Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Daily BSOD with various stop codes 0x1e, 0x3b, 0x7e


24 Jul 2012   #1

MS Windows 7 Home Premium 64-bit SP1
 
 
Daily BSOD with various stop codes 0x1e, 0x3b, 0x7e

Hello.

I finally gave up all hope trying to solve my problem by myself.

Thing is early this year I started getting very random blue screens mostly blaming ntoskrnl, or other windows services. These blue screens didn't seem to have any real pattern and sometimes occurred when playing games either online of offline or just browsing net or being idle.

I've already replaced my motherboard, psu, ram, and gpu in order to solve this problem.
Installed windows from scratch many times plus trying windows 8 with no luck.

Programs I've used to identify cause are memtest86+, Intel BurnIn, Prime95, Furmark, And driver verifier from windows. All these came out without any errors except running driver verifier sometimes freezes my system for some seconds.

Memtest86+ I tried all combinations from both sticks on to just one, and used all mb slots with no errors in 9+ pass.

Intel Burn test and prime 95. I can leave my system run for hours and temps never rise above 52c.

Furmark. Pretty much same deal with this, both my gpu's stay in reasonable temp range and tops at 76c.

Now I noticed my system seems to be much more stable with only 1 ram stick installed. I can watch streams or play without bsod's. It doesn't matter which stick I use or in which slot. All sticks I got are listed in my motherboard site as compatible. So I'm really confused why my system can't handle 2 sticks or more.

I'm really thankful if anyone can help or point me on what to do next.

Forgot system specs -_-

MoBo: 2x asus z68-v lx
CPU: intel 2500k (no oc atm)
GPU: 2x amd 6950 2gb (club 3d coolstream edition)
RAM: 2x4gb kingston hyperx 1600 and 2x4gb kingston 1333
SSD: Corsair force 3 128gb (with latest firmware)
HDD: WD caviar green?
PSU: Silverstone strider plus 1000w and thermaltake xt 675w


My System SpecsSystem Spec
.

24 Jul 2012   #2

Windows 8.1 Pro x64
 
 

For now, give this a go:

try these:
SFC /SCANNOW Command - System File Checker

After:
Disk Check

Also try updating Realtek drivers: http://www.realtek.com.tw/downloads/...&GetDown=false
Post back results.

-Justin
My System SpecsSystem Spec
24 Jul 2012   #3

MS Windows 7 Home Premium 64-bit SP1
 
 

Ty for response

Updated network drivers from realtek.
SFC /scan did not find any errors. I ran it 2 times.
I'll leave disk check running and head to work. Will post results when I get home
My System SpecsSystem Spec
.


24 Jul 2012   #4

Windows 8.1 Pro x64
 
 

Alright sounds good!

-Justin
My System SpecsSystem Spec
24 Jul 2012   #5

 
 

Quote   Quote: Originally Posted by jCni View Post
Forgot system specs -_-



GPU: 2x amd 6950 2gb (club 3d coolstream edition)
RAM: 2x4gb kingston hyperx 1600 and 2x4gb kingston 1333

PSU: Silverstone strider plus 1000w and thermaltake xt 675w
You have two different RAM kits and two different PSU's?

Have you tried one kit by itself? ie Just the 8GB of HyperX's ?

When you swap the RAM modules around, they are set to whatever timings of th module you used last, unless you adjusted the timings in between.

Two mixed set of RAM modules are an automatic red flag. Different mhz, different timings etc. The fact that both kits are individually listed on the QVL does not mean that they will work 'mixed together'.

Start by selecting one kit and ditching the other for now. Eliminate one variable straight off.


And what is with the two differernt PSU's?

The silverstone by itself should be handle the entire load. Unless there is something you are leaving out (like a custom WC loop etc) then there really should be no need to have two PSUs.

How do you have the power distributed? ie What is powering what?


When the system started playing silly buggers (crashing), was this before or after you added extra ram or extra PSU?
My System SpecsSystem Spec
24 Jul 2012   #6

MS Windows 7 Ultimate SP1 64-bit
 
 

jCni,
Would you please fill out your system specs which travel with each and everyone of your posts?

Update your SevenForums System Specs
User CP (located on the top menu bar) |
Your Profile | Edit System Spec
(left-hand column)

To gather info, use Speccy (my favorite) or SIW or System Info

In the System Manufacturer Block, enter:
Manufacturer and Model and
ADD the word laptop, desktop, netbook or tablet.
For example:
Toshiba Satellite L305D notebook.

Provide full windows version info, for example:
MS Windows 7 Ultimate SP1 64-bit

Use the “Other Info” block for Optical Reader,
Mouse, touchpad, wifi adapter, speakers, monitor, etc

Scroll down and click on SAVE CHANGES.

You will find that in Speccy, you can select info from the display
using your mouse/touchpad and then paste that info into your specs.

SIW is a marvelous program, but the free version does not offer
this capability.
My System SpecsSystem Spec
24 Jul 2012   #7

MS Windows 7 Home Premium 64-bit SP1
 
 

Quote   Quote: Originally Posted by smarteyeball View Post
Quote   Quote: Originally Posted by jCni View Post
Forgot system specs -_-



GPU: 2x amd 6950 2gb (club 3d coolstream edition)
RAM: 2x4gb kingston hyperx 1600 and 2x4gb kingston 1333

PSU: Silverstone strider plus 1000w and thermaltake xt 675w
You have two different RAM kits and two different PSU's?

Have you tried one kit by itself? ie Just the 8GB of HyperX's ?

When you swap the RAM modules around, they are set to whatever timings of th module you used last, unless you adjusted the timings in between.

Two mixed set of RAM modules are an automatic red flag. Different mhz, different timings etc. The fact that both kits are individually listed on the QVL does not mean that they will work 'mixed together'.

Start by selecting one kit and ditching the other for now. Eliminate one variable straight off.


And what is with the two differernt PSU's?

The silverstone by itself should be handle the entire load. Unless there is something you are leaving out (like a custom WC loop etc) then there really should be no need to have two PSUs.

How do you have the power distributed? ie What is powering what?


When the system started playing silly buggers (crashing), was this before or after you added extra ram or extra PSU?
Ok so I've updated my account to include my system specs, and they should be visible now.

I've don disk error check for both ssd and hdd and it didn't find anything special. Error Check was done with ticks on "automatically fix file system..." and "Scan for and attemt to recovery..."

Also ran sfc /scannow 2 more times just to be sure.

I think my first post about my components was written in poor language or something like that. BUT I only have extra PSU and set of 1333mhz ram as a spare. So they are not inside my rig atm. Both parts are only leftovers from previous builds and since they worked then I've kept them for testing purpouses.

- Jani
My System SpecsSystem Spec
24 Jul 2012   #8

MS Windows 7 Ultimate SP1 64-bit
 
 

Would like you to run two scripts and post back the results. The first part of the scripts shows what where the results will be.

# **********************INSTRUCTIONS**************************
# STEP 1 ** RUN POWERSHELL AS ADMINISTRATOR ******************
# ************************************************************
#
# WIN key | type POWERSHELL | do NOT hit ENTER |
# in the PROGRAMS list, right-click on WINDOWS POWERSHELL |
# choose "Run as administrator" |
# Click on the YES button (if such appears)
#
# WIN key = key with Microsoft log on top
#
# for the guru:
# WIN | type POWERSHELL | CTRL+SHIFT+ENTER key combo | ALT+Y keycombo
# ************************************************************
# STEP 2 ** COPY AND PASTE ***********************************
# ************************************************************
#
# COPY the script using CTRL+C,
# COPY every line of script down thru both EXIT statements
#
# PASTE into Powershell
#----Right-Click at the PowerShell Prompt
#----(Ctrl+V does not work)
#
# Start copying with first script line without a # at start of the line
# Note: Actually, you can paste the entire file if you rather
#-------Lines starting with a # are ignored by PowerShell
# ************************************************************
# STEP 3 ** SCRIPT OUTPUT & SCRIPT PURPOSE *******************
# ************************************************************
# --The script output and purpose is given at the very front of the script
#
# --The script output and purpose is given at the very front of the script
#
# ************************************************************
# ***************** NOTE - POWERSHELL VERSION*****************
# if you receive this error msg:
#--The system can not find the path specified
# you may need to update your PowerShell
# you must be using Powershell 2.0 or later.
#
# To determine your Powershell version:
#---Run PowerShell
#---enter $host.version
#---you should see at least:
# Major Minor Build Revision
# ----- ----- ----- --------
# 2......0......-1.....-1
#
# If you do not see the above, update your Vista/Win 7.
# ************************************************************
# *************** NOTE - EXECUTION POLICY*********************
# If you haven't set the execution policy, you may need to:
#---Run PowerShell
#---enter SET-EXECUTIONPOLICY -EXECUTIONPOLICY REMOTESIGNED
# ************************************************************

Script #1:

Script:
# ***********************************************************************
# Puts COMPUTERINFO.TXT on your desktop
# COMPUTERINFO.TXT contains info about your bios and your computer system
# ***********************************************************************

function get-ID 
  
param ([string]$title, [int]$arraycnt, [int]$arrayndx
  
$id " " $title " "
  
If ($arraycnt -ne 1) {$id $id + [string]$arrayndx " "}
  
$id }
function 
get-title param ([string]$id
  
$hashes = ([int](51 $id.length)/2)
  
$hashstr '#' $hashes
  $title 
$hashstr $id $hashstr
  
If ($title.length -le 51) {$title += "#"}
  
$title  }
$sterne "*" 79
$ossys 
= @(gwmi win32_operatingsystem)
$ossyscnt $ossys.count
$ossysid 
get-id "WIN" 1 0
$dskvol 
= @(gwmi win32_volume)
$dskvolcnt $dskvol.count
$dskarr 
=@(gwmi win32_diskdrive)
$dskarrcnt $dskarr.count
$cpu 
= @(gwmi win32_processor)
$cpucnt $cpu.count
$mobo 
gwmi win32_BaseBoard
$moboid 
get-id "MOTHERBOARD" 1 0
$bootcfg 
gwmi Win32_BootConfiguration 
$bootid 
get-id "BOOT CONFIGURATION" 1 0
$Build 
gwmi Win32_WMISetting
$osid 
get-id "OS BUILD" 1 0
$CS   
gwmi Win32_ComputerSystem   
$CSprod  
gwmi Win32_ComputerSystemProduct 
$id 
get-id "BIOS" 1 0
$csid 
get-id "COMPUTER SYSTEM" 1 0
$bios 
gwmi win32_bios
$obj 
= new-object -typename PSobject
$obj 
Add-member -membertype noteproperty -name (Get-title $id ) -value $sterne -passthru |
 
add-member -membertype noteproperty -name ($id "Name") -value($bios.name) -passthru |
 
add-member -membertype noteproperty -name ($id "Manufacturer") -value($bios.manufacturer) -passthru|
 
add-member -membertype noteproperty -name ($id "Release Date") -value($bios.converttodatetime($bios.releasedate)) -passthru |
 
add-member -membertype noteproperty -name ($id "Serial Number") -value($bios.SerialNumber) -passthru |
 
Add-member -membertype noteproperty -name (Get-title $csid) -value $sterne -passthru |
 
add-member -membertype noteproperty -name ($csid "Manufacturer") -value($cs.manufacturer) -passthru |
 
add-member -membertype noteproperty -name ($csid "Model") -value($cs.model) -passthru |
 
add-member -membertype noteproperty -name ($csid "Primary Owner") -value($cs.primaryownername) -passthru |
 
add-member -membertype noteproperty -name ($csid "Type") -value($cs.systemtype) -passthru |
 
add-member -membertype noteproperty -name ($csid "Total Memory") -value(([string][int]($cs.totalphysicalmemory/1073741824) + " GB")) -passthru |
 
add-member -membertype noteproperty -name ($csid "User Name") -value($cs.username) -passthru |
 
add-member -membertype noteproperty -name ($csid "Product Name") -value($csprod.name) -passthru |
 
add-member -membertype noteproperty -name ($csid "Version") -value($csprod.version) -passthru |
 
add-member -membertype noteproperty -name ($csid "Identifying Number") -value($csprod.identifyingnumber) -passthru |
 
add-member -membertype noteproperty -name ($csid "Vendor") -value($csprod.vendor) -passthru |
 
add-member -membertype noteproperty -name ($osID +"Build version") -value($build.BuildVersion) -passthru |
 
add-member -membertype noteproperty -name ($bootid "Boot Directory") -value($bootcfg.bootdirectory) -passthru |
 
add-member -membertype noteproperty -name ($bootid "Last Drive") -value($bootcfg.lastdrive) -passthru |
 
add-member -membertype noteproperty -name ($moboID "Manufacturer") -value($mobo.manufacturer) -passthru |
 
add-member -membertype noteproperty -name ($moboid "Product Type" )     -value($mobo.product) -passthru |
 
add-member -membertype noteproperty -name ($moboid "Serial Number")  -value($mobo.serialnumber)
for (
$ndx=1$ndx -le $ossyscnt$ndx++) {
  
$d $ossys[$ndx 1]
  
$ossysid get-id "WIN" $ossyscnt $ndx
 $obj 
add-member -membertype noteproperty -name ($ossysid "Build Number") -value($d.buildnumber) -passthru |
 
add-member -membertype noteproperty -name ($ossysid "OS Version") -value($d.caption) -passthru |
 
add-member -membertype noteproperty -name ($ossysid "Country Code") -value($d.countrycode) -passthru |
## add-member -membertype noteproperty -name ($ossysid + "Service Pack") -value($d.csdversion) -passthru |
 
add-member -membertype noteproperty -name ($ossysid "Install Date") -value($d.converttodatetime($d.installdate))  -passthru |
 
add-member -membertype noteproperty -name ($ossysid "Computer System Name") -value($d.csname) -passthru |
 
add-member -membertype noteproperty -name ($ossysid "Last Bootup") -value($d.converttodatetime($d.lastbootuptime)) -passthru |
 
add-member -membertype noteproperty -name ($ossysid "OS Architecture") -value($d.osarchitecture) -passthru |
 
add-member -membertype noteproperty -name ($ossysid "Registered User") -value($d.registereduser) -passthru |
 
add-member -membertype noteproperty -name ($ossysid "Product ID") -value($d.serialnumber) -passthru |
 
add-member -membertype noteproperty -name ($ossysid "Service Pack Version") -value($d.servicepackmajorversion)
}

for (
$ndx=1$ndx -le $cpucnt$ndx++) {
  
$d $cpu[$ndx 1]
  
$cpuid get-id "CPU" $cpucnt $ndx
 $obj 
add-member -membertype noteproperty -name ($cpuid "Current Core Speed") -value([string][int]$d.currentclockspeed " MHz") -passthru |
 
add-member -membertype noteproperty -name ($cpuid "Current Voltage") -value($d.currentvoltage) -passthru |
 
add-member -membertype noteproperty -name ($cpuid "External Clock") -value($d.extclock) -passthru |
 
add-member -membertype noteproperty -name ($cpuid "Max. Clock Speed") -value([string][int]$d.maxclockspeed " MHz") -passthru |
 
add-member -membertype noteproperty -name ($cpuid "Manufacturer") -value($d.manufacturer)  -passthru |
 
add-member -membertype noteproperty -name ($cpuid "Name") -value($d.name) -passthru |
 
add-member -membertype noteproperty -name ($cpuid "Description") -value($d.description) -passthru |
 
add-member -membertype noteproperty -name ($cpuid "version") -value($d.version) -passthru |
 
add-member -membertype noteproperty -name ($cpuid "Number of Cores per CPU") -value($d.numberofcores) -passthru |
 
add-member -membertype noteproperty -name ($cpuid "Number of Logical Processors") -value($d.numberoflogicalprocessors) -passthru |
 
add-member -membertype noteproperty -name ($cpuid "Socket Designation") -value($d.socketdesignation)
}
for(
$ndx=1$ndx -le $dskarrcnt$ndx++) {
  
$d $dskarr[$ndx -1];
  
$dskarrid get-id "DISK" $dskarrcnt $ndx
  $obj 
Add-member -membertype noteproperty -name (get-title $dskarrid) -value $sterne -passthru |
   
add-member -membertype noteproperty -name ($dskarrid "Model") -value($d.model) -passthru |
   
add-member -membertype noteproperty -name ($dskarrid "Size") -value([string][int]($d.size/1073741824) + " GB") -passthru |
   
add-member -membertype noteproperty -name ($dskarrid "Status") -value($d.status) -passthru |
   
add-member -membertype noteproperty -name ($dskarrid "Capabilities") -value($d.capabilitydescriptions) -passthru |
   
add-member -membertype noteproperty -name ($dskarrid "Interface Type") -value($d.interfacetype) -passthru |
   
add-member -membertype noteproperty -name ($dskarrid "Partitions") -value($d.partitions) -passthru |
   
add-member -membertype noteproperty -name ($dskarrid "Bytespersector") -value($d.bytespersector) -passthru |
   
add-member -membertype noteproperty -name ($dskarrid "Sectors per track") -value($d.sectorspertrack) -passthru |
   
add-member -membertype noteproperty -name ($dskarrid "Firmware revision") -value($d.firmwarerevision) -passthru |
   
add-member -membertype noteproperty -name ($dskarrid "Device ID") -value($d.deviceid) -passthru |
   
add-member -membertype noteproperty -name ($dskarrid "PNP Device ID") -value($d.pnpdeviceid)
}
function 
Get-DrvType ($n) {
  switch ([
int]$n) {
   
2  {$result "Removable"}
   
3  {$result "Partition"}
   
5  {$result "CDROM"}
   default {
$result "Unknown"}
   } 
  
$result
}
for (
$ndx=1$ndx -le $dskvolcnt$ndx++) {
  
$d $dskvol[$ndx-1]
  
$dskvolid get-id "DISK VOLUME" $dskvolcnt $ndx
  $obj 
add-member -membertype noteproperty -name (get-title $dskvolid)  -value $sterne -passthru |
  
add-member -membertype noteproperty -name ($dskvolid "Caption") -value($d.caption)  -passthru |
  
add-member -membertype noteproperty -name ($dskvolid "Drive Letter") -value($d.driveletter) -passthru |
  
add-member -membertype noteproperty -name ($dskvolid "Label") -value($d.label) -passthru |
  
add-member -membertype noteproperty -name ($dskvolid "Capacity") -value([string][int]($d.capacity/1073741824) + " GB") -passthru |
  
add-member -membertype noteproperty -name ($dskvolid "Free Space") -value([string][int]($d.freespace/1073741824) + " GB") -passthru |
  
add-member -membertype noteproperty -name ($dskvolid "Volume Type") -value(get-drvtype($d.drivetype)) -passthru |
  
add-member -membertype noteproperty -name ($dskvolid "Boot Volume") -value($d.bootvolume) -passthru |
  
add-member -membertype noteproperty -name ($dskvolid "System Volume") -value($d.systemvolume) -passthru |
  
add-member -membertype noteproperty -name ($dskvolid "Compressed") -value($d.compressed) -passthru |
  
add-member -membertype noteproperty -name ($dskvolid "Serial Number") -value($d.serialnumber) -passthru |
#  add-member -membertype noteproperty -name ($dskvolid + "Device ID") -value($d.deviceid) -passthru |
  
add-member -membertype noteproperty -name ($dskvolid "File System") -value($d.filesystem) -passthru |
  
add-member -membertype noteproperty -name ($dskvolid "Block Size") -value($d.blocksize) -passthru |
  
add-member -membertype noteproperty -name ($dskvolid "Indexing Enabled") -value($d.indexingenabled) -passthru |
  
add-member -membertype noteproperty -name ($dskvolid "Auto Mount") -value($d.automount) -passthru |
  
add-member -membertype noteproperty -name ($dskvolid "Dirty Bit Set") -value($d.dirtybitset)
}
$PhyMemArray = @(gwmi win32_PhysicalMemoryArray)
$cnt $phymemarray.count
for ($ndx=1$ndx -le $cnt$ndx++) {
  
$d $phymemarray[$ndx -1]
  
$id get-id "PHYSICAL MEMORY ARRAY" $cnt $ndx
  $obj 
add-member -membertype noteproperty -name Get-title $Id ) -value $sterne
  $obj 
add-member -membertype noteproperty -name (" Maximum Memory Capacity") -value([string][int]($d.maxcapacity/1048576) + " GB")
  
$obj add-member -membertype noteproperty -name (" Number of Memory Devices") -value($d.memorydevices)
}
$arr = @(gwmi win32_PhysicalMemory)
$cnt $arr.count
for($i=1$i -le $cnt$i++){
  
$d $arr[$i-1]
  
$id get-id "PHYSICAL MEMORY" $cnt $i
  $obj 
add-member -membertype noteproperty -name (get-title $id) -value $sterne
  $obj 
add-member -membertype noteproperty -name ($id "Bank Label") -value($d.banklabel)
  
$obj add-member -membertype noteproperty -name ($id "Capacity") -value([string][int]($d.capacity/1073741824) + " GB")
  
$obj add-member -membertype noteproperty -name ($id "Data Width") -value($d.datawidth)
  
$obj add-member -membertype noteproperty -name ($id "Speed") -value($d.speed)
  
$obj add-member -membertype noteproperty -name ($id "Description") -value($d.description)
  
$obj add-member -membertype noteproperty -name ($id "Tag") -value($d.tag)
  
$obj add-member -membertype noteproperty -name ($id "Device Locator") -value($d.devicelocator)
  
$obj add-member -membertype noteproperty -name ($id "Manufacturer") -value($d.manufacturer)
  
$obj add-member -membertype noteproperty -name ($id "Part Number") -value($d.partnumber)
  
$obj add-member -membertype noteproperty -name ($id "Serial Number") -value($d.serialnumber)
}
$Arr = @(gwmi win32_cachememory)
$cnt $arr.count
for($i=1$i -le $cnt$i++){
  
$d $arr[$i-1];
  
$id get-id "CACHE MEMORY" $cnt $i
  $obj 
add-member -membertype noteproperty -name (get-title $id) -value $sterne
  $obj 
add-member -membertype noteproperty -name ($id "Name") -value($d.name)
  
$obj add-member -membertype noteproperty -name ($id "Device ID") -value($d.deviceid)
  
$obj add-member -membertype noteproperty -name ($id "Purpose") -value($d.purpose)
  
$obj add-member -membertype noteproperty -name ($id "Block Size") -value($d.blocksize)
  
$obj add-member -membertype noteproperty -name ($id "Installed Size") -value($d.installedsize)
  
$obj add-member -membertype noteproperty -name ($id "Max Cache Size") -value($d.maxcachesize)
  
$obj add-member -membertype noteproperty -name ($id "Number of Blocks") -value($d.numberofblocks)
  
$obj add-member -membertype noteproperty -name ($id "Status") -value($d.status)
}
$Arr = @(gwmi win32_memoryarray)
$cnt $arr.count
for($i=1$i -le $cnt$i++){
  
$d $arr[$i-1];
  
$id get-id "MEMORY ARRAY" $CNT $I
  $obj 
add-member -membertype noteproperty -name (get-title $id) -value $sterne
  $obj 
add-member -membertype noteproperty -name ($id "Description") -value($d.description)
  
$obj add-member -membertype noteproperty -name ($id "Device ID") -value($d.deviceid)
  
$obj add-member -membertype noteproperty -name ($id "Starting Address") -value($d.startingaddress)
  
$obj add-member -membertype noteproperty -name ($id "Ending Address") -value($d.endingaddress)
}
$Arr = @(gwmi win32_memorydevice)
$cnt $arr.count
for($i=1$i -le $cnt$i++){
  
$d $arr[$i-1];
  
$id get-id "MEMORY DEVICE" $cnd $i
  $obj 
add-member -membertype noteproperty -name (get-title $id) -value $sterne
  $obj 
add-member -membertype noteproperty -name ($id "Description") -value($d.description)
  
$obj add-member -membertype noteproperty -name ($id "Device ID") -value($d.deviceid)
  
$obj add-member -membertype noteproperty -name ($id "Starting Address") -value($d.startingaddress)
  
$obj add-member -membertype noteproperty -name ($id "Ending Address") -value($d.endingaddress)
}
$obj  $env:userprofile\desktop\COMPUTERINFO.TXT

EXIT
EXIT 
==============================================
============================================
Script #2.

Script:
# ***********************************************
# OUTPUT: MemInfo.TXT file on your desktop
# contains info about your memory
# ***********************************************

function get-ID 
  
param ([string]$title, [int]$arraycnt, [int]$arrayndx
  
$id " " $title " "
  
If ($arraycnt -ne 1) {$id $id + [string]$arrayndx " "}
  
$id }
function 
get-title param ([string]$id
  
$hashes = ([int](51 $id.length)/2)
  
$hashstr '#' $hashes
  $title 
$hashstr $id $hashstr
  
If ($title.length -le 51) {$title += "#"}
  
$title  }
$sterne "*" 79
$obj 
= New-Object PSObject
$os 
gwmi win32_operatingsystem
$id 
get-id "OS" 1 0

$PhyMemArray 
= @(gwmi win32_PhysicalMemoryArray)
$cnt $phymemarray.count
for ($ndx=1$ndx -le $cnt$ndx++) {
  
$d $phymemarray[$ndx -1]
  
$id get-id "PHYSICAL MEMORY ARRAY" $cnt $ndx
  $obj 
add-member -membertype noteproperty -name Get-title $Id ) -value $sterne
  $obj 
add-member -membertype noteproperty -name (" Maximum Memory Capacity") -value([string][int]($d.maxcapacity/1048576) + " GB")
  
$obj add-member -membertype noteproperty -name (" Number of Memory Devices") -value($d.memorydevices)
}

$arr = @(gwmi win32_PhysicalMemory)
$cnt $arr.count
for($i=1$i -le $cnt$i++){
  
$d $arr[$i-1]
  
$id get-id "PHYSICAL MEMORY" $cnt $i
  $obj 
add-member -membertype noteproperty -name (get-title $id) -value $sterne
  $obj 
add-member -membertype noteproperty -name ($id "Bank Label") -value($d.banklabel)
#  $obj | add-member -membertype noteproperty -name ($id + "Tag") -value($d.tag)
  
$obj add-member -membertype noteproperty -name ($id "Manufacturer") -value($d.manufacturer)
  
$obj add-member -membertype noteproperty -name ($id "Part Number") -value($d.partnumber)
  
$obj add-member -membertype noteproperty -name ($id "Serial Number") -value($d.serialnumber)
  
$obj add-member -membertype noteproperty -name ($id "Capacity") -value([string][int]($d.capacity/1073741824) + " GB")
  
$obj add-member -membertype noteproperty -name ($id "Device Locator") -value($d.devicelocator)
  
$obj add-member -membertype noteproperty -name ($id "Data Width") -value($d.datawidth)
  
$obj add-member -membertype noteproperty -name ($id "Speed") -value($d.speed)
}

$Arr = @(gwmi win32_memoryarray)
$cnt $arr.count
for($i=1$i -le $cnt$i++){
  
$d $arr[$i-1];
  
$id get-id "MEMORY ARRAY" $CNT $I
  $obj 
add-member -membertype noteproperty -name (get-title $id) -value $sterne
  $obj 
add-member -membertype noteproperty -name ($id "Device ID") -value($d.deviceid)
  
$obj add-member -membertype noteproperty -name ($id "Starting Address") -value($d.startingaddress)
  
$obj add-member -membertype noteproperty -name ($id "Ending Address") -value($d.endingaddress)
}

$Arr = @(gwmi win32_memorydevice)
$cnt $arr.count
for($i=1$i -le $cnt$i++){
  
$d $arr[$i-1];
  
$id get-id "MEMORY DEVICE" $cnd $i
  $obj 
add-member -membertype noteproperty -name (get-title $id) -value $sterne
#  $obj | add-member -membertype noteproperty -name ($id + "Device ID") -value($d.deviceid)
  
$obj add-member -membertype noteproperty -name ($id "Starting Address") -value($d.startingaddress)
  
$obj add-member -membertype noteproperty -name ($id "Ending Address") -value($d.endingaddress)
}
$obj $env:userprofile\desktop\MemInfo.txt

EXIT
EXIT 
My System SpecsSystem Spec
24 Jul 2012   #9

MS Windows 7 Home Premium 64-bit SP1
 
 

Quote   Quote: Originally Posted by karlsnooks View Post
Would like you to run two scripts and post back the results. The first part of the scripts shows what where the results will be.

# **********************INSTRUCTIONS**************************
# STEP 1 ** RUN POWERSHELL AS ADMINISTRATOR ******************
# ************************************************************
#
# WIN key | type POWERSHELL | do NOT hit ENTER |
# in the PROGRAMS list, right-click on WINDOWS POWERSHELL |
# choose "Run as administrator" |
# Click on the YES button (if such appears)
#
# WIN key = key with Microsoft log on top
#
# for the guru:
# WIN | type POWERSHELL | CTRL+SHIFT+ENTER key combo | ALT+Y keycombo
# ************************************************************
# STEP 2 ** COPY AND PASTE ***********************************
# ************************************************************
#
# COPY the script using CTRL+C,
# COPY every line of script down thru both EXIT statements
#
# PASTE into Powershell
#----Right-Click at the PowerShell Prompt
#----(Ctrl+V does not work)
#
# Start copying with first script line without a # at start of the line
# Note: Actually, you can paste the entire file if you rather
#-------Lines starting with a # are ignored by PowerShell
# ************************************************************
# STEP 3 ** SCRIPT OUTPUT & SCRIPT PURPOSE *******************
# ************************************************************
# --The script output and purpose is given at the very front of the script
#
# --The script output and purpose is given at the very front of the script
#
# ************************************************************
# ***************** NOTE - POWERSHELL VERSION*****************
# if you receive this error msg:
#--The system can not find the path specified
# you may need to update your PowerShell
# you must be using Powershell 2.0 or later.
#
# To determine your Powershell version:
#---Run PowerShell
#---enter $host.version
#---you should see at least:
# Major Minor Build Revision
# ----- ----- ----- --------
# 2......0......-1.....-1
#
# If you do not see the above, update your Vista/Win 7.
# ************************************************************
# *************** NOTE - EXECUTION POLICY*********************
# If you haven't set the execution policy, you may need to:
#---Run PowerShell
#---enter SET-EXECUTIONPOLICY -EXECUTIONPOLICY REMOTESIGNED
# ************************************************************

Script #1:

Script:
# ***********************************************************************
# Puts COMPUTERINFO.TXT on your desktop
# COMPUTERINFO.TXT contains info about your bios and your computer system
# ***********************************************************************

function get-ID 
  
param ([string]$title, [int]$arraycnt, [int]$arrayndx
  
$id " " $title " "
  
If ($arraycnt -ne 1) {$id $id + [string]$arrayndx " "}
  
$id }
function 
get-title param ([string]$id
  
$hashes = ([int](51 $id.length)/2)
  
$hashstr '#' $hashes
  $title 
$hashstr $id $hashstr
  
If ($title.length -le 51) {$title += "#"}
  
$title  }
$sterne "*" 79
$ossys 
= @(gwmi win32_operatingsystem)
$ossyscnt $ossys.count
$ossysid 
get-id "WIN" 1 0
$dskvol 
= @(gwmi win32_volume)
$dskvolcnt $dskvol.count
$dskarr 
=@(gwmi win32_diskdrive)
$dskarrcnt $dskarr.count
$cpu 
= @(gwmi win32_processor)
$cpucnt $cpu.count
$mobo 
gwmi win32_BaseBoard
$moboid 
get-id "MOTHERBOARD" 1 0
$bootcfg 
gwmi Win32_BootConfiguration 
$bootid 
get-id "BOOT CONFIGURATION" 1 0
$Build 
gwmi Win32_WMISetting
$osid 
get-id "OS BUILD" 1 0
$CS   
gwmi Win32_ComputerSystem   
$CSprod  
gwmi Win32_ComputerSystemProduct 
$id 
get-id "BIOS" 1 0
$csid 
get-id "COMPUTER SYSTEM" 1 0
$bios 
gwmi win32_bios
$obj 
= new-object -typename PSobject
$obj 
Add-member -membertype noteproperty -name (Get-title $id ) -value $sterne -passthru |
 
add-member -membertype noteproperty -name ($id "Name") -value($bios.name) -passthru |
 
add-member -membertype noteproperty -name ($id "Manufacturer") -value($bios.manufacturer) -passthru|
 
add-member -membertype noteproperty -name ($id "Release Date") -value($bios.converttodatetime($bios.releasedate)) -passthru |
 
add-member -membertype noteproperty -name ($id "Serial Number") -value($bios.SerialNumber) -passthru |
 
Add-member -membertype noteproperty -name (Get-title $csid) -value $sterne -passthru |
 
add-member -membertype noteproperty -name ($csid "Manufacturer") -value($cs.manufacturer) -passthru |
 
add-member -membertype noteproperty -name ($csid "Model") -value($cs.model) -passthru |
 
add-member -membertype noteproperty -name ($csid "Primary Owner") -value($cs.primaryownername) -passthru |
 
add-member -membertype noteproperty -name ($csid "Type") -value($cs.systemtype) -passthru |
 
add-member -membertype noteproperty -name ($csid "Total Memory") -value(([string][int]($cs.totalphysicalmemory/1073741824) + " GB")) -passthru |
 
add-member -membertype noteproperty -name ($csid "User Name") -value($cs.username) -passthru |
 
add-member -membertype noteproperty -name ($csid "Product Name") -value($csprod.name) -passthru |
 
add-member -membertype noteproperty -name ($csid "Version") -value($csprod.version) -passthru |
 
add-member -membertype noteproperty -name ($csid "Identifying Number") -value($csprod.identifyingnumber) -passthru |
 
add-member -membertype noteproperty -name ($csid "Vendor") -value($csprod.vendor) -passthru |
 
add-member -membertype noteproperty -name ($osID +"Build version") -value($build.BuildVersion) -passthru |
 
add-member -membertype noteproperty -name ($bootid "Boot Directory") -value($bootcfg.bootdirectory) -passthru |
 
add-member -membertype noteproperty -name ($bootid "Last Drive") -value($bootcfg.lastdrive) -passthru |
 
add-member -membertype noteproperty -name ($moboID "Manufacturer") -value($mobo.manufacturer) -passthru |
 
add-member -membertype noteproperty -name ($moboid "Product Type" )     -value($mobo.product) -passthru |
 
add-member -membertype noteproperty -name ($moboid "Serial Number")  -value($mobo.serialnumber)
for (
$ndx=1$ndx -le $ossyscnt$ndx++) {
  
$d $ossys[$ndx 1]
  
$ossysid get-id "WIN" $ossyscnt $ndx
 $obj 
add-member -membertype noteproperty -name ($ossysid "Build Number") -value($d.buildnumber) -passthru |
 
add-member -membertype noteproperty -name ($ossysid "OS Version") -value($d.caption) -passthru |
 
add-member -membertype noteproperty -name ($ossysid "Country Code") -value($d.countrycode) -passthru |
## add-member -membertype noteproperty -name ($ossysid + "Service Pack") -value($d.csdversion) -passthru |
 
add-member -membertype noteproperty -name ($ossysid "Install Date") -value($d.converttodatetime($d.installdate))  -passthru |
 
add-member -membertype noteproperty -name ($ossysid "Computer System Name") -value($d.csname) -passthru |
 
add-member -membertype noteproperty -name ($ossysid "Last Bootup") -value($d.converttodatetime($d.lastbootuptime)) -passthru |
 
add-member -membertype noteproperty -name ($ossysid "OS Architecture") -value($d.osarchitecture) -passthru |
 
add-member -membertype noteproperty -name ($ossysid "Registered User") -value($d.registereduser) -passthru |
 
add-member -membertype noteproperty -name ($ossysid "Product ID") -value($d.serialnumber) -passthru |
 
add-member -membertype noteproperty -name ($ossysid "Service Pack Version") -value($d.servicepackmajorversion)
}

for (
$ndx=1$ndx -le $cpucnt$ndx++) {
  
$d $cpu[$ndx 1]
  
$cpuid get-id "CPU" $cpucnt $ndx
 $obj 
add-member -membertype noteproperty -name ($cpuid "Current Core Speed") -value([string][int]$d.currentclockspeed " MHz") -passthru |
 
add-member -membertype noteproperty -name ($cpuid "Current Voltage") -value($d.currentvoltage) -passthru |
 
add-member -membertype noteproperty -name ($cpuid "External Clock") -value($d.extclock) -passthru |
 
add-member -membertype noteproperty -name ($cpuid "Max. Clock Speed") -value([string][int]$d.maxclockspeed " MHz") -passthru |
 
add-member -membertype noteproperty -name ($cpuid "Manufacturer") -value($d.manufacturer)  -passthru |
 
add-member -membertype noteproperty -name ($cpuid "Name") -value($d.name) -passthru |
 
add-member -membertype noteproperty -name ($cpuid "Description") -value($d.description) -passthru |
 
add-member -membertype noteproperty -name ($cpuid "version") -value($d.version) -passthru |
 
add-member -membertype noteproperty -name ($cpuid "Number of Cores per CPU") -value($d.numberofcores) -passthru |
 
add-member -membertype noteproperty -name ($cpuid "Number of Logical Processors") -value($d.numberoflogicalprocessors) -passthru |
 
add-member -membertype noteproperty -name ($cpuid "Socket Designation") -value($d.socketdesignation)
}
for(
$ndx=1$ndx -le $dskarrcnt$ndx++) {
  
$d $dskarr[$ndx -1];
  
$dskarrid get-id "DISK" $dskarrcnt $ndx
  $obj 
Add-member -membertype noteproperty -name (get-title $dskarrid) -value $sterne -passthru |
   
add-member -membertype noteproperty -name ($dskarrid "Model") -value($d.model) -passthru |
   
add-member -membertype noteproperty -name ($dskarrid "Size") -value([string][int]($d.size/1073741824) + " GB") -passthru |
   
add-member -membertype noteproperty -name ($dskarrid "Status") -value($d.status) -passthru |
   
add-member -membertype noteproperty -name ($dskarrid "Capabilities") -value($d.capabilitydescriptions) -passthru |
   
add-member -membertype noteproperty -name ($dskarrid "Interface Type") -value($d.interfacetype) -passthru |
   
add-member -membertype noteproperty -name ($dskarrid "Partitions") -value($d.partitions) -passthru |
   
add-member -membertype noteproperty -name ($dskarrid "Bytespersector") -value($d.bytespersector) -passthru |
   
add-member -membertype noteproperty -name ($dskarrid "Sectors per track") -value($d.sectorspertrack) -passthru |
   
add-member -membertype noteproperty -name ($dskarrid "Firmware revision") -value($d.firmwarerevision) -passthru |
   
add-member -membertype noteproperty -name ($dskarrid "Device ID") -value($d.deviceid) -passthru |
   
add-member -membertype noteproperty -name ($dskarrid "PNP Device ID") -value($d.pnpdeviceid)
}
function 
Get-DrvType ($n) {
  switch ([
int]$n) {
   
2  {$result "Removable"}
   
3  {$result "Partition"}
   
5  {$result "CDROM"}
   default {
$result "Unknown"}
   } 
  
$result
}
for (
$ndx=1$ndx -le $dskvolcnt$ndx++) {
  
$d $dskvol[$ndx-1]
  
$dskvolid get-id "DISK VOLUME" $dskvolcnt $ndx
  $obj 
add-member -membertype noteproperty -name (get-title $dskvolid)  -value $sterne -passthru |
  
add-member -membertype noteproperty -name ($dskvolid "Caption") -value($d.caption)  -passthru |
  
add-member -membertype noteproperty -name ($dskvolid "Drive Letter") -value($d.driveletter) -passthru |
  
add-member -membertype noteproperty -name ($dskvolid "Label") -value($d.label) -passthru |
  
add-member -membertype noteproperty -name ($dskvolid "Capacity") -value([string][int]($d.capacity/1073741824) + " GB") -passthru |
  
add-member -membertype noteproperty -name ($dskvolid "Free Space") -value([string][int]($d.freespace/1073741824) + " GB") -passthru |
  
add-member -membertype noteproperty -name ($dskvolid "Volume Type") -value(get-drvtype($d.drivetype)) -passthru |
  
add-member -membertype noteproperty -name ($dskvolid "Boot Volume") -value($d.bootvolume) -passthru |
  
add-member -membertype noteproperty -name ($dskvolid "System Volume") -value($d.systemvolume) -passthru |
  
add-member -membertype noteproperty -name ($dskvolid "Compressed") -value($d.compressed) -passthru |
  
add-member -membertype noteproperty -name ($dskvolid "Serial Number") -value($d.serialnumber) -passthru |
#  add-member -membertype noteproperty -name ($dskvolid + "Device ID") -value($d.deviceid) -passthru |
  
add-member -membertype noteproperty -name ($dskvolid "File System") -value($d.filesystem) -passthru |
  
add-member -membertype noteproperty -name ($dskvolid "Block Size") -value($d.blocksize) -passthru |
  
add-member -membertype noteproperty -name ($dskvolid "Indexing Enabled") -value($d.indexingenabled) -passthru |
  
add-member -membertype noteproperty -name ($dskvolid "Auto Mount") -value($d.automount) -passthru |
  
add-member -membertype noteproperty -name ($dskvolid "Dirty Bit Set") -value($d.dirtybitset)
}
$PhyMemArray = @(gwmi win32_PhysicalMemoryArray)
$cnt $phymemarray.count
for ($ndx=1$ndx -le $cnt$ndx++) {
  
$d $phymemarray[$ndx -1]
  
$id get-id "PHYSICAL MEMORY ARRAY" $cnt $ndx
  $obj 
add-member -membertype noteproperty -name Get-title $Id ) -value $sterne
  $obj 
add-member -membertype noteproperty -name (" Maximum Memory Capacity") -value([string][int]($d.maxcapacity/1048576) + " GB")
  
$obj add-member -membertype noteproperty -name (" Number of Memory Devices") -value($d.memorydevices)
}
$arr = @(gwmi win32_PhysicalMemory)
$cnt $arr.count
for($i=1$i -le $cnt$i++){
  
$d $arr[$i-1]
  
$id get-id "PHYSICAL MEMORY" $cnt $i
  $obj 
add-member -membertype noteproperty -name (get-title $id) -value $sterne
  $obj 
add-member -membertype noteproperty -name ($id "Bank Label") -value($d.banklabel)
  
$obj add-member -membertype noteproperty -name ($id "Capacity") -value([string][int]($d.capacity/1073741824) + " GB")
  
$obj add-member -membertype noteproperty -name ($id "Data Width") -value($d.datawidth)
  
$obj add-member -membertype noteproperty -name ($id "Speed") -value($d.speed)
  
$obj add-member -membertype noteproperty -name ($id "Description") -value($d.description)
  
$obj add-member -membertype noteproperty -name ($id "Tag") -value($d.tag)
  
$obj add-member -membertype noteproperty -name ($id "Device Locator") -value($d.devicelocator)
  
$obj add-member -membertype noteproperty -name ($id "Manufacturer") -value($d.manufacturer)
  
$obj add-member -membertype noteproperty -name ($id "Part Number") -value($d.partnumber)
  
$obj add-member -membertype noteproperty -name ($id "Serial Number") -value($d.serialnumber)
}
$Arr = @(gwmi win32_cachememory)
$cnt $arr.count
for($i=1$i -le $cnt$i++){
  
$d $arr[$i-1];
  
$id get-id "CACHE MEMORY" $cnt $i
  $obj 
add-member -membertype noteproperty -name (get-title $id) -value $sterne
  $obj 
add-member -membertype noteproperty -name ($id "Name") -value($d.name)
  
$obj add-member -membertype noteproperty -name ($id "Device ID") -value($d.deviceid)
  
$obj add-member -membertype noteproperty -name ($id "Purpose") -value($d.purpose)
  
$obj add-member -membertype noteproperty -name ($id "Block Size") -value($d.blocksize)
  
$obj add-member -membertype noteproperty -name ($id "Installed Size") -value($d.installedsize)
  
$obj add-member -membertype noteproperty -name ($id "Max Cache Size") -value($d.maxcachesize)
  
$obj add-member -membertype noteproperty -name ($id "Number of Blocks") -value($d.numberofblocks)
  
$obj add-member -membertype noteproperty -name ($id "Status") -value($d.status)
}
$Arr = @(gwmi win32_memoryarray)
$cnt $arr.count
for($i=1$i -le $cnt$i++){
  
$d $arr[$i-1];
  
$id get-id "MEMORY ARRAY" $CNT $I
  $obj 
add-member -membertype noteproperty -name (get-title $id) -value $sterne
  $obj 
add-member -membertype noteproperty -name ($id "Description") -value($d.description)
  
$obj add-member -membertype noteproperty -name ($id "Device ID") -value($d.deviceid)
  
$obj add-member -membertype noteproperty -name ($id "Starting Address") -value($d.startingaddress)
  
$obj add-member -membertype noteproperty -name ($id "Ending Address") -value($d.endingaddress)
}
$Arr = @(gwmi win32_memorydevice)
$cnt $arr.count
for($i=1$i -le $cnt$i++){
  
$d $arr[$i-1];
  
$id get-id "MEMORY DEVICE" $cnd $i
  $obj 
add-member -membertype noteproperty -name (get-title $id) -value $sterne
  $obj 
add-member -membertype noteproperty -name ($id "Description") -value($d.description)
  
$obj add-member -membertype noteproperty -name ($id "Device ID") -value($d.deviceid)
  
$obj add-member -membertype noteproperty -name ($id "Starting Address") -value($d.startingaddress)
  
$obj add-member -membertype noteproperty -name ($id "Ending Address") -value($d.endingaddress)
}
$obj  $env:userprofile\desktop\COMPUTERINFO.TXT

EXIT
EXIT 
==============================================
============================================
Script #2.

Script:
# ***********************************************
# OUTPUT: MemInfo.TXT file on your desktop
# contains info about your memory
# ***********************************************

function get-ID 
  
param ([string]$title, [int]$arraycnt, [int]$arrayndx
  
$id " " $title " "
  
If ($arraycnt -ne 1) {$id $id + [string]$arrayndx " "}
  
$id }
function 
get-title param ([string]$id
  
$hashes = ([int](51 $id.length)/2)
  
$hashstr '#' $hashes
  $title 
$hashstr $id $hashstr
  
If ($title.length -le 51) {$title += "#"}
  
$title  }
$sterne "*" 79
$obj 
= New-Object PSObject
$os 
gwmi win32_operatingsystem
$id 
get-id "OS" 1 0

$PhyMemArray 
= @(gwmi win32_PhysicalMemoryArray)
$cnt $phymemarray.count
for ($ndx=1$ndx -le $cnt$ndx++) {
  
$d $phymemarray[$ndx -1]
  
$id get-id "PHYSICAL MEMORY ARRAY" $cnt $ndx
  $obj 
add-member -membertype noteproperty -name Get-title $Id ) -value $sterne
  $obj 
add-member -membertype noteproperty -name (" Maximum Memory Capacity") -value([string][int]($d.maxcapacity/1048576) + " GB")
  
$obj add-member -membertype noteproperty -name (" Number of Memory Devices") -value($d.memorydevices)
}

$arr = @(gwmi win32_PhysicalMemory)
$cnt $arr.count
for($i=1$i -le $cnt$i++){
  
$d $arr[$i-1]
  
$id get-id "PHYSICAL MEMORY" $cnt $i
  $obj 
add-member -membertype noteproperty -name (get-title $id) -value $sterne
  $obj 
add-member -membertype noteproperty -name ($id "Bank Label") -value($d.banklabel)
#  $obj | add-member -membertype noteproperty -name ($id + "Tag") -value($d.tag)
  
$obj add-member -membertype noteproperty -name ($id "Manufacturer") -value($d.manufacturer)
  
$obj add-member -membertype noteproperty -name ($id "Part Number") -value($d.partnumber)
  
$obj add-member -membertype noteproperty -name ($id "Serial Number") -value($d.serialnumber)
  
$obj add-member -membertype noteproperty -name ($id "Capacity") -value([string][int]($d.capacity/1073741824) + " GB")
  
$obj add-member -membertype noteproperty -name ($id "Device Locator") -value($d.devicelocator)
  
$obj add-member -membertype noteproperty -name ($id "Data Width") -value($d.datawidth)
  
$obj add-member -membertype noteproperty -name ($id "Speed") -value($d.speed)
}

$Arr = @(gwmi win32_memoryarray)
$cnt $arr.count
for($i=1$i -le $cnt$i++){
  
$d $arr[$i-1];
  
$id get-id "MEMORY ARRAY" $CNT $I
  $obj 
add-member -membertype noteproperty -name (get-title $id) -value $sterne
  $obj 
add-member -membertype noteproperty -name ($id "Device ID") -value($d.deviceid)
  
$obj add-member -membertype noteproperty -name ($id "Starting Address") -value($d.startingaddress)
  
$obj add-member -membertype noteproperty -name ($id "Ending Address") -value($d.endingaddress)
}

$Arr = @(gwmi win32_memorydevice)
$cnt $arr.count
for($i=1$i -le $cnt$i++){
  
$d $arr[$i-1];
  
$id get-id "MEMORY DEVICE" $cnd $i
  $obj 
add-member -membertype noteproperty -name (get-title $id) -value $sterne
#  $obj | add-member -membertype noteproperty -name ($id + "Device ID") -value($d.deviceid)
  
$obj add-member -membertype noteproperty -name ($id "Starting Address") -value($d.startingaddress)
  
$obj add-member -membertype noteproperty -name ($id "Ending Address") -value($d.endingaddress)
}
$obj $env:userprofile\desktop\MemInfo.txt

EXIT
EXIT 
Hi

Got one bsod right after I pasted first script and it seems to blame tcpip.
After reboot I ran second script and nothing happened.
Got somewhat distracted by step 3. was I suppose to do something?

EDIT: Oh didn't notice these scripts actually made some text files. So those are now attached.

Dump for this crash is attached.
My System SpecsSystem Spec
24 Jul 2012   #10

MS Windows 7 Ultimate SP1 64-bit
 
 

run script #1.
A TXT file is generated.
Do not RAR that txt file.

Attach that txt file to your next post

When finished with that,
then run script #2, attach resulting TXT file to your next post.
My System SpecsSystem Spec
Reply

 Daily BSOD with various stop codes 0x1e, 0x3b, 0x7e




Thread Tools



Similar help and support threads for2: Daily BSOD with various stop codes 0x1e, 0x3b, 0x7e
Thread Forum
BSOD 0x3B / 0x1E @ ntoskml.exe during gaming BSOD Help and Support
BSOD with varying stop codes daily BSOD Help and Support
Solved BSOD at random intervals, primarily 0x1e, 0x3b and 0x7e BSOD Help and Support
Solved BSOD(0x124, 0x7E, 0x1E) and Hard Freezes BSOD Help and Support
Random BSOD, 0x50, 0xd1 0x7e, 0x3b BSOD Help and Support
BSOD STOP: 0x3B atikmdag.sys/STOP: 0x7E dxgmms1.sys BSOD Help and Support
New installation - Win 7 (64 bit) - BSOD 0xa, 0x3b, 0x1e, etc BSOD Help and Support

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd

All times are GMT -5. The time now is 07:37 AM.
Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App
  

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33