Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.



Windows 7: BSOD driver overrun stack buffer - ntoskrnl.exe

31 Jul 2012   #1

Windows 7 Professional x64
 
 
BSOD driver overrun stack buffer - ntoskrnl.exe

Hi All,

I have built this PC about 2months ago all was fine until I started to get BSOD every few minutes. I thought it was my ssd msata OCZ NOCTI causing the problem. Anyway I ran a memtest on both RAM sticks for about 4 hrs each, I have done this twice, with no errors.

I decided to do a fresh install to the ssd and it would BSOD on the windows install. I had the bios set to AHCI for the ssd. I pulled the ssd on attached my WD caviar black set the bios to IDE and it blue screened once on install. I tried again and install went fine.

I ran prime95 for 36hrs and an intel burnintest all worked no problem no errors. Today the BSOD has returned and I have no idea why. I updated the bios to the latest still happening. I was hoping you knowledgeable people could look at my dump files to see if there is anything wrong. I am starting to think the my mobo is the problem.

Brad

My System SpecsSystem Spec
31 Jul 2012   #2

Microsoft Windows 7 Home Premium 64-bit 7601 Multiprocessor Free Service Pack 1
 
 

Hello,

Code:
Start Menu\Programs\Tweaking.com\Windows Repair (All in One)	Public:Start Menu\Programs\Tweaking.com\Windows Repair (All in One)	Public
Please remove this program because programs like these are known to cause problems. Even BSODs as it modifies the registry.

Code:
WD SES Device USB Device	USBSTOR\OTHER&VEN_WD&PROD_SES_DEVICE&REV_1020\574343305430353632353236&1	The drivers for this device are not installed.
I'd suggest finding the correct drivers for this external device.

Some of the dump files are blaming hardware. So to knock that problem out of the way, please follow the steps below:


Quote:
BugCheck 0x124


warning   Warning
Before you proceed with the following, answer these two questions: Are you still under warranty? Does your warranty allow you to open up the machine to check hardware? If you are unsure of the answers to these questions, contact your system manufacturer. WARNING: The steps that follow can void your warranty!!!

For your hardware stop 0x124 crash, read through Stop 0x124 - what it means and what to try and use the following hardware checks to supplement that link.
  • If you are overclocking any hardware, please stop.

  • If you have an SSD, make sure the following are up to date:
    • SSD firmware
    • BIOS Version
    • Chipset Drivers
    • Hard disk controller drivers/SATA drivers
    • If you have a Marvell IDE ATA/ATAPI device, make sure the drivers are up to date from the Intel site or Marvell site and not from your motherboard/vendor support site.

  • Run all but the advanced tests with SeaTools for HDDs.
    SeaTools for Windows

    SeaTools for DOS
  • Monitor temperatures during the following tests.
    Use the following programs to monitor the temperatures.
  • Run the boot version of Memtest86+ paying close attention to Parts 2 and 3 of the tutorial. Also, in case Memtest86+ misses anything and comes up with no errors, run the extended version of the Windows Memory Diagnostics Tool for at least five passes. These you may want to run overnight since they take a long time to complete (run them an hour before bed each of the next two nights and check before going to sleep that they are still running).

    For Part 3: If You Have Errors: If you swap any memory components, follow these steps for ESD safety:
    1. Shut down and turn off your computer.
    2. Unplug all power supplies to the computer (AC Power then battery for laptops, AC power for desktops)
    3. Hold down the power button for 30 seconds to close the circuit and ensure all power drains from components.
    4. Make sure you are grounded by using proper grounding techniques, i.e. work on an anti-static workbench, anti-static desk, or an anti-static pad. Hold something metallic while touching it to the anti-static surface, or use an anti-static wristband to attach to the anti-static material while working. If you do not have an anti-static workbench, desk, or pad, you can use your computer tower/case by finding a metal hold in it, such as a drive bay.
    Once these steps have been followed, it is safe to remove and replace components within your computer.

Coutesy of: writhziden
Post back results!

-Justin
My System SpecsSystem Spec
02 Aug 2012   #3

Windows 7 Professional x64
 
 
BSOD Back

Hey I run tests all yesterday the memtest+86, burn in tests, updated all the drivers. I did not do the GPU tests as I am just using onboard. Everything passed temps were stable under load at 50deg I ran prime95 all night no worries.

I am starting to think my mobo is the culprit anyway I have upped the lastest BSOD minidump can you please look.

Thanks.
My System SpecsSystem Spec
.


02 Aug 2012   #4

Microsoft Windows 7 Home Premium 64-bit 7601 Multiprocessor Free Service Pack 1
 
 

From what i have been researching about this error, it could be your Motherboard. But try updating your BIOS to the latest version

-Justin
My System SpecsSystem Spec
02 Aug 2012   #5

Windows 7 Professional x64
 
 

Quote:
it could be your Motherboard
looks that way it can't be anything else thing this stage. This is the second faulty Gigabyte board I've had and the last!!

I did update the bios one of the first things I did when the BSOD started. I have actually now reset to factory defaults!! Still there.
My System SpecsSystem Spec
02 Aug 2012   #6

Microsoft Windows 7 Home Premium 64-bit 7601 Multiprocessor Free Service Pack 1
 
 

Post the latest crash files.

-Justin
My System SpecsSystem Spec
02 Aug 2012   #7

Windows 7 Professional x64
 
 

I did a couple of posts back.
My System SpecsSystem Spec
02 Aug 2012   #8

Microsoft Windows 7 Home Premium 64-bit 7601 Multiprocessor Free Service Pack 1
 
 

It keeps blaming your intel drivers. So uninstall and do a fresh install of the drivers. You said you got a blue screen as you were doing a fresh install of Windows 7 to your SSD? If so the problem could be your SSD.

-Justin
My System SpecsSystem Spec
02 Aug 2012   #9

Windows 7 Professional x64
 
 

You mean a clean install of windows 7 altogether or can I do just the drivers? I have ditched the solid state altogether the install atm is on the WD sata. I was getting alot more BSOD with the SSD which is why I pulled it think that was the problem.
My System SpecsSystem Spec
02 Aug 2012   #10

Microsoft Windows 7 Home Premium 64-bit 7601 Multiprocessor Free Service Pack 1
 
 

No uninstall the drivers, and then re-install the latest versions.

-Justin
My System SpecsSystem Spec
Reply

 BSOD driver overrun stack buffer - ntoskrnl.exe





Thread Tools



Similar help and support threads for2: BSOD driver overrun stack buffer - ntoskrnl.exe
Thread Forum
Solved BSOD Error: Faulty driver on the kernal stack BSOD Help and Support
BSODs, latest saying "A driver has overrun stacked based buffer" BSOD Help and Support
BSOD , Driver has overrun a stack-based buffer BSOD Help and Support
BSOD "A driver has overun a stack based buffer" BSOD Help and Support
BSOD- need to replace faulty driver on kernel stack BSOD Help and Support
BSOD ( driver has overrun a stack-based buffer ) BSOD Help and Support
Visual C++ Buffer Overrun Error Gaming

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 06:17 AM.
Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App
  

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33