows\system32\wat\watux.exe[Hr = 0x80070003]
File Mismatch: C:\Windows\system32\wat\watweb.dll[Hr = 0x80070003]

Other data-->
Office Details: <GenuineResults><MachineData><UGUID>{E7336195-B212-41DB-A4A7-FC7C1FFD6242}</UGUID><Version>1.9.0027.0</Version><OS>6.1.7601.2.00010100.1.0.001</OS><Architecture>x64</Architecture><PKey>*****-*****-*****-*****-TYR8F</PKey><PID>00426-OEM-9154351-99726</PID><PIDType>3</PIDType><SID>S-1-5-21-2488707950-3747744445-3465848908</SID><SYSTEM><Manufacturer>System manufacturer</Manufacturer><Model>System Product Name</Model></SYSTEM><BIOS><Manufacturer>American Megatrends Inc.</Manufacturer><Version>0303   </Version><SMBIOSVersion major="2" minor="5"/><Date>20100930000000.000000+000</Date></BIOS><HWID>70553807018400F6</HWID><UserLCID>0409</UserLCID><SystemLCID>0409</SystemLCID><TimeZone>Eastern Standard Time(GMT-05:00)</TimeZone><iJoin>0</iJoin><SBID><stat>3</stat><msppid></msppid><name></name><model></model></SBID><OEM/><GANotification/></MachineData><Software><Office><Result>109</Result><Products/><Applications/></Office></Software></GenuineResults>  

Spsys.log Content: 0x80070002

Licensing Data-->
Software licensing service version: 6.1.7601.17514

Name: Windows(R) 7, Ultimate edition
Description: Windows Operating System - Windows(R) 7, OEM_COA_NSLP channel
Activation ID: cfb3e52c-d707-4861-af51-11b27ee6169c
Application ID: 55c92734-d682-4d71-983e-d6ec3f16059f
Extended PID: 00426-00182-543-599726-02-1033-7601.0000-1862012
Installation ID: 016195902876153380609060156911341534257972596275259766
Processor Certificate URL: http://go.microsoft.com/fwlink/?LinkID=88338
Machine Certificate URL: http://go.microsoft.com/fwlink/?LinkID=88339
Use License URL: http://go.microsoft.com/fwlink/?LinkID=88341
Product Key Certificate URL: http://go.microsoft.com/fwlink/?LinkID=88340
Partial Product Key: TYR8F
License Status: Initial grace period
Time remaining: 43200 minute(s) (30 day(s))
Remaining Windows rearm count: 3
Trusted time: 7/4/2012 9:39:59 AM

Windows Activation Technologies-->
HrOffline: 0x00000000
HrOnline: N/A
HealthStatus: 0x0000000000000000
Event Time Stamp: N/A
ActiveX: Not Registered - 0x80040154
Admin Service: Not Registered - 0x80040154
HealthStatus Bitmask Output:


HWID Data-->
HWID Hash Current: NgAAAAEABAABAAEAAAADAAAAAgABAAEAln3O1ULkVPlcQTiYEDNYhnIiyiyygq+nKsJrkmrg

OEM Activation 1.0 Data-->
N/A

OEM Activation 2.0 Data-->
BIOS valid for OA 2.0: yes, but no SLIC table
Windows marker version: N/A
OEMID and OEMTableID Consistent: N/A
BIOS Information: 
  ACPI Table Name	OEMID Value	OEMTableID Value
  APIC			093010		APIC1359
  FACP			093010		FACP1359
  SRAT			AMD   		FAM_F_10
  HPET			093010		OEMHPET 
  MCFG			093010		OEMMCFG 
  OEMB			093010		OEMB1359
  SSDT			A M I 		POWERNOW
My System SpecsSystem Spec
04 Jul 2012   #9

Microsoft Community Contributor Award Recipient

Windows 7 Ult. x64 Windows 8.1 x64
 
 

Code:
File Scan Data-->
File Mismatch: C:\Windows\system32\wat\watadminsvc.exe[Hr = 0x80070003]
File Mismatch: C:\Windows\system32\wat\npwatweb.dll[Hr = 0x80070003]
File Mismatch: C:\Windows\system32\wat\watux.exe[Hr = 0x80070003]
File Mismatch: C:\Windows\system32\wat\watweb.dll[Hr = 0x80070003]

License Status: Initial grace period
Time remaining: 43200 minute(s) (30 day(s))
Have you activated your installation? If not, activate it, update it completely, then re-run the MGADIAG report and paste the new copy here.

Regards,
Golden
My System SpecsSystem Spec
04 Jul 2012   #10

Windows 7 Ultimate x64
 
 

Yeah it hadn't been activated I just recently reinstalled but here is updated Report


Code:
Diagnostic Report (1.9.0027.0):
-----------------------------------------
Windows Validation Data-->

Validation Code: 0
Cached Online Validation Code: N/A, hr = 0xc004f012
Windows Product Key: *****-*****-WQ3WV-7T4MW-TYR8F
Windows Product Key Hash: m378KcNbcVR097FKwqB0BulnvHI=
Windows Product ID: 00426-OEM-9154351-99726
Windows Product ID Type: 3
Windows License Type: OEM System Builder
Windows OS version: 6.1.7601.2.00010100.1.0.001
ID: {E7336195-B212-41DB-A4A7-FC7C1FFD6242}(3)
Is Admin: Yes
TestCab: 0x0
LegitcheckControl ActiveX: N/A, hr = 0x80070002
Signed By: N/A, hr = 0x80070002
Product Name: Windows 7 Ultimate
Architecture: 0x00000009
Build lab: 7601.win7sp1_gdr.120503-2030
TTS Error: 
Validation Diagnostic: 
Resolution Status: N/A

Vista WgaER Data-->
ThreatID(s): N/A, hr = 0x80070002
Version: N/A, hr = 0x80070002

Windows XP Notifications Data-->
Cached Result: N/A, hr = 0x80070002
File Exists: No
Version: N/A, hr = 0x80070002
WgaTray.exe Signed By: N/A, hr = 0x80070002
WgaLogon.dll Signed By: N/A, hr = 0x80070002

OGA Notifications Data-->
Cached Result: N/A, hr = 0x80070002
Version: N/A, hr = 0x80070002
OGAExec.exe Signed By: N/A, hr = 0x80070002
OGAAddin.dll Signed By: N/A, hr = 0x80070002

OGA Data-->
Office Status: 109 N/A
OGA Version: N/A, 0x80070002
Signed By: N/A, hr = 0x80070002
Office Diagnostics: 025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3

Browser Data-->
Proxy settings: N/A
User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)
Default Browser: C:\Users\David\AppData\Local\Google\Chrome\Application\chrome.exe
Download signed ActiveX controls: Prompt
Download unsigned ActiveX controls: Disabled
Run ActiveX controls and plug-ins: Allowed
Initialize and script ActiveX controls not marked as safe: Disabled
Allow scripting of Internet Explorer Webbrowser control: Disabled
Active scripting: Allowed
Script ActiveX controls marked as safe for scripting: Allowed

File Scan Data-->
File Mismatch: C:\Windows\system32\wat\watadminsvc.exe[Hr = 0x80070003]
File Mismatch: C:\Windows\system32\wat\npwatweb.dll[Hr = 0x80070003]
File Mismatch: C:\Windows\system32\wat\watux.exe[Hr = 0x80070003]
File Mismatch: C:\Windows\system32\wat\watweb.dll[Hr = 0x80070003]

Other data-->
Office Details: <GenuineResults><MachineData><UGUID>{E7336195-B212-41DB-A4A7-FC7C1FFD6242}</UGUID><Version>1.9.0027.0</Version><OS>6.1.7601.2.00010100.1.0.001</OS><Architecture>x64</Architecture><PKey>*****-*****-*****-*****-TYR8F</PKey><PID>00426-OEM-9154351-99726</PID><PIDType>3</PIDType><SID>S-1-5-21-2488707950-3747744445-3465848908</SID><SYSTEM><Manufacturer>System manufacturer</Manufacturer><Model>System Product Name</Model></SYSTEM><BIOS><Manufacturer>American Megatrends Inc.</Manufacturer><Version>0303   </Version><SMBIOSVersion major="2" minor="5"/><Date>20100930000000.000000+000</Date></BIOS><HWID>70553807018400F6</HWID><UserLCID>0409</UserLCID><SystemLCID>0409</SystemLCID><TimeZone>Eastern Standard Time(GMT-05:00)</TimeZone><iJoin>0</iJoin><SBID><stat>3</stat><msppid></msppid><name></name><model></model></SBID><OEM/><GANotification/></MachineData><Software><Office><Result>109</Result><Products/><Applications/></Office></Software></GenuineResults>  

Spsys.log Content: 0x80070002

Licensing Data-->
Software licensing service version: 6.1.7601.17514

Name: Windows(R) 7, Ultimate edition
Description: Windows Operating System - Windows(R) 7, OEM_COA_NSLP channel
Activation ID: cfb3e52c-d707-4861-af51-11b27ee6169c
Application ID: 55c92734-d682-4d71-983e-d6ec3f16059f
Extended PID: 00426-00182-543-599726-02-1033-7601.0000-1862012
Installation ID: 015135926235272490872350321712942166448101541700726576
Processor Certificate URL: http://go.microsoft.com/fwlink/?LinkID=88338
Machine Certificate URL: http://go.microsoft.com/fwlink/?LinkID=88339
Use License URL: http://go.microsoft.com/fwlink/?LinkID=88341
Product Key Certificate URL: http://go.microsoft.com/fwlink/?LinkID=88340
Partial Product Key: TYR8F
License Status: Licensed
Remaining Windows rearm count: 3
Trusted time: 7/4/2012 10:32:45 AM

Windows Activation Technologies-->
HrOffline: 0x00000000
HrOnline: N/A
HealthStatus: 0x0000000000000000
Event Time Stamp: N/A
ActiveX: Not Registered - 0x80040154
Admin Service: Not Registered - 0x80040154
HealthStatus Bitmask Output:


HWID Data-->
HWID Hash Current: NgAAAAEABAABAAEAAAADAAAAAgABAAEAln3O1ULkVPlcQTiYEDNYhnIiyiyygq+nKsJrkgLQ

OEM Activation 1.0 Data-->
N/A

OEM Activation 2.0 Data-->
BIOS valid for OA 2.0: yes, but no SLIC table
Windows marker version: N/A
OEMID and OEMTableID Consistent: N/A
BIOS Information: 
  ACPI Table Name	OEMID Value	OEMTableID Value
  APIC			093010		APIC1359
  FACP			093010		FACP1359
  SRAT			AMD   		FAM_F_10
  HPET			093010		OEMHPET 
  MCFG			093010		OEMMCFG 
  OEMB			093010		OEMB1359
  SSDT			A M I 		POWERNOW
My System SpecsSystem Spec
Reply

 Random BSOD about a four months now




Thread Tools



Similar help and support threads for2: Random BSOD about a four months now
Thread Forum
Random BSODs been happening every 2-3 days or so, for 6 months. BSOD Help and Support
Random BSOD over last few months, tried debug on my own w/o luck BSOD Help and Support
Been getting random BSOD for months BSOD Help and Support
Two Months of random, yet consistent, BSOD's BSOD Help and Support
Random [BSOD] for a few months BSOD Help and Support
Solved random BSOD, restarts for the past 2 months BSOD Help and Support
Random BSOD for the pass 3 months BSOD Help and Support

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 08:50 PM.
Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App
  

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33