Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.

Windows 7: no bootup ..tried all methods..Crash out completely

15 Jul 2012   #1

Windows 7 Home Premium 64bit.
no bootup ..tried all methods..Crash out completely

Respected techies...kindly help me out ...

Problem: a week ago my laptop suddenly stopped booting.i dint do anything new such as hardware or software change which might have caused it....although my win updates and vaio updates are always on

Laptop specs:sony vaio.preinstalled OS (no CD)win 7 home premium 64 bit

Solutions tried:
1.mem diagnostics carried out. through F8 options...did no good mode(All types).Last known good config....dint work as well

In all of above i get win7 wallpaper ....mouse pointer only options

4.tried installing win xp luck...gets an error screen with some hex code

5.tried installing fresh win 7 ULTIMATE...plz note i have home premium

in this case i get stuck on "Setup is starting options"...plz note i waited for an hour.
for some time the yellow light blinks then it stops

Ulltimately ,i may say iam tired of retrying all of above.So do i have another option??

I have sensitive and imp data on my D:/ drive..i need it.
My win installed directory is C:/


My System SpecsSystem Spec

15 Jul 2012   #2

Windows 7 Home Premium 64 Bit

Troubleshooting Windows 7 Failure to Boot may help to an extent. There are steps there that will at least allow you to backup your data.

Also, try clearing the BIOS software/hardware connections and clearing temporary memory of corruption prior to installing:
  1. Shut down and turn off the computer.
  2. Unplug the computer from the wall or surge protector (then remove the battery if it is a laptop).
  3. "Remove the computer from any port replicator or docking station, disconnect
    cables to printers or devices such as external monitors, USB memory sticks or SD cards, headset or external speakers, mouse or auxiliary keyboard, turn off WIFI and Bluetooth wireless devices." (Use Hard Reset to Resolve Hardware and Software Issues HP Pavilion dv5000 Notebook PC series - HP Customer Care (United States - English))
  4. Hold down the power button for 30 seconds. This closes the circuit and ensures all
    power from components is drained to clear the software connections between the BIOS
    and hardware and clear any corruption in the temporary memory.
  5. (If it is a laptop, plug the battery back into the laptop and then) Plug the computer back into the wall. Do not reconnect any unnecessary peripherals; monitor, keyboard,
    and mouse should suffice and be the only peripherals reconnected.
  6. Turn it on to reinitialize the software connections between the BIOS and hardware

Use these steps to install: Clean Reinstall - Factory OEM Windows 7

I would suggest only installing with your licensed version of Windows 7 and not with Ultimate.
My System SpecsSystem Spec

 no bootup ..tried all methods..Crash out completely

Thread Tools

Similar help and support threads
Thread Forum
BSOD Crash. Computer completely freezes.
Hi guys, I'm having trouble with my PC. Sometimes the monitor doesn't receive a signal. When it does come on it freezes completely or i get the infamous blue screen of death. Have attached my ZIP folder after the scan, any idea what i need to do to solve this problem? Thanks in advance....
BSOD Help and Support
BSOD completely random - (not responding) then crash
Hey IT pros! Get the BSOD followed by "DISK BOOT FAILURE, INSERT SYSTEM DISK AND PRESS ENTER" I've been having these random crashes for quite a while now, as you can already tell by the sheer number of dumpfiles. The latest crash being the straw that broke the camels back. My drivers for the...
BSOD Help and Support
Notification area customizations completely lost after Explorer crash
HELLO, I think I already asked this problem here but since it wasn't resolved and since the problem is still irritating, I do bump this question up. To resume the previously reported problem, after BSOD or explorer crash, I get usually but not always all notification area application icons reset...
How do I change bootup from H20insyde back to Win 7 bootup?
Hi, I went to boot up my laptop PC and I see H20Insyde asking me for a password. I have no idea where this came from. What could have caused this? I have always booted up and the only thing I see is my normal screen from Win7 that ask for my password. How did my my PC convert over to this H20insyde...
General Discussion
Garbled display then crash after bootup
This is a problem I only have after Windows does an update and needs to restart. It will boot up fine up to the login screen but after I login the screen will suddenly become a garbled technicolor mess a few seconds in and then the computer will crash and restart. Booting up in safemode does not...
BSOD Help and Support
Install methods
Hi guys, I have a couple of questions regarding different install methods of Windows 7 (Vista as well I guess). First of all the installation types I ask about is a bootable one, that allows you to use everything in your computer. IE not in a virtual environment. These are the ones I am...
Installation & Setup

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 18:48.

Twitter Facebook Google+

Windows 7 Forums

Seven Forums Android App Seven Forums IOS App