Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: BSOD at random times, error 0x0000004e

27 Sep 2012   #61
Dave76

Microsoft Community Contributor Award Recipient

Windows 7 Ult x64 - SP1/ Windows 8 Pro x64
 
 

Use the second method - Flash AMI UEFI BIOS by MFLASH.

You can also try this method: MSI HQ Forum BIOS Flash Tool


My System SpecsSystem Spec
.
27 Sep 2012   #62
kai246

Windows 7 Professional 64bit
 
 

I managed to flash the bios using the second method from the list (m flash), however upon rebooting, the same problems came up when going into the bios. It was glitchy and not all of the options were present.

I have managed to get in to the bios with everything working normally and the display looking good, at will now, as I found its just a case of taking out the hdmi wire before going into the bios (pressing delete on start up), I then put the hdmi wire back into the computer and the bios looks normal and is fully functional. Its weird that these steps need to be taken for it to work as if I were to have the hdmi wire already in the computer when turning on the computer I would come up with the errors I previously took pictures of.

Should I keep doing these steps and change the voltages as requested to do before?
My System SpecsSystem Spec
27 Sep 2012   #63
Dave76

Microsoft Community Contributor Award Recipient

Windows 7 Ult x64 - SP1/ Windows 8 Pro x64
 
 

Yes, continue with the voltage adjustments.
If the BIOS flash didn't solve the issues, then it must be a BIOS deficiency, hopefully they will fix it in the next version.
My System SpecsSystem Spec
.

28 Sep 2012   #64
kai246

Windows 7 Professional 64bit
 
 

The dram voltage cannot be changed to specific numbers, It has given me a list of what it can be changed to, the list is 1.3500v, 1.5000v (Currently on this), 1.6500v and 1.8000v. Shall I change it to 1.6500v?

Also Im not sure where I can change the voltage for the cpu I/O. It seems that I can actually only change the CPU Ratio, CPU core voltage and the DRAM voltage.
My System SpecsSystem Spec
29 Sep 2012   #65
Dave76

Microsoft Community Contributor Award Recipient

Windows 7 Ult x64 - SP1/ Windows 8 Pro x64
 
 

Is that in the OC Genie section?

Look in Overclocking Settings > Standard Mode > DRAM Voltage, change it from 'Auto' to 'Manual' and check if you have more options.

Go to Overclocking Settings > Standard Mode, what options do you have for 'My OC Genie'?

Have you had any crashes in the last four days?
If you have post the crash reports.

Run memtest86+ again, best to run overnight, minimum of 7 full passes.
If you get any errors you can stop the test.
My System SpecsSystem Spec
29 Sep 2012   #66
kai246

Windows 7 Professional 64bit
 
 

The same options are in each of the standard mode and overclock genie. There is no option that says manual, instead there are prefixed numbers that i can choose from a list.

It has crashed twice in the past couple of days and I've uploaded the necessary information.

Also I am running another memtest as we speak on one of my modules and will start the next module later day, so Ill get back to you with the results for that.

EDIT: Whilst running memtest I got another blue screen, however this ended in a0 which is not not something I've seen before, I have updated the information you need to include this dump as well. I had left my computer to itself so couldn't see if there was any errors but will get back to you if I see any as I have started the test again

Another EDIT: It seems I'm actually unable to do a memtest without it blue screening, after trying again it ended up blue screening, this is odd though as I used to be able to get through these tests before
My System SpecsSystem Spec
30 Sep 2012   #67
Dave76

Microsoft Community Contributor Award Recipient

Windows 7 Ult x64 - SP1/ Windows 8 Pro x64
 
 

The lack of BIOS voltage options from MSI is very disappointing, since the i series came out Intel specifically warns against using 1.65v RAM, they say it can damage the CPU.
This is due to the IMC (CPU Integrated Memory Controller), which is the CPU IO voltage and is a commonly known fix for large amount of RAM.
It is also recommended to keep the DRAM and IMC voltage within 0.50v of each other, this can cause CPU damage also. So the DRAM voltage options of 1.65v and 1.80v aren't even usable.

What slot do you have the RAM in?
Try it in slot #2 if it wasn't in it already.

Have you tried memtest86+ with the other RAM card yet?

Your last three crashes.
Code:
STOP 0x0000001A: MEMORY_MANAGEMENT
Usual causes:  Device driver, memory, kernel
PROCESS_NAME:  Borderlands2.e
FAILURE_BUCKET_ID:  X64_0x1a_403_nt!_??_::FNODOBFM::_string_+3267c
----------------------------------------------------------------------------------
STOP 0x0000004E: PFN_LIST_CORRUPT 
Usual causes:  Device driver, ?memory
Probably caused by : memory_corruption ( nt!MiBadShareCount+4c )
PROCESS_NAME:  MsMpEng.exe
IMAGE_NAME:  memory_corruption
FAILURE_BUCKET_ID:  X64_0x4E_99_nt!MiBadShareCount+4c
----------------------------------------------------------------------------------
STOP 0x000000A0: INTERNAL_POWER_ERROR 
The hibernation file is too small.
FAILURE_BUCKET_ID:  X64_0xA0_nt!PopWriteHiberPages+a3
First one, not much useful information.
Second is from memory corruption.
Third, if this is from the memtest86+ test, then is not the cause as the OS is not running.
Confirm you are not using the usually useless Windows memtest and are using the recommended memtest86+ for RAM testing.

RAM can be fickle and difficult to troubleshoot.
Budget/Value RAM is not known for it's reliability or stability.
Two main issues I noticed before:
1) No XMP listed in the CPUZ SPD tab, this is an Intel feature and listed in most RAM designed for Intel systems.
2) Any RAM that states it is for Intel and AMD systems usually fails on one or the other.

Try putting RAM card #1 in slot #2 and then in slot #4 and run memtest86+.
Pass or fail, run RAM card #2 in slot #2 and then in slot #4 and run memtest86+.
Let us know the results.
My System SpecsSystem Spec
Reply

 BSOD at random times, error 0x0000004e




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
Random BSOD's at random times often error 0x0000001E
Hello, after searching through many forums and Windows help sites i still can't help myself to find, why i am getting these bluescreens. I even installed Windows completely new, but after installing the Realtek GBE network driver (manually, cause Windows didn't find it) the 'fun' began again. I...
BSOD Help and Support
Random BSOD, error 0x0000004e
Been having this problem for several weeks now. Computer will be running fine and then suddenly BSOD. Seems like its a different error code each time, but I didn't see the first few because I had automatic restart selected and it didn't give me enough time to read them. I recently tried to use...
BSOD Help and Support
BSOD happens daily at completely random times, recent error:0x0000004E
Hi, I've been experiencing blue screens almost daily for 6 months now. It all start around the time I upgraded to windows 8 in the summer. Since then, I downgraded to windows 7 and also experienced blue screens daily. I've updated all motherboard drivers (chipset, lan, usb ect) as well as network...
BSOD Help and Support
Random BSOD's: Error 0x0000004E
Hello everyone, I've been recently getting a lot of random BSOD's lately and it has started to get really frustrating because I'm not entirely sure what is causing it. I usually get them randomly when my computer is idle, playing games, or even when I am shutting down the computer. Attached is...
BSOD Help and Support
Random BSOD error 0x0000004e ntoskrnl.exe+7f1c0
Is Windows 7 . . . x64 bit - the original installed OS on the system? windows 7 - an OEM or full retail version? OEM - What is the age of system (hardware)? 6 months - What is the age of OS installation 6 months For a long time now i have been experiencing stop errors related to ntoskrnl.exe ...
BSOD Help and Support
Random BSOD during Random times, error 0x8000000000000002
Hey everyone, Im new here on this forum. I've been having this extremely frustrating problem ever since i swapped out my Motherboard for a new one. I reformatted my computer multiple times, yet my computer seems to BSOD randomly. What happenes is that everything becomes unresponsive; cant...
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 11:59.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App