Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.



Windows 7: BSOD coming back from sleep.

02 Aug 2012   #1

Windows 7 Ultimate 64bit
 
 
BSOD coming back from sleep.

I get BSOD when computer comes back from sleep mode. I attach the zip from the Diag Tool v4. Thanks for your work!

My System SpecsSystem Spec
.

02 Aug 2012   #2

Windows 7 Ultimate 64bit
 
 

Anyone please help?
My System SpecsSystem Spec
02 Aug 2012   #3

Microsoft Windows 7 Home Premium 64-bit 7601 Multiprocessor Free Service Pack 1
 
 

Sorry for the late reply.

Code:
Marvell 91xx Config ATA Device	IDE\PROCESSORMARVELL_91XX_CONFIG_____________________1.01____\6&1E5F32DB&0&1.1.0	The drivers for this device are not installed.
Please install these drivers. This could be a main cause of the BSODs.

Looks like hardware problems. Do the following:


Quote:
BugCheck 0x124


warning   Warning
Before you proceed with the following, answer these two questions: Are you still under warranty? Does your warranty allow you to open up the machine to check hardware? If you are unsure of the answers to these questions, contact your system manufacturer. WARNING: The steps that follow can void your warranty!!!

For your hardware stop 0x124 crash, read through Stop 0x124 - what it means and what to try and use the following hardware checks to supplement that link.
  • If you are overclocking any hardware, please stop.

  • If you have an SSD, make sure the following are up to date:
    • SSD firmware
    • BIOS Version
    • Chipset Drivers
    • Hard disk controller drivers/SATA drivers
    • If you have a Marvell IDE ATA/ATAPI device, make sure the drivers are up to date from the Intel site or Marvell site and not from your motherboard/vendor support site.

  • Run all but the advanced tests with SeaTools for HDDs.
    SeaTools for Windows

    SeaTools for DOS
  • Monitor temperatures during the following tests.
    Use the following programs to monitor the temperatures.
  • Run the boot version of Memtest86+ paying close attention to Parts 2 and 3 of the tutorial. Also, in case Memtest86+ misses anything and comes up with no errors, run the extended version of the Windows Memory Diagnostics Tool for at least five passes. These you may want to run overnight since they take a long time to complete (run them an hour before bed each of the next two nights and check before going to sleep that they are still running).

    For Part 3: If You Have Errors: If you swap any memory components, follow these steps for ESD safety:
    1. Shut down and turn off your computer.
    2. Unplug all power supplies to the computer (AC Power then battery for laptops, AC power for desktops)
    3. Hold down the power button for 30 seconds to close the circuit and ensure all power drains from components.
    4. Make sure you are grounded by using proper grounding techniques, i.e. work on an anti-static workbench, anti-static desk, or an anti-static pad. Hold something metallic while touching it to the anti-static surface, or use an anti-static wristband to attach to the anti-static material while working. If you do not have an anti-static workbench, desk, or pad, you can use your computer tower/case by finding a metal hold in it, such as a drive bay.
    Once these steps have been followed, it is safe to remove and replace components within your computer.

Coutesy of: writhziden
Also run these:

After post results.

-Justin
My System SpecsSystem Spec
.


02 Aug 2012   #4

Windows 7 Ultimate 64bit
 
 

I like later better than not at all

Ok, thnx for the advices. I have now installed the driver that was missing and will see if that fixes the problem, if not i will proceed to check my hardware as you adviced.

Thank you so much for taking your time!
My System SpecsSystem Spec
02 Aug 2012   #5

Microsoft Windows 7 Home Premium 64-bit 7601 Multiprocessor Free Service Pack 1
 
 

If you receive anymore BSODs please post up the latest crash files.

-Justin
My System SpecsSystem Spec
Reply

 BSOD coming back from sleep.





Thread Tools



Similar help and support threads for2: BSOD coming back from sleep.
Thread Forum
BSOD coming off of sleep BSOD Help and Support
BSOD when coming back from sleep. BSOD Help and Support
Random BSOD, at one point kept coming back BSOD Help and Support
BSOD minutes after coming back from sleep BSOD Help and Support
BSoD when coming out of sleep BSOD Help and Support
BSOD coming back from sleep BSOD Help and Support
When logging on, or coming back from sleep, screen has an orange tint Graphic Cards

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 04:04 PM.
Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App
  

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33