Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.



Windows 7: BSOD/ Post login System Hang/ Explorer.exe Crash

25 Jul 2012   #1

7 ultimate 64x
 
 
BSOD/ Post login System Hang/ Explorer.exe Crash

Hey, New here, had this problem for quite a while (been using Windows 7 for over a year with this hardware setup.)

Well so basically, a few weeks after a fresh install (reformat every 3-4 months usually just a personal preference), it starts to hang after logging in. It happens anywhere from 10-45 seconds after entering my password. I don't have much of anything on start-up because I prefer to have it start-up and choose which programs I want to run when..well you get the picture, anyways. So it hangs occasionally, not every time, I would say probably 30-40% of the time. Well recently it crashed, gave me the BSOD. I have the crash dump file I'll attach here. From what it looks like to me, it has something partially to do with my processor. Maybe my chipset, i'm not sure, which is why I'm posting here. I feel like both these problems are related. I'll also include the events the day of it BSOD. If you need more information let me know.

System Information:
Asus m4n98td EVO mobo
AMD Phenom II 955be (not overclocked)
8gb ram Corsair XMS3 1333mhz dual channel
Asus nVidia ENGTX 560ti 1gb OC edition
Western Digital Blue 320gb hdd
Western Digital Green 500gb hdd


Now, tbh, I'm just plain puzzled at this point, it never BSOD before, I did lose power the other day, but I ran all the hdd, ram, cpu, vga integrity tests i have and they all ran through fine. Its about time for a reformat, but I would like to see if I can solve this problem.

Thank you for looking, I appreciate whatever feedback you can offer.
Lloyd

My System SpecsSystem Spec
.

25 Jul 2012   #2

7 ultimate 64x
 
 

....no one?
My System SpecsSystem Spec
26 Jul 2012   #3

7 ultimate 64x
 
 

Bump

Reformatted. Nothing installed but drivers, and it BSOD of death again.

Bugcheck error 0x00000050

From what I can find it seems to be a hardware error, specifically with either my ram or my hard drive. I ran Memtest and chkdsk already.

Help would greatly appreciated.
My System SpecsSystem Spec
.


27 Jul 2012   #4

7 ultimate 64x
 
 

Did it again, heres the minidump...had the same bugcheck error in event viewer ie --> 0x00000050
My System SpecsSystem Spec
27 Jul 2012   #5

Microsoft Community Contributor Award Recipient

Windows 7 Home Premium SP1, clean install, upgrade disc
 
 

Sorry for the delay
We are very busy and may have fallen behind. You have error code 50, probably memory
Guide to using Memtest86+ - Geeks to Go Forums
Test your memory
I would test it again, for 8 passes and then test each stick for 6 passes.
My System SpecsSystem Spec
27 Jul 2012   #6

7 ultimate 64x
 
 

okay, well I ran it on all 4 at once, it amassed something like 2000000 errors and then stalled. Wouldnt complete one pass, so I just went and ran 2 passes on the first stick I tested alone and passed with no errors, then I went to the next stick, and it stalled at like 300000 errors, and wouldnt complete a pass. the rest of the sticks ran fine. I took a working stick and ran it through slot 2 and it passed fine. So I'm determining that stick 2 is dead since I doubt that it can be repaired. Unless theres a way I'll just run with 3 sticks until I can upgrade my ram
My System SpecsSystem Spec
27 Jul 2012   #7

Microsoft Community Contributor Award Recipient

Windows 7 Home Premium SP1, clean install, upgrade disc
 
 

Well, anyway we found the cause of the BSODs. Any further questions just post.
When you buy the ram, dont just buy what you need, replace all the sticks at once.
My System SpecsSystem Spec
27 Jul 2012   #8

MS Windows 7 Ultimate SP1 64-bit
 
 

lloyd,
I'll give you a quick thing to try.

Remove all chips.

Reinsert one and only one chip.

Make 100% certain that the chip is firmly installed.

Failure in install chips correctly and firmly is normally the cause of such massive failures.
My System SpecsSystem Spec
27 Jul 2012   #9

7 ultimate 64x
 
 

Tested the dead stick in two other slots, same result.
Tested all sticks in separate slots, no problems except with the dead stick.
I'll keep this post open just in case something else happens, otherwise I'll mark it solved in a day or two.
My System SpecsSystem Spec
27 Jul 2012   #10

MS Windows 7 Ultimate SP1 64-bit
 
 

Sounds good.
My System SpecsSystem Spec
Reply

 BSOD/ Post login System Hang/ Explorer.exe Crash





Thread Tools



Similar help and support threads for2: BSOD/ Post login System Hang/ Explorer.exe Crash
Thread Forum
annoying explorer.exe crash loop upon system start-up BSOD Help and Support
【Explorer Crash】netcfgx.dll caused explorer.exe crash BSOD Help and Support
Solved Welcome screen hang, log on hang, black screen crash, and more! BSOD Help and Support
Windows Login hang time, BlackSOD after login BSOD Help and Support
Solved BSOD -> Hang at system repair -> cannot boot at all BSOD Help and Support
Network drives cause Explorer to hang and crash Network & Sharing
Windows 7 x64 Hang/Crash No BSOD BSOD Help and Support

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 03:18 AM.
Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App
  

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33