Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: BSOD after a few minutes, physical memory dump

22 Jul 2012   #1
Nieo

Windows 7 64bit
 
 
BSOD after a few minutes, physical memory dump

HI guys,

my computer gets a blue screen after an few minutes.
it crashes faster if i open a programm.

the message of the blue screen is:

a problem has been detected and windows has been shut down to prevent damage to your computer.

technical information:
*** Stop: 0x00000101 (0x0000000000000060, 0x0000000000000000, oxFFFFF880009E8180, 0x0000000000000001)


collecting data for crash dump ...
initializing disk for crash dump ...
beginning dump of physical memory.
dumping physical memory to disk 100
physical memory dump complete.



i dont know how to fix it...
hope u can help me =)


My System SpecsSystem Spec
.
22 Jul 2012   #2
richc46

Microsoft Community Contributor Award Recipient

Windows 10, Home Clean Install
 
 

Welcome
You gave me 3 BSOD reports, they were all the same.

icrosoft (R) Windows Debugger Version 6.11.0001.404 AMD64
Copyright (c) Microsoft Corporation. All rights reserved.

Loading Dump File [C:\Users\Richard\AppData\Local\Temp\Temp1_Seven Forums (2).zip\Seven Forums\072212-15625-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available
Symbol search path is: SRV*c:\symbols*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 7 Kernel Version 7601 (Service Pack 1) MP (2 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS Personal
Built by: 7601.17514.amd64fre.win7sp1_rtm.101119-1850
Machine Name:
Kernel base = 0xfffff800`02818000 PsLoadedModuleList = 0xfffff800`02a5de90
Debug session time: Sun Jul 22 12:37:53.296 2012 (GMT-4)
System Uptime: 0 days 1:34:24.062
Loading Kernel Symbols
...............................................................
................................................................
.........................
Loading User Symbols
Loading unloaded module list
......
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************
Use !analyze -v to get detailed debugging information.
BugCheck 101, {60, 0, fffff880009e8180, 1}
Probably caused by : Unknown_Image ( ANALYSIS_INCONCLUSIVE )
Followup: MachineOwner

We can try the hit and miss method, if you so desire, but the reports are of no help.
Want to try the hit or miss method?

If you want to continue, run the computer in safe mode and report, back if the problem continues
My System SpecsSystem Spec
24 Jul 2012   #3
Nieo

Windows 7 64bit
 
 

Thanks for your quick answer !

If I run the computer in safe mode there are no problems, no crash, no bluescreen...

maybe my computer needs more RAM for normal mode?! i only got 2 GB oO
My System SpecsSystem Spec
.

24 Jul 2012   #4
richc46

Microsoft Community Contributor Award Recipient

Windows 10, Home Clean Install
 
 

May be a driver
Driver Verifier
I'd suggest that you first backup your data and then make sure you've got access to another computer so you can contact us if problems arise. Then make a System Restore point (so you can restore the system using the Vista/Windows 7 Startup Repair feature).

In Windows 7 you can make a Startup Repair disk by going to Start....All Programs...Maintenance...Create a System Repair Disc - with Windows Vista you'll have to use your installation disk or the "Repair your computer" option at the top of the Safe Mode menu .

Then, here's the procedure:
- Go to Start and type in "verifier" (without the quotes) and press Enter
- Select "Create custom settings (for code developers)" and click "Next"
- Select "Select individual settings from a full list" and click "Next"
- Select everything EXCEPT FOR "Low Resource Simulation" and click "Next"
- Select "Select driver names from a list" and click "Next"
Then select all drivers NOT provided by Microsoft and click "Next"
- Select "Finish" on the next page.

Reboot the system and wait for it to crash to the Blue Screen. Continue to use your system normally, and if you know what causes the crash, do that repeatedly. The objective here is to get the system to crash because
Driver Verifier is stressing the drivers out. If it doesn't crash for you, then let it run for at least 36 hours of continuous operation (an estimate on my part).

If you can't get into Windows because it crashes too soon, try it in Safe Mode.
If you can't get into Safe Mode, try using System Restore from your installation DVD to set the system back to the previous restore point that you created.

Driver Verifier - Enable and Disable
My System SpecsSystem Spec
Reply

 BSOD after a few minutes, physical memory dump




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
BSOD followed by dump of physical memory
Hi, sorry I can't give more info as the blue screen flashes up for less than a second before restarting. It doesn't seem to happen when I'm doing any one particular thing, I could be watching netflix, listening to spotify etc. The .zip file attached came from a crash when I was running the SF...
BSOD Help and Support
BSOD Physical Memory Dump
Hello, I've recently started experiencing BSOD talking about memory dumping. It first happened a few days ago when I clicked on a java application and it crashed. It took forever to start up again, and I was having some problems with my internet disconnecting, so I reformatted hoping that would fix...
BSOD Help and Support
BSOD Physical Memory Dump
I barely know what I'm doing and I think in my frustration I may have made the problem worse. - x86 - Windows 7 Home Premium 64bit - OEM - What is the age of system (hardware): A little over a year I think. - What is the age of OS installation: Pre-installed This problem is recent and occurred...
BSOD Help and Support
BSOD - Physical Memory Dump
guys, its been about 5 days that i have been receiving physical memory dump errors.. also, this error comes atleast 5 times a day, can any1 help me find a cure or atleast know the problem! :D
BSOD Help and Support
BSOD physical memory dump
Hey posting this for a friend, not my system, sorry if I'm doing something wrong the machine is running windows 7 home starter x32 it's blue screening shortly after startup, to my knowledge no drivers have been changed and no hardware added I've included the dump file (i think), thanks for...
BSOD Help and Support
BSOD - Physical Memory Dump I Need Help!
What the thread says, i have no idea what it is, PLEASE HELP ME :cry:
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 13:37.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App