Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: BSOD Various errors

12 Jul 2012   #1
EvanWill

windows home premium 7 x64
 
 
BSOD Various errors

How can I fix these BSODs? After reading other forum posts, it is to my understanding that you can use my Minidump files, so I attached them to the thread.


My System SpecsSystem Spec
.
12 Jul 2012   #2
solarmystic

Windows 7 x64 Professional SP1
 
 

Hello and welcome to the forums, EvanWill!

Please follow these instructions completely so that we can have a look at your problem:-

http://www.sevenforums.com/crashes-d...tructions.html
My System SpecsSystem Spec
12 Jul 2012   #3
writhziden

Windows 7 Home Premium 64 Bit
 
 

Agreed, please follow the instructions. Also, please answer why there are .dmp files with a date of January 1st, 2001?
My System SpecsSystem Spec
.

16 Jul 2012   #4
EvanWill

windows home premium 7 x64
 
 
Sorry.

System Specs-
-Windows 7
-x64 bit Operating System
-Windows 7 Home Premium
-OEM
~2 Years Old
~2 Years OS (Unless a system restore re-installs the OS. In that case I re-installed about two months ago)

Also the dates that show up from Jan 1, 2001 were from a trip I took up to WA. For some reason the date switched on my laptop and it crashed then. I fixed the date and time once I realized.

In the BSOD Posting Instructions it said to attach the "PERFMON HTML file" but when I tried to attach it it was invalid. I see that the file is inside the Windows_NT6_BSOD_jcgriff2 but I don't know if it is supposed to be attached by itself.
My System SpecsSystem Spec
16 Jul 2012   #5
writhziden

Windows 7 Home Premium 64 Bit
 
 

Your jcgriff2 reports were incomplete. We cannot offer much advice without them. The perfmon report you need to compress (zip) and send that way. I'll do my best to analyze what we do have...


Analysis:
Crashes themselves primarily point to hardware. Run some hardware checks.
  • If you are overclocking any hardware, please stop.

  • If you have an SSD, make sure the following are up to date:
    • SSD firmware
    • BIOS Version
    • Chipset Drivers
    • Hard disk controller drivers/SATA drivers
    • If you have a Marvell IDE ATA/ATAPI device, make sure the drivers are up to date from the Intel site or Marvell site and not from your motherboard/vendor support site.

  • Run all but the advanced tests with SeaTools for HDDs.
    SeaTools for Windows

    SeaTools for DOS
  • Monitor temperatures during the following tests.
    Use the following programs to monitor the temperatures.
  • Run the boot version of Memtest86+ paying close attention to Parts 2 and 3 of the tutorial. Also, in case Memtest86+ misses anything and comes up with no errors, run the extended version of the Windows Memory Diagnostics Tool for at least five passes. These you may want to run overnight since they take a long time to complete (run them an hour before bed each of the next two nights and check before going to sleep that they are still running).

    warning   Warning
    Before you proceed with the following, answer these two questions: Are you still under warranty? Does your warranty allow you to open up the machine to check hardware? If you are unsure of the answers to these questions, contact your system manufacturer. WARNING: The steps that follow can void your warranty!!!


    For Part 3: If You Have Errors: If you swap any memory components, follow these steps for ESD safety:
    1. Shut down and turn off your computer.
    2. Unplug all power supplies to the computer (AC Power then battery for laptops, AC power for desktops)
    3. Hold down the power button for 30 seconds to close the circuit and ensure all power drains from components.
    4. Make sure you are grounded by using proper grounding techniques, i.e. work on an anti-static workbench, anti-static desk, or an anti-static pad. Hold something metallic while touching it to the anti-static surface, or use an anti-static wristband to attach to the anti-static material while working. If you do not have an anti-static workbench, desk, or pad, you can use your computer tower/case by finding a metal hold in it, such as a drive bay.
    Once these steps have been followed, it is safe to remove and replace components within your computer.

3rd Party Drivers:
The following is for informational purposes only:
Code:
hamachi.sys Thu Feb 19 03:36:41 2009 (499D3639)
usbfilter.sys Fri Apr 3 05:39:51 2009 (49D5F587)
HpqKbFiltr.sys Wed Apr 29 07:48:30 2009 (49F85AAE)
AtiPcie.sys Tue May 5 09:00:22 2009 (4A005486)
Apfiltr.sys Tue May 12 03:38:59 2009 (4A0943B3)
GEARAspiWDM.sys Mon May 18 06:17:04 2009 (4A1151C0)
enecir.sys Wed May 20 00:08:57 2009 (4A139E79)
hpdskflt.sys Wed Jul 8 12:41:38 2009 (4A54E862)
Accelerometer.sys Wed Jul 8 12:41:38 2009 (4A54E862)
mcupdate.dll Mon Jul 13 19:29:09 2009 (4A5BDF65)
AtiHdmi.sys Fri Jul 24 00:33:11 2009 (4A6955A7)
atikmdag.sys Tue Aug 4 22:14:11 2009 (4A790713)
TuneUpUtilitiesDriver64.sys Thu Sep 17 05:54:52 2009 (4AB2238C)
athrx.sys Mon Sep 21 20:47:11 2009 (4AB83AAF)
amdxata.sys Fri Mar 19 10:18:18 2010 (4BA3A3CA)
stwrt64.sys Tue Mar 23 22:01:24 2010 (4BA98E94)
dc3d.sys Wed May 18 02:07:24 2011 (4DD37E3C)
usbaapl64.sys Tue Jan 10 17:56:04 2012 (4F0CDE24)
hamachi.sys
usbfilter.sys
HpqKbFiltr.sys
AtiPcie.sys
Apfiltr.sys
GEARAspiWDM.sys
enecir.sys
hpdskflt.sys
Accelerometer.sys
mcupdate.dll
AtiHdmi.sys
atikmdag.sys
TuneUpUtilitiesDriver64.sys
athrx.sys
amdxata.sys
stwrt64.sys
dc3d.sys
usbaapl64.sys
My System SpecsSystem Spec
Reply

 BSOD Various errors




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
BSOD - Playing WoW, Borderlands, H1Z1 - Multiple BSOD Errors
Hi Guys, Upgraded the parts to my computer around the 20th of December, and been having issues since, i have tried diagnosing the problem myself, re-installed my OS about 10 times now with different installation methods. I am having so many issues it would be crazy trying to list them all, i...
BSOD Help and Support
Win 7 Update errors, Readiness Test returning 5000+ errors Help
Need some guidance. I'm trying to help a friend who got hit by something, virus, malware etc. Cleaned that up but.... In looking over his Win 7 64bit Home Premium system, I noticed his Windows Update had not run in over a year. So I tried to run it manually and have been going down a rabbit...
Windows Updates & Activation
Easy CD Creator 5 errors, removed now CDROM errors
I was trying to troubleshoot two errors in Event Viewer and know they were caused by Easy CD Creator 5 so I uninstalled it and then my DVD players would not work. cdralw2k.sys and cdr4_2k.sys were the cause of the errors and were incompatible with Windows 7. Did a system restore to get the DVDs...
BSOD Help and Support
BSOD errors irq not less or equal too among other errors.
I built the system for a friend and I've never had BSOD errors. Please help me try to pinpoint the cause. I have seen Memory management IRQ not less or equal to They happen at all times, I've counted 6 in less than an hour then none for 8-9 hours but they always come back.
BSOD Help and Support
Boot errors,shutdown errors, wake errors.
Wake from sleep is slow and I loose control over curser for 10 sec. These are most of the errors and their numbers that I have been getting over the past 5 days. Boot duration 100,101,109,103 Stanby duration 300 Driver caused delay 351 Thumbdrive driver delay
Performance & Maintenance
bluescreens/stack dumps/memory errors/bad image errors
Hello, I've had nothing but great luck with Windows 7 and my current computer for almost a year. A couple weeks ago, however, I started getting intermittent, and seemingly random stop screens. There seems to be no pattern to the blue screens; sometimes I'll be gaming or sometimes the...
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 13:50.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App