Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: BSOD all of a sudden after 3 months after installing Windows 7, 0x124


12 Jul 2012   #1

Windows 7 Ultimate 32bit
 
 
BSOD all of a sudden after 3 months after installing Windows 7, 0x124

Hi guys,

I was wondering if you can help on my problem, I have tried doing the suggestions on most of the threads here but i still get the 0x124 error. I have tried and passed memtest86+ and prime95 as well. Any help is greatly appreciated!


I have also attached the files as instructed on BSOD - Posting Instructions.

Windows 7 Ultimate
- x86 (32-bit)
- the original installed OS on the system was Windows XP (formatted during installation of Windows 7
- full retail version
- 5 year old system after 3 months
- OS was installed 3 months ago

My System SpecsSystem Spec
.

13 Jul 2012   #2

Windows 7 Home Premium 64 Bit
 
 

System Age:
Code:
BIOS Version/Date	American Megatrends Inc. 0306, 9/5/2007
Due to the system's age, first make sure that hardware is compatible with Windows 7: Windows 7 Compatibility: Software Programs & Hardware Devices: Find Updates, Drivers, & Downloads -> Download and run the Windows 7 upgrade advisor.

Device Concerns:
Code:
MpKsl4fa04efa	ROOT\LEGACY_MPKSL4FA04EFA\0000	This device is not present, is not working properly, or does not have all its drivers installed.
It appears you have an issue with the Microsoft Security Essentials installation.

Software Concerns:
Code:
Start Menu\Programs\Driver Detective
We do not recommend automated driver update software. It often finds drivers for devices similar to but not exactly the same as the hardware actually on the system. This can lead to conflicts and blue screen crashes. If you need help finding driver updates for a certain device, please start a thread in Drivers - Windows 7 Forums instead of using software. Driver updates are not always necessary and some updates can actually decrease system stability rather than increase it, so it is usually better not to update unless a device or its driver is causing problems with the system. If it ain't broke, don't fix it.

Analysis:
BugCheck 0x116
This crash is DirectX/graphics card related. DirectX comes installed with Windows, so this may indicate Windows corruption. It may also be that you have corrupted drivers or a graphics card hardware problem.
  • If you are overclocking any hardware, please stop.

  • Check Windows for corruption. Run SFC /SCANNOW Command - System File Checker up to three times to fix all errors with a restart in between each. Post back if it continues to show errors after a fourth run or if the first run comes back with no integrity violations. Use OPTION THREE of SFC /SCANNOW Command - System File Checker to provide us with the sfcdetails.txt file if errors occur.


Follow the steps for Diagnosing basic problems with DirectX. To re-install your display card drivers as outlined in the DirectX link, use the following steps.
  1. Download the drivers you want for your display card(s)
  2. Click Start Menu
  3. Click Control Panel
  4. Click Uninstall a program
  5. For NVIDIA:
    • Uninstall the NVIDIA Graphics Driver (this should uninstall all NVIDIA software and drivers)
    • Restart your computer
    • Make sure NVIDIA 3D Vision Driver, NVIDIA 3D Vision Video Player, NVIDIA HD Audio Driver, and NVIDIA PhysX System Software are not still listed under Uninstall a program through Control Panel
    • If any remain of the above, uninstall one at a time
    • If asked to restart after uninstalling any of the above, do so, and continue uninstalling any remaining NVIDIA items until all are removed
  6. For AMD:
    • Uninstall AMD Catalyst Install Manager if it is listed (this should remove all AMD graphics software and drivers)
    • If AMD Catalyst Install Manager is not listed, use the following method to uninstall the graphics drivers (this applies to onboard graphics, as well):
      1. Click Start Menu
      2. Right Click My Computer/Computer
      3. Click Manage
      4. Click Device Manager from the list on the left
      5. Expand Display adapters
      6. Do the following for each adapter (in case you have multiple display cards)
        • Right click the adapter
        • Click Uninstall (do not click OK in the dialog box that pops up after hitting Uninstall)
        • Put a tick in Delete driver software for this device (if this option is available, otherwise just hit OK) and hit OK
      Alternatively:
      1. Login as an adminstrative user
      2. Click Start Menu
      3. Click Control Panel
      4. Click Hardware and Sound
      5. Click Device Manager (the last link under Devices and Printers)
      6. Expand Display adapters
      7. Do the following for each adapter (in case you have multiple display cards)
        • Right click the adapter
        • Click Uninstall (do not click OK in the dialog box that pops up after hitting Uninstall)
        • Put a tick in Delete driver software for this device (if this option is available, otherwise just hit OK) and hit OK
  7. Restart your computer after uninstalling drivers for all display cards
  8. Install the driver you selected for the display cards once Windows starts

Remember to try multiple versions of the graphics drivers, download them fresh, and install the freshly downloaded drivers.





warning   Warning
Before you proceed with the following, answer these two questions: Are you still under warranty? Does your warranty allow you to open up the machine to check hardware? If you are unsure of the answers to these questions, contact your system manufacturer. WARNING: The steps that follow can void your warranty!!!


For 0x116 Video TDR Error crashes:

  • Quote   Quote: Originally Posted by H2SO4 View Post
    These are all stop 0x116 VIDEO_TDR_FAILURE conditions.

    It's not a true crash, in the sense that the bluescreen was initiated only because the combination of video driver and video hardware was being unresponsive, and not because of any synchronous processing exception.

    Since Vista, the "Timeout Detection and Recovery" (TDR) components of the OS video subsystem have been capable of doing some truly impressive things to try to recover from issues which would have caused earlier OSs like XP to crash. As a last resort, the TDR subsystem sends the video driver a "please restart yourself now!" command and waits a few seconds. If there's no response, the OS concludes that the video driver/hardware combo has truly collapsed in a heap, and it fires off that stop 0x116 BSOD.

    If playing with video driver versions hasn't helped, make sure the box is not overheating. Try removing a side panel and aiming a big mains fan straight at the motherboard and GPU. Run it like that for a few hours or days - long enough to ascertain whether cooler temperatures make a difference. If so, it might be as simple as dust buildup and subsequently inadequate cooling.
    The above quote was taken from http://www.sevenforums.com/crashes-d...tml#post280172, which is linked to in usasma's thread about this error. Closely follow the first three posts of usasma's thread outlining STOP 0x116: VIDEO_TDR_ERROR troubleshooting and proceed through each step. Let us know if you need further help.
BugCheck 0x124
You have a 0x124 hardware bugcheck. If the system is still under warranty, I would recommend sending it in to have diagnostic tests done and any bad hardware replaced.

warning   Warning
Before you proceed with the following, answer these two questions: Are you still under warranty? Does your warranty allow you to open up the machine to check hardware? If you are unsure of the answers to these questions, contact your system manufacturer. WARNING: The steps that follow can void your warranty!!!

For your hardware stop 0x124 crash, read through Stop 0x124 - what it means and what to try and use the following hardware checks to supplement that link.
  • If you are overclocking any hardware, please stop.

  • If you have an SSD, make sure the following are up to date:
    • SSD firmware
    • BIOS Version
    • Chipset Drivers
    • Hard disk controller drivers/SATA drivers
    • If you have a Marvell IDE ATA/ATAPI device, make sure the drivers are up to date from the Intel site or Marvell site and not from your motherboard/vendor support site.

  • Run all but the advanced tests with SeaTools for HDDs.
    SeaTools for Windows

    SeaTools for DOS
  • Monitor temperatures during the following tests.
    Use the following programs to monitor the temperatures.
  • Run the boot version of Memtest86+ paying close attention to Parts 2 and 3 of the tutorial. Also, in case Memtest86+ misses anything and comes up with no errors, run the extended version of the Windows Memory Diagnostics Tool for at least five passes. These you may want to run overnight since they take a long time to complete (run them an hour before bed each of the next two nights and check before going to sleep that they are still running).

    For Part 3: If You Have Errors: If you swap any memory components, follow these steps for ESD safety:
    1. Shut down and turn off your computer.
    2. Unplug all power supplies to the computer (AC Power then battery for laptops, AC power for desktops)
    3. Hold down the power button for 30 seconds to close the circuit and ensure all power drains from components.
    4. Make sure you are grounded by using proper grounding techniques, i.e. work on an anti-static workbench, anti-static desk, or an anti-static pad. Hold something metallic while touching it to the anti-static surface, or use an anti-static wristband to attach to the anti-static material while working. If you do not have an anti-static workbench, desk, or pad, you can use your computer tower/case by finding a metal hold in it, such as a drive bay.
    Once these steps have been followed, it is safe to remove and replace components within your computer.

Remember to read closely through Stop 0x124 - what it means and what to try for the crash.

You Already Did Some Steps:
Before you get frustrated with me for not reading your first post, I did read it, and I know you did some of the steps above. Make sure you did them as outlined above. For instance, Memtest86+ should be run for 7-10 passes, but you did not specify how many passes you ran. You also did not say which of the Prime95 tests you ran and for how long. Small FFTs, In-Place Large FFTs, and Blend should each be run for at least three hours.
My System SpecsSystem Spec
Reply

 BSOD all of a sudden after 3 months after installing Windows 7, 0x124




Thread Tools



Similar help and support threads for2: BSOD all of a sudden after 3 months after installing Windows 7, 0x124
Thread Forum
BSOD 0x124 windows 7 x64 sp1 after zero format & image backup restore BSOD Help and Support
Solved Months of system being fine, sudden multiple BSODs this morning BSOD Help and Support
BSOD starts 2 months after clean re-install of Windows 7 on HP Laptop BSOD Help and Support
Sudden Partition Lost After Installing 7 Hardware & Devices
Windows 7 BSOD 0x124 BSOD Help and Support
BSOD 0x124 During Windows 7x64 Setup -- Help!! Installation & Setup
Microsoft: Windows 7 RC in 2 Months, RTM in as Early as 6 Months News

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 10:20 AM.
Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App
  

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33