Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: BSOD at random times, error 0x0000004e

20 Sep 2012   #51
Dave76

Microsoft Community Contributor Award Recipient

Windows 7 Ult x64 - SP1/ Windows 8 Pro x64
 
 

Have you been having any more crashes?

If you have post the full report: Blue Screen of Death (BSOD) Posting Instructions


My System SpecsSystem Spec
.
24 Sep 2012   #52
kai246

Windows 7 Professional 64bit
 
 

My computer did crash before changing av, I have uploaded the necessary files. Also after uninstalling McAfee and going back to Security Essentials, it blue screened again.
My System SpecsSystem Spec
24 Sep 2012   #53
Dave76

Microsoft Community Contributor Award Recipient

Windows 7 Ult x64 - SP1/ Windows 8 Pro x64
 
 

Did you update all the drivers from your motherboard site?

Did you uninstall all of the MSI utilities?
These are known to cause corruption and crashes.

Are these BIOS voltage settings still correct?
CPU Core Voltage is 1.0160v
DRAM voltage is 1.5000v
Post the CPU IO Voltage, this is the IMC (Integrated Memory Controller), need this to make some adjustments.

Your last crashes:
Code:
STOP 0x0000004E: PFN_LIST_CORRUPT
Usual causes:  Device driver, ?memory
Probably caused by : memory_corruption ( nt!MiBadShareCount+4c )
PROCESS_NAME:  Borderlands 2 
IMAGE_NAME:  memory_corruption
-----------------------------------------------------------------------------
STOP 0x0000001A: MEMORY_MANAGEMENT
Usual causes:  Device driver, memory, kernel
Probably caused by : hardware_ram ( ZEROED_PAGE_CORRUPTED )
IMAGE_NAME:  hardware_ram
FAILURE_BUCKET_ID:  X64_0x1a_8887_ZEROED_PAGE_CORRUPTED
Both of these crashes are indicating RAM problems.
Your RAM is a non-major brand, it does not have XMP setting which may mean it is not designed for Intel systems. The lack of information listed by CPUZ indicates non-standard practices.
The two RAM cards are giving different CPUZ SPD tab information, the JEDEC timings. This indicates the two cards aren't the same and may be causing compatibility issues.

Adjusting some of the settings may help with stability, with more information I can suggest setting changes.

Are your RAM cards in slots #2 & #4 on the motherboard?

Post the voltages requested above and the RAM slot configuration and we can continue.
My System SpecsSystem Spec
.

25 Sep 2012   #54
kai246

Windows 7 Professional 64bit
 
 

Yep, I have uninstalled all of the utilities from MSI, I actually had something called supercharger installed which I forgot to uninstall. However I do have something called ClickBios installed which I have been using as when trying to get into the bios normally, everything is off the screen and unable to get to any of the options as I cannot make my way around this screen. Also I have updated all of the drivers, however there is a realtek audio driver that will not install.

These are all from ClickBios:
The CPU Core voltage is 1.0160V
DRAM Voltage is 1.5000V
The CPU I/O Voltage is 1.048V
Also Yes the Ram sticks are in slot #2 and #4
My System SpecsSystem Spec
25 Sep 2012   #55
Dave76

Microsoft Community Contributor Award Recipient

Windows 7 Ult x64 - SP1/ Windows 8 Pro x64
 
 

Can you access your BIOS at bootup?
Press DEL repeatedly when you see the option in the boot screen.
If you can get access to your BIOS this way then uninstall the ClickBios app for testing.
Since it's not working correctly it may be causing issues.


Change the DRAM voltage to 1.550V
Change the CPU I/O Voltage to 1.120V

To test the CPU and some of the RAM run OCCT.
OCCT stability checking tool
Run the CPU:OCCT test for at least 30 minutes, be sure to monitor your CPU and GPU temps.
Set the time before you start.
When its done, pass or fail, it will make some graphs. Post these here as they are useful for analyses.
My System SpecsSystem Spec
26 Sep 2012   #56
kai246

Windows 7 Professional 64bit
 
 

I cant actually explain whats wrong upon entering the bios, except that I am unable to make my way around it due to most of it being off the screen or being very glitchy. Ive taken a few snaps of it to show what I mean.

As you can see from my badly taken photos, the right side of the screen is cut off and I cannot see anything on that. Also in the third picture the overlapping "System Date"and "System time" just keeps flashing on and off screen quickly.

Having said all that should I still uninstall Clickbios or should I change the voltages through there.
My System SpecsSystem Spec
26 Sep 2012   #57
Dave76

Microsoft Community Contributor Award Recipient

Windows 7 Ult x64 - SP1/ Windows 8 Pro x64
 
 

Did you enter the BIOS from the boot screen by pressing the DELETE key?
Are the attached pictures from ClickBIOS or from entering the BIOS at boot?
If they are from ClickBIOS, don't do anything from there.

If not, then try to get into the BIOS from the boot screen.
My System SpecsSystem Spec
26 Sep 2012   #58
kai246

Windows 7 Professional 64bit
 
 

Yes, these pictures are from entering the bios through pressing delete at boot screen, however everything looks alright when I do enter through clickbios from the desktop
My System SpecsSystem Spec
27 Sep 2012   #59
Dave76

Microsoft Community Contributor Award Recipient

Windows 7 Ult x64 - SP1/ Windows 8 Pro x64
 
 

Looks like the BIOS is corrupt, this can cause a lot of issues.

Re-install your BIOS.
Use V1.2 again.
How to flash the BIOS
Use the first method.
My System SpecsSystem Spec
27 Sep 2012   #60
kai246

Windows 7 Professional 64bit
 
 

In the link provided, it says I have to type in to the dos command "afude23B e7752ims.220", although I noticed that e7752ims.220 was their bios version. Mine is different (e7798ims ver 1.2), should i enter this instead? Also I'm not sure where the".220" came from, should I enter this in as well?

Also a weird thing happened when trying to enter the bios again, I turned the computer on without the hdmi cable fitted in and entered the bios, then when I put the hdmi wire into the computer everything looked normal and as it should be, I could see all the options and it was not glitchy at all. Ive not managed to get that to happen again and its gone back to the glitchy mess it was before.
My System SpecsSystem Spec
Reply

 BSOD at random times, error 0x0000004e




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
Random BSOD's at random times often error 0x0000001E
Hello, after searching through many forums and Windows help sites i still can't help myself to find, why i am getting these bluescreens. I even installed Windows completely new, but after installing the Realtek GBE network driver (manually, cause Windows didn't find it) the 'fun' began again. I...
BSOD Help and Support
Random BSOD, error 0x0000004e
Been having this problem for several weeks now. Computer will be running fine and then suddenly BSOD. Seems like its a different error code each time, but I didn't see the first few because I had automatic restart selected and it didn't give me enough time to read them. I recently tried to use...
BSOD Help and Support
BSOD happens daily at completely random times, recent error:0x0000004E
Hi, I've been experiencing blue screens almost daily for 6 months now. It all start around the time I upgraded to windows 8 in the summer. Since then, I downgraded to windows 7 and also experienced blue screens daily. I've updated all motherboard drivers (chipset, lan, usb ect) as well as network...
BSOD Help and Support
Random BSOD's: Error 0x0000004E
Hello everyone, I've been recently getting a lot of random BSOD's lately and it has started to get really frustrating because I'm not entirely sure what is causing it. I usually get them randomly when my computer is idle, playing games, or even when I am shutting down the computer. Attached is...
BSOD Help and Support
Random BSOD error 0x0000004e ntoskrnl.exe+7f1c0
Is Windows 7 . . . x64 bit - the original installed OS on the system? windows 7 - an OEM or full retail version? OEM - What is the age of system (hardware)? 6 months - What is the age of OS installation 6 months For a long time now i have been experiencing stop errors related to ntoskrnl.exe ...
BSOD Help and Support
Random BSOD during Random times, error 0x8000000000000002
Hey everyone, Im new here on this forum. I've been having this extremely frustrating problem ever since i swapped out my Motherboard for a new one. I reformatted my computer multiple times, yet my computer seems to BSOD randomly. What happenes is that everything becomes unresponsive; cant...
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 23:33.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App