Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: BSOD, don't know exact cause.


19 Jul 2012   #1

64 bit home premium
 
 
BSOD, don't know exact cause.

As the title says I don't know the exact cause, whether it be drivers or faulty memory.



minidump attached at bottom


My System SpecsSystem Spec
.

19 Jul 2012   #2

Windows 7 x64
 
 

Your dump file suggests that something connected via USB may be the issue.


Code:
....
*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck A, {fffff8a012258841, 2, 0, fffff80002c85216}

*** WARNING: Unable to verify timestamp for win32k.sys
*** ERROR: Module load completed but symbols could not be loaded for win32k.sys
Probably caused by : USBPORT.SYS ( USBPORT!USBPORT_Core_iMapTransfer+24a )
 
Followup: MachineOwner
---------

0: kd> !analyze -v
*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************

IRQL_NOT_LESS_OR_EQUAL (a)
An attempt was made to access a pageable (or completely invalid) address at an
interrupt request level (IRQL) that is too high.  This is usually
caused by drivers using improper addresses.
If a kernel debugger is available get the stack backtrace.
Arguments:
Arg1: fffff8a012258841, memory referenced
Arg2: 0000000000000002, IRQL
Arg3: 0000000000000000, bitfield :
    bit 0 : value 0 = read operation, 1 = write operation
    bit 3 : value 0 = not an execute operation, 1 = execute operation (only on chips which support this level of status)
Arg4: fffff80002c85216, address which referenced memory

Debugging Details:
------------------


READ_ADDRESS: GetPointerFromAddress: unable to read from fffff80002eb2100
GetUlongFromAddress: unable to read from fffff80002eb21c0
 fffff8a012258841 Paged pool

CURRENT_IRQL:  2

FAULTING_IP: 
nt!RtlCopyMemoryNonTemporal+16
fffff800`02c85216 488b0411        mov     rax,qword ptr [rcx+rdx]

CUSTOMER_CRASH_COUNT:  1

DEFAULT_BUCKET_ID:  VERIFIER_ENABLED_VISTA_MINIDUMP

BUGCHECK_STR:  0xA

PROCESS_NAME:  System
Do you have a lot of peripherals connected to your system via USB?
My System SpecsSystem Spec
19 Jul 2012   #3

64 bit home premium
 
 

[QUOTE=TypeR;2013945]Your dump file suggests that something connected via USB may be the issue.


Code:
....
*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck A, {fffff8a012258841, 2, 0, fffff80002c85216}

*** WARNING: Unable to verify timestamp for win32k.sys
*** ERROR: Module load completed but symbols could not be loaded for win32k.sys
Probably caused by : USBPORT.SYS ( USBPORT!USBPORT_Core_iMapTransfer+24a )
 
Followup: MachineOwner
---------

0: kd> !analyze -v
*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************

IRQL_NOT_LESS_OR_EQUAL (a)
An attempt was made to access a pageable (or completely invalid) address at an
interrupt request level (IRQL) that is too high.  This is usually
caused by drivers using improper addresses.
If a kernel debugger is available get the stack backtrace.
Arguments:
Arg1: fffff8a012258841, memory referenced
Arg2: 0000000000000002, IRQL
Arg3: 0000000000000000, bitfield :
    bit 0 : value 0 = read operation, 1 = write operation
    bit 3 : value 0 = not an execute operation, 1 = execute operation (only on chips which support this level of status)
Arg4: fffff80002c85216, address which referenced memory

Debugging Details:
------------------


READ_ADDRESS: GetPointerFromAddress: unable to read from fffff80002eb2100
GetUlongFromAddress: unable to read from fffff80002eb21c0
 fffff8a012258841 Paged pool

CURRENT_IRQL:  2

FAULTING_IP: 
nt!RtlCopyMemoryNonTemporal+16
fffff800`02c85216 488b0411        mov     rax,qword ptr [rcx+rdx]

CUSTOMER_CRASH_COUNT:  1

DEFAULT_BUCKET_ID:  VERIFIER_ENABLED_VISTA_MINIDUMP

BUGCHECK_STR:  0xA

PROCESS_NAME:  System
Do you have a lot of peripherals connected to your system via USB?[/QUOTEe]

Nah, only 2 razor devices, one of which I've unplugged and the bsods have seemed to stop.

It was the razer nostromo if you're wondering.
My System SpecsSystem Spec
.


Reply

 BSOD, don't know exact cause.




Thread Tools



Similar help and support threads for2: BSOD, don't know exact cause.
Thread Forum
Solved BSOD, unable to determine exact cause BSOD Help and Support
Solved BSOD on Windows 7 Don't know the exact reason BSOD Help and Support
BSOD Randomly happening all of a sudden, no exact reason. BSOD Help and Support
BSOD playing minecraft (Exact message in post) BSOD Help and Support
Solved BSOD without an exact pattern BSOD Help and Support
Solved 2 PC's - Exact/Similar Builds - BSOD's! Related? BSOD Help and Support
Various Random BSOD - Can't Pinpoint the exact error! BSOD Help and Support

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 07:58 PM.
Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App
  

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33