Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: BSOD kernel_data_inpage_error after install new ssd


06 Jul 2012   #1

win 7 home x64
 
 
BSOD kernel_data_inpage_error after install new ssd

hi! I have a Asus ep121 tablet that ship out with 32GB ssd. so I upgraded it with midigitalssd MyDigitalSSD 128GB 50mm BP3 Bullet Proof 3 mSATA 6G SSD | My Digital Discount and after replaced the ssd, everything seems to be working fine untill I hit hibernation. When waking up the tablet, it will have BSOD kernel_data_inpage_error with Stop: 0x0000007a and restart itself. It will also happen when I plug in the power cord during useage.
I thought it was a bad drive and have it replace again, but the 2nd ssd is doing the same thing. What can I do? Please Help!

My System SpecsSystem Spec
.

06 Jul 2012   #2

Windows 7 Home Premium 64 Bit
 
 

SSD Troubleshooting:
For your SSD:
  • Make sure the following are up to date:
    • SSD firmware
    • BIOS Version
    • Chipset Drivers
    • Hard disk controller drivers/SATA drivers
    • If you have a Marvell IDE ATA/ATAPI device, make sure the drivers are up to date from the Intel site or Marvell site and not from your motherboard/vendor support site.

  • Try doing a power cycle of the SSD. The following steps should be carried out and take ~1 hour to complete.
    1. Power off the system.
    2. Remove all power supplies (ac adapter then battery for laptop, ac adapter for desktop)
    3. Hold down the power button for 30 seconds to close the circuit and drain all components of power.
    4. Reconnect all power supplies (battery then ac adapter for laptop, ac adapter for desktop)
    5. Turn on the system and enter the BIOS (see your manual for the steps to enter the BIOS)
    6. Let the computer remain in the BIOS for 20 minutes.
    7. Follow steps 1-3 and physically remove the SSD from the system by disconnecting the cables for a desktop or disconnecting the drive from the junction for a laptop.
    8. Leave the drive disconnected for 30 seconds to let all power drain from it.
    9. Replace the drive connection(s) and then do steps 4-8 again.
    10. Repeat steps 1-4.
    11. Start your computer normally and run Windows.

    The above steps were a result of: Why did my SSD "disappear" from my system? - Crucial Community

    While that may not be your drive, a power cycle should be the same on all SSD drives. See how the system responds after the SSD power cycle.
BSOD Instructions:
If you need further help after doing the above, please follow the http://www.sevenforums.com/crashes-d...tructions.html, and please fill in your system specs in your profile and not in a post in this thread: System Info - See Your System Specs
My System SpecsSystem Spec
Reply

 BSOD kernel_data_inpage_error after install new ssd




Thread Tools



Similar help and support threads for2: BSOD kernel_data_inpage_error after install new ssd
Thread Forum
BSOD: KERNEL_DATA_INPAGE_ERROR 7A: getting worse... BSOD Help and Support
Solved Bsod kernel_data_inpage_error BSOD Help and Support
BSOD 'Kernel_Data_Inpage_Error' BSOD Help and Support
Bsod kernel_data_inpage_error BSOD Help and Support
[BSOD] - kernel_data_inpage_error BSOD Help and Support
Kernel_Data_Inpage_Error BSOD BSOD Help and Support
Bsod --> kernel_data_inpage_error BSOD Help and Support

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 11:44 PM.
Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App
  

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33