Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: BSOD on startup, several startups and repairs required to boot Windows


07 Jul 2012   #1

Microsoft Windows 7 Professional 64-bit 7601 Multiprocessor Free Service Pack 1
 
 
BSOD on startup, several startups and repairs required to boot Windows

Hello, This is my first custom built computer. I've had the same similar problem for the past year. I have continuous problems starting up and BSOD. My computer will not start up properly at times. It also seems like this problem happens if my computer is off, not in sleep mode, for longer than 24 hours. It involves several restarts. I've checked my hard drive and memory for bad sectors and not found anything. I've run both the memtest and the windows memory test several times and found no problems.

There was one post I found on a seperate site that talked about ASRock m/b having problem with Ram voltage so I've manually changed the BIOS to be the voltage required for the Ram. Seemed like it fixed it temporarily but quickly started getting more BSOD.

Recently updated AMD drivers and was completely unable to get into Windows. When I restored the system to before the AMD updates I was able to get into Windows.





Some of the BSOD:
  • Bad_Pool_Header
  • Bug_Code
  • Memory_Management


Below are my system specs:
  • Processor: AMD Phenom II X4 840 3.2GHz Socket AM3 95W Quad-Core
  • Motherboard: ASRock 890GX PRO3 AM3+ AMD 890GX
  • RAM: 4 GB - Patriot G Series ‘Sector 5’ Edition 4GB (2 x 2GB) 240-Pin DDR3 SDRAM DDR3 1600
  • Hard Drive: 2 TB - HITACHI Deskstar 7K2000
  • Graphics Card: Visiontek 900299 Radeon HD 4670 Graphic Card - 750 MHz Core - 1 GB DDR3 SDRAM - PCI Express 2.0 x16 - 1600 MHz Memory Clock - 2560 x 1600 - CrossFireX
  • DVD Drive: ASUS 24X DVD Burner
Windows 7 . . .
- x86 (x64)
- Professional
- Full retail version
- Age of system (hardware)? 1 Year
- What is the age of OS installation - 1 Year (reinstalled once)


I've attached the dump files and system health report.

Can anyone help with this ongoing problem?


My System SpecsSystem Spec
.

07 Jul 2012   #2

Windows 7 Home Premium 64 Bit
 
 

Software Concerns:
Recommend removing your ASRock utilities through Start Menu -> Control Panel -> Uninstall a program. They can provide software interfaces with the hardware for overclocking, and even when the overclock is not enabled, that interface can cause instability. They are also not needed for the system to function properly and may reduce system resources.

Remove any fast USB charging utilities. Such utilities put the usb ports in an unnatural power state that can cause instability and crashes.

Analysis:
Crashes primarily point to memory issues.
  • If you are overclocking any hardware, please stop.

  • Run the boot version of Memtest86+ paying close attention to Parts 2 and 3 of the tutorial. Also, in case Memtest86+ misses anything and comes up with no errors, run the extended version of the Windows Memory Diagnostics Tool for at least five passes. These you may want to run overnight since they take a long time to complete (run them an hour before bed each of the next two nights and check before going to sleep that they are still running).
    warning   Warning
    Before you proceed with the following, answer these two questions: Are you still under warranty? Does your warranty allow you to open up the machine to check hardware? If you are unsure of the answers to these questions, contact your system manufacturer. WARNING: The steps that follow can void your warranty!!!

    For Part 3: If You Have Errors: If you swap any memory components, follow these steps for ESD safety:
    1. Shut down and turn off your computer.
    2. Unplug all power supplies to the computer (AC Power then battery for laptops, AC power for desktops)
    3. Hold down the power button for 30 seconds to close the circuit and ensure all power drains from components.
    4. Make sure you are grounded by using proper grounding techniques, i.e. work on an anti-static workbench, anti-static desk, or an anti-static pad. Hold something metallic while touching it to the anti-static surface, or use an anti-static wristband to attach to the anti-static material while working. If you do not have an anti-static workbench, desk, or pad, you can use your computer tower/case by finding a metal hold in it, such as a drive bay.
    Once these steps have been followed, it is safe to remove and replace components within your computer.

  • Download and install CPU-Z and Upload screenshots of the CPU, Mainboard, Memory, and SPD tabs. In the SPD tab, upload an image of each slot.
My System SpecsSystem Spec
08 Jul 2012   #3

Microsoft Windows 7 Professional 64-bit 7601 Multiprocessor Free Service Pack 1
 
 

Thx writhziden!

Is the BIOS the only place I need to turn overclocking off? If anything is overclocking it would be from a default setting because I barely know what overclocking is.

I've uninstalled all the ASRock utilities. Today I also ran the extended Windows Memory Diagnostic Tool with 5 passes. No errors came up in the event display. However, I did notice there were several errors in the event viewer and have attached a screenshot of that. Not sure if that gives you any ideas about what could be going on. I've also attached a file with all screenshots from the CPU-Z program.

I'll try and run the windows diagnostic tool again and see if anything comes out.

What would next steps be?

Thanks,

Jurhill
My System SpecsSystem Spec
.


08 Jul 2012   #4

Microsoft Windows 7 Professional 64-bit 7601 Multiprocessor Free Service Pack 1
 
 

FYI...While looking into the overclocking in my BIOS I realized that it could be updated. The BIOS has been updated from 1.1 to 1.4. Hopefully that will help some of this along.
My System SpecsSystem Spec
09 Jul 2012   #5

Windows 7 Home Premium 64 Bit
 
 

Yes, a BIOS update can provide more stability. Let us know how the system responds to that treatment.

Also, it is unlikely you are overclocking if you have not changed any settings. ASRock utilities were the only way you might have been overclocking without being aware of it, so good job in removing those.
My System SpecsSystem Spec
09 Jul 2012   #6

Microsoft Windows 7 Professional 64-bit 7601 Multiprocessor Free Service Pack 1
 
 

The newest BIOS is working. However, I'm still getting BSOD.

The second extended Ram test came up with no errors. However, when I came home today a BSOD was waiting for me.

I've attached the newest dump file.

One other thing: I've had problems leaving my computer on overnight and it randomly crashes and shutsdown. Even in sleep state. Does that give any clues? Does the new dump file point at anything?
My System SpecsSystem Spec
10 Jul 2012   #7

Windows 7 Home Premium 64 Bit
 
 

Crash still points to memory. Your RAM does not appear to be compatible with your processor. XMP RAM is designed for newer processors and does not work well with Phenom II processors. You can try changing the RAM timings in the BIOS so the first four timings are 7-7-7-20 with the remaining timings automatic. Also set the frequency to 533 MHz if possible, or auto if you cannot manually set it to that frequency.

If you need help doing the above, let us know.


Further reading:
AMD Phenom

System Building and Compatibility

AMD Memory for Systems
My System SpecsSystem Spec
11 Jul 2012   #8

Microsoft Windows 7 Professional 64-bit 7601 Multiprocessor Free Service Pack 1
 
 

I changed the frequency to 1066 (533hz) and believe I got the timing as you asked however still BSOD. I have the voltage on auto and will try making it 1.6v which is a little lower than what it asks for at 1600.

As I said, Two more BSOD, they are attached. Are these still pointing to RAM? If the voltage thing doesn't work is this something where I should consider buying different RAM? Is there any other fixits out there?
My System SpecsSystem Spec
12 Jul 2012   #9

Windows 7 Home Premium 64 Bit
 
 

Yes, crashes still point to memory as the likely cause. Please upload the cpu-z memory tab screenshot again. The other tabs do not need to be uploaded again.


Also, set the DRAM voltage back to 1.5 Volts. Increasing to 1.6 Volts will not likely improve stability and may damage components. If you want help with voltage settings:
Access your BIOS and post all Voltages (CPU, RAM, NB, IMC, etc.) and all RAM settings (timings, frequency, etc.)

Thanks to Dave76 for help learning RAM Stability
My System SpecsSystem Spec
12 Jul 2012   #10

Microsoft Windows 7 Professional 64-bit 7601 Multiprocessor Free Service Pack 1
 
 

Hello,

I did reset it to 1.5v. All other power settings were on auto.

I've attached the screeen shot you asked for.

I doubt this means anything but I've noticed when the BSOD come up and I try to restart the computer, the windows repair usually works much better if i power everything off and then power back on rather than just reset.

Any other thoughts? I really appreciate the help with this
My System SpecsSystem Spec
Reply

 BSOD on startup, several startups and repairs required to boot Windows




Thread Tools



Similar help and support threads for2: BSOD on startup, several startups and repairs required to boot Windows
Thread Forum
Many startup repairs, DCOM server error, system hang on shutdown, etc General Discussion
Solved Laptop keeps doing Startup Repairs General Discussion
Windows 7 Won't Start Up, startup repairs and system restore can't fix General Discussion
system repairs starts after every time at startup Performance & Maintenance
Not starting, Startup repair, System Restore other repairs not working Backup and Restore
Windows boot error 0xc000000f every ~ 1-in-4 to 6 startups with SSD Hardware & Devices
BSOD's and Startup Repairs BSOD Help and Support

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd

All times are GMT -5. The time now is 06:54 PM.
Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App
  

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33