Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.

Windows 7: random BSOD related to ntoskrnl.exe

14 Jul 2012   #1

64 bit
random BSOD related to ntoskrnl.exe

i keep getting bsods with diffrent titles (IRQL_NOT_LESS_OR_EQUAL, PAGE FAULT_IN_NONPAGES_AREA, ..... ) it happens 3-4 times a day and its really getting annoying
can u help me plz how to fix this problem ?
here are some dump files

My System SpecsSystem Spec
14 Jul 2012   #2

Microsoft Windows 7 Ultimate: x64 (SP1)

Hello phantomsa and welcome to Sevenforums.

To be able to help you, we'd need a full attachment in order for us to analyse your crash. The below link will guide you through some steps for catching these files. If you have any questions just ask us.

With that said, I'll look at the stand-alone dumps.

BSOD Analyse

ATI-driver was blamed. Do the below tutorial in order to achieve a clean install without leftover files of the driver.

i) Make your way to ATI Drivers - Downloads and download the latest driver for your card, save it to your desktop for instance
ii) Uninstall the Graphic driver you currently have and all its extensions (do not reboot yet)
iii) Download Driver Sweeper
iv) Get to safe mode (without network) and search for Driver Sweeper in your
v) Select all the ATI components and analyse them
vi) Clean them, head into Windows without internet and install the driver you've downloaded previously


Looking at your bugcheck it's likely that a memory corruption event was triggered. Though a driver could be causing the memory to be borked, but we're usually suggesting a memory test before moving forward. Do a scan with Memtest86+. Memtest is a scanner that'll check your sticks for errors.

warning   Warning
Note that the below instructions may break your WARRANTY rules. If you're unsure check manuals, separated warranty papers, stickers on computer for secure permission.

To ensure that we'll know if it's the slots on the motherboard that's broken, or the sticks itself - we have a little procedure we'll recommend. Remove 1 stick, scan the other with Memtest in the current slot. After 7 passes, move the stick to another slot and scan, and so on and so forth until you've scanned all the sticks, and all the slots, one by one.

Memtest86+ - Advanced Memory Diagnostic Tool

Invalid system memory was referenced.  This cannot be protected by try-except,
it must be protected by a Probe.  Typically the address is just plain bad or it
is pointing at freed memory.
Arg1: fffff1001673859c, memory referenced.
Arg2: 0000000000000001, value 0 = read operation, 1 = write operation.
Arg3: fffff88007864b95, If non-zero, the instruction address which referenced the bad memory
Arg4: 0000000000000007, (reserved)
Best Regards,
My System SpecsSystem Spec

 random BSOD related to ntoskrnl.exe

Thread Tools

Similar help and support threads for2: random BSOD related to ntoskrnl.exe
Thread Forum
BSOD seemingly random related to ntoskrnl.exe BSOD Help and Support
BSOD most related to ntoskrnl.exe BSOD Help and Support
Random Driver Related BSOD (ntoskrnl.exe and ntfs.sys) BSOD Help and Support
random bsod usbport.sys ntoskrnl.exe related BSOD Help and Support
Constant random BSOD, related to ntoskrnl and MEMORY MANAGEMENT BSOD Help and Support
Solved BSOD mostly related to NTOSKRNL.exe BSOD Help and Support
BSOD related with ntoskrnl.exe BSOD Help and Support

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd

All times are GMT -5. The time now is 09:28.
Twitter Facebook Google+

Windows 7 Forums

Seven Forums Android App Seven Forums IOS App