Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Page Fault in Nonpaged Area BSOD (Among a few others)

27 Jul 2012   #41
Capt.Jack Sparrow

Windows 7 Ultimate - 64-bit | Windows 8 Pro - 64-bit
 
 

Hi there!

Have you ran the MemTest86+ as Dave asked? If so post us the results. Make sure you run it 7 to 8 passes.


My System SpecsSystem Spec
.
27 Jul 2012   #42
silencer903

Windows 7 Home Premium 64bit
 
 

Quote   Quote: Originally Posted by Capt.Jack Sparrow View Post
Hi there!

Have you ran the MemTest86+ as Dave asked? If so post us the results. Make sure you run it 7 to 8 passes.
I ran memtest 2 days ago and let it run for 8 passes. No errors were found.
My System SpecsSystem Spec
27 Jul 2012   #43
Capt.Jack Sparrow

Windows 7 Ultimate - 64-bit | Windows 8 Pro - 64-bit
 
 

Try this free stress test: Free Software - GIMPS


Quote:
Prime95 Setup:
- extract the contents of the zip file to a location of your choice
- double click on the executable file
- select "Just stress testing"
- select the "Blend" test. If you've already run MemTest overnight you may want to run the "Small FFTs" test instead.
- "Number of torture test threads to run" should equal the number of CPU's times 2 (if you're using hyperthreading).
The easiest way to figure this out is to go to Task Manager...Performance tab - and see the number of boxes under CPU Usage History
Then run the test for 6 to 24 hours - or until you get errors (whichever comes first).
The Test selection box and the stress.txt file describes what components that the program stresses.
Run SFC /SCANNOW Command - System File Checker
My System SpecsSystem Spec
.

28 Jul 2012   #44
silencer903

Windows 7 Home Premium 64bit
 
 

I haven't had any issues for a while now since updating the BIOS and some other drivers and ran both of those tests and got no errors. I'm going to mark this as solved for now unless the issues persist. Thank you everyone for your patience and help, you just helped end a long period of frustration!
My System SpecsSystem Spec
28 Jul 2012   #45
Dave76

Microsoft Community Contributor Award Recipient

Windows 7 Ult x64 - SP1/ Windows 8 Pro x64
 
 

Glad your system is running stable.

Let us know if you have anymore crashes or questions.
My System SpecsSystem Spec
30 Jul 2012   #46
silencer903

Windows 7 Home Premium 64bit
 
 

Sad to say the problems are still here, albeit a little less frequent.

I'm pretty sure its not an issue with memory corruption, as every test I've won has not come up with any errors.
My System SpecsSystem Spec
31 Jul 2012   #47
Dave76

Microsoft Community Contributor Award Recipient

Windows 7 Ult x64 - SP1/ Windows 8 Pro x64
 
 

It is very common for any memory test to pass a few times and then show errors, it's just the way electronics are, if you are still having issues I recommend to run memtest86+ again. Run it overnight for a full 7 passes.
I searched your laptop for similar issues and RAM problems came up, repeatedly.

Have you done any of the suggestions from this previous post?
Quote   Quote: Originally Posted by Dave76 View Post
Did you Run CHKDSK with the /r option?
Download and run Seatools on your HDD.
How to use SeaTools for Windows
Short Drive Self Test and Long Drive Self Test.
Post the results here.

Disconnect any external devices, you should have only the power cord connected.
Let us know what devices you had connected previously.

Run memtest86+,again, for a minimum of 7 full passes with all RAM cards installed, best to run overnight.
Stop the test if you get any errors.
RAM - Test with Memtest86+

Sys Event Log:
In reference to the Stop message 0x0000000A crash
Code:
Event[31761]:
  Log Name: System
  Source: Application Popup
  Date: 2012-07-25T14:59:47.000
  Event ID: 26
  Task: N/A
  Level: Information
  Opcode: N/A
  Keyword: Classic
  User: N/A
  User Name: N/A
  Computer: NickWilson-PC
  Description: 
Application popup: Windows - Application Error : The instruction at 0xff141197 referenced memory at 0xfda0bdb8. The memory could not be read.
Click on OK to terminate the program

These must be previous to un-installing LogMeIn, the driver is not listed now.
Event[31619]:
  Log Name: System
  Source: Service Control Manager
  Date: 2012-07-25T13:48:42.184
  Event ID: 7000
  Task: N/A
  Level: Error
  Opcode: N/A
  Keyword: Classic
  User: N/A
  User Name: N/A
  Computer: NickWilson-PC
  Description: 
The LogMeIn Hamachi Tunneling Engine service failed to start due to the following error: 
The service did not respond to the start or control request in a timely fashion.


Event[31618]:
  Log Name: System
  Source: Service Control Manager
  Date: 2012-07-25T13:48:42.184
  Event ID: 7009
  Task: N/A
  Level: Error
  Opcode: N/A
  Keyword: Classic
  User: N/A
  User Name: N/A
  Computer: NickWilson-PC
  Description: 
A timeout was reached (30000 milliseconds) while waiting for the LogMeIn Hamachi Tunneling Engine service to connect.
Driver issues:
Code:
GEARAspiWDM.sys Mon May 18 2009 - iTunes driver
This driver is still loaded in your system.
You are having driver related crashes, un-install iTunes for testing.
If this is found to be the cause, and I've seen it be the cause before, you can get a different app for music.

Code:
SABI.sys     Thu May 28 2009 - Samsung kernel driver
Did you update all drivers from the Samsung site?

Code:
WinRing0x64.sys Sat Jul 26 2008 - many different programs that center around the using of the WinRing libraries, found in Real Temp directory.
Are you using RealTemp to monitor the CPU temps?

Did you get CheckDisk to complete?
Run CHKDSK with the /r option to correct these.
How to Run Disk Check in Windows 7
Your last crashes.
Code:
STOP 0x00000050: PAGE_FAULT_IN_NONPAGED_AREA
Usual causes:  Defective hardware (particularly memory - but not just RAM), Faulty system service, Antivirus,  Device driver, NTFS corruption, BIOS
Invalid system memory was referenced.
Arg3: fffff800035cedfa, If non-zero, the instruction address which referenced the bad memory address.
FAILURE_BUCKET_ID:  X64_0x50_nt!ObReferenceObjectByHandleWithTag+22a
------------------------------------------------------------------------------------------------------------------------------
STOP 0x0000000A: IRQL_NOT_LESS_OR_EQUAL
Usual causes:  Kernel mode driver, System Service, BIOS, Windows, Virus scanner, Backup tool, compatibility
Arg1: fffff880034fca58, memory referenced
Arg3: 0000000000000000, bitfield : bit 0 : value 0 = read operation, 1 = write operation
IMAGE_NAME:  iaStor.sys
FAILURE_BUCKET_ID:  X64_0xA_iaStor+2cdf9
------------------------------------------------------------------------------------------------------------------------------
STOP 0x00000050: PAGE_FAULT_IN_NONPAGED_AREA
Usual causes:  Defective hardware (particularly memory - but not just RAM), Faulty system service, Antivirus,  Device driver, NTFS corruption, BIOS
Invalid system memory was referenced.
Arg3: fffff80003588dfa, If non-zero, the instruction address which referenced the bad memory address.
FAILURE_BUCKET_ID:  X64_0x50_nt!ObReferenceObjectByHandleWithTag+22a
------------------------------------------------------------------------------------------------------------------------------
STOP 0x0000001E: KMODE_EXCEPTION_NOT_HANDLED
Usual causes:  Device driver, hardware, System service, compatibility, Remote control programs, memory, BIOS
Probably caused by : intelppm.sys ( intelppm+2c53 )
This dmp file was corrupt, this usually points to RAM errors.
------------------------------------------------------------------------------------------------------------------------------
STOP 0x000000D1: DRIVER_IRQL_NOT_LESS_OR_EQUAL 
Usual causes:  Device driver
Arg1: fffffa9003bf5660, memory referenced
FAILURE_BUCKET_ID:  X64_0xD1_paeusbaudiodsp_x64+2dd6
------------------------------------------------------------------------------------------------------------------------------
These crashes are indicating the tests and suggestions from my previous post needs to be implemented.

Let us know what you decide to do.
My System SpecsSystem Spec
08 Aug 2012   #48
silencer903

Windows 7 Home Premium 64bit
 
 

I'm terribly sorry for the late reply, I've been very busy recently.

I restored my laptop to factory new settings in an attempt to get it to cooperate, and it had mixed success. I can now do a little more work than I could, but they still are happening.

Ran MemTest again, no errors as before. I'm downloading SeaTools as this is typing.
My recent bluescreen had a specified driver: Ntfs.sys, if that is any help.
My System SpecsSystem Spec
08 Aug 2012   #49
F5ing

Windows 7 Ultimate x64
 
 

Quote   Quote: Originally Posted by silencer903 View Post
I'm terribly sorry for the late reply, I've been very busy recently.
Not to worry. No problem with responding whenever you find the time to do so.

Quote   Quote: Originally Posted by silencer903 View Post
I restored my laptop to factory new settings in an attempt to get it to cooperate, and it had mixed success. I can now do a little more work than I could, but they still are happening.

Ran MemTest again, no errors as before. I'm downloading SeaTools as this is typing.
My recent bluescreen had a specified driver: Ntfs.sys, if that is any help.
It'll be interesting to see what Seatools has to say, as NTFS is used to manage files on disk. I don't know much about dealing with BSODs, but do know that the identified error does not always accurately identify the true culprit.
My System SpecsSystem Spec
19 Aug 2012   #50
silencer903

Windows 7 Home Premium 64bit
 
 

I loaded up Seatools, ran both of the tests that you said to run and they both came back positive, no errors.

I have noticed recently that the bluescreens get out of control when my laptop is not connected to a power source (ie running off of battery power)
My System SpecsSystem Spec
Reply

 Page Fault in Nonpaged Area BSOD (Among a few others)




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
BSOD - Page fault in nonpaged area
Hi, I have common problems with BSOD. It occurs few times a day. I tried to reinstall windows but that didn't help. The most common message is "page fault in non paged area" and sometimes "the driver is mismanaging PTEs. I have windows 7 ultimate x64, AMD Athlon II X2 250 processor, NVIDIA...
BSOD Help and Support
Help with BSOD (page fault in nonpaged area)
Hi guys, I really need some help here! I left my computer running overnight and after some Windows Update it has been giving me BSOD on startup, it doesn't even get to the login page, just BSODs. On Safe Mode it works fine but It wouldn´t start with a clean boot or diagnostics boot, just BSODs...
BSOD Help and Support
BSOD page fault in nonpaged area
hi Getting page fault in nonpaged area bsod every morning, this is on a new build. If I reformat or move my ram to different slots everything is fine, play games browse etc, turn the pc on the next morning 12 hours later, laggy windows, chrome crashes repeatedly then get the bsod. Was...
BSOD Help and Support
bsod page fault in nonpaged area
hey there been looking around online as to what i can do regarding this bsod. its been happening very frequently rarely whenever it happens does it happen immediately a second time but rather after 30 minutes or so of my pc being on. ive posted the zip below; steps ive done already are cmd chkdsk,...
BSOD Help and Support
Page fault in nonpaged area (bsod)
Lately I've had a couple BSODs, both only while gaming. The games seem to freeze up and i can get no response from my pc. After a few moments i get a BSOD and it dumps physical memory and reboots. the name is 'PAGE FAULT IN NONPAGED AREA' I've uploaded the most recent minidump, can anyone tell...
BSOD Help and Support
Page fault in nonpaged area Win 7 BSOD
Hello I've posted here before about getting BSOD's nearly every month but couldn't get to what was causing them. I thought they had stopped because i hadn't any for awhile but after about 15mins of computer been on this morning, i got this BSOD as shown in topic title. I've uploaded the...
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd

All times are GMT -5. The time now is 17:19.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App