Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.



Windows 7: BSOD every 2-4 hours, STOP 0x00000A

03 Aug 2012   #1

Windows 7 home premium x64
 
 
BSOD every 2-4 hours, STOP 0x00000A

I made a thread yesterday which was barried and no one responded or anything! I have a screen shot this time, this STOP 0x00000A keeps happening, and I need to know if it's a bad mobo, because it looks like it wasn't ram, and I bought new ram and placed it in and it's still bad, it seems like all of my slots are bad, no matter which ones I put them in. Here's the picture I took of the errors, it's the same one each time. Attachment 224643

My System SpecsSystem Spec
.

03 Aug 2012   #2

Microsoft Windows 7 Home Premium 64-bit 7601 Multiprocessor Free Service Pack 1
 
 

You need to be patient. I am sorry that no one replied, but the BSOD Team is swamped.

It's blaming hardware. Do the following steps:


Quote:
BugCheck 0x124


warning   Warning
Before you proceed with the following, answer these two questions: Are you still under warranty? Does your warranty allow you to open up the machine to check hardware? If you are unsure of the answers to these questions, contact your system manufacturer. WARNING: The steps that follow can void your warranty!!!

For your hardware stop 0x124 crash, read through Stop 0x124 - what it means and what to try and use the following hardware checks to supplement that link.
  • If you are overclocking any hardware, please stop.

  • If you have an SSD, make sure the following are up to date:
    • SSD firmware
    • BIOS Version
    • Chipset Drivers
    • Hard disk controller drivers/SATA drivers
    • If you have a Marvell IDE ATA/ATAPI device, make sure the drivers are up to date from the Intel site or Marvell site and not from your motherboard/vendor support site.

  • Run all but the advanced tests with SeaTools for HDDs.
    SeaTools for Windows

    SeaTools for DOS
  • Monitor temperatures during the following tests.
    Use the following programs to monitor the temperatures.
  • Run the boot version of Memtest86+ paying close attention to Parts 2 and 3 of the tutorial. Also, in case Memtest86+ misses anything and comes up with no errors, run the extended version of the Windows Memory Diagnostics Tool for at least five passes. These you may want to run overnight since they take a long time to complete (run them an hour before bed each of the next two nights and check before going to sleep that they are still running).

    For Part 3: If You Have Errors: If you swap any memory components, follow these steps for ESD safety:
    1. Shut down and turn off your computer.
    2. Unplug all power supplies to the computer (AC Power then battery for laptops, AC power for desktops)
    3. Hold down the power button for 30 seconds to close the circuit and ensure all power drains from components.
    4. Make sure you are grounded by using proper grounding techniques, i.e. work on an anti-static workbench, anti-static desk, or an anti-static pad. Hold something metallic while touching it to the anti-static surface, or use an anti-static wristband to attach to the anti-static material while working. If you do not have an anti-static workbench, desk, or pad, you can use your computer tower/case by finding a metal hold in it, such as a drive bay.
    Once these steps have been followed, it is safe to remove and replace components within your computer.

Coutesy of: writhziden

Code:
hamachi.sys Thu Nov 30 14:24:52 2006 (456F3E14)
Drivers before 2009 are known to cause problems. Please update: https://secure.logmein.com/US/support/hamachi2/

After please post back results.

-Justin
My System SpecsSystem Spec
03 Aug 2012   #3

Windows 7 home premium x64
 
 

Thanks for responding, The last time I had this problem, I thought it was bad ram, so I bought new ram, and replaced it. It was fine for two days and now it's acting up again, Memtest is showing bad ram, I've tested my ram on a different computer and it's perfectly fine, which goes to make me believe that my ram slots on my mobo right now are bad, because I've tried it every way possible. My harddrive is fine, I tested the last time I had posted here, my GPU is fine, swapped it to another computer and it worked fine without any bsod's or anything, I did swap my ram like I stated above which worked fine on another computer but this one is having problems with it. I can't tell if it's drivers or my mobo, I'm thinking mobo because I had swapped ram back and fourth into different slots, alone, they're both different brands and both different clocks. The weird part is the problem had only started occurring a week after I had been using my system. I'm out of ideas and I just can't figure out if it's my mobo or if it's a faulty driver somewhere, but I'm still thinking mobo.
My System SpecsSystem Spec
.


03 Aug 2012   #4

Windows 7 home premium x64
 
 

I just realized, could incompatible ram be the issue? My Mobo is an ASrock 970 Extreme3 and both sets of ram that I had weren't on the compatible list, could this be the problem?
My System SpecsSystem Spec
03 Aug 2012   #5

Microsoft Windows 7 Home Premium 64-bit 7601 Multiprocessor Free Service Pack 1
 
 

Yes that could be a problem.

-Justin
My System SpecsSystem Spec
Reply

 BSOD every 2-4 hours, STOP 0x00000A





Thread Tools



Similar help and support threads for2: BSOD every 2-4 hours, STOP 0x00000A
Thread Forum
Solved BSOD 0x00000a while idle BSOD Help and Support
BSOD 0x00000A after turning on computer. BSOD Help and Support
Solved BSOD every 1-3 hours, STOP 0x000000a BSOD Help and Support
BSOD while playing basically any game, error code 0x00000A BSOD Help and Support
IRQL Not Less or Equal/ Stop: 0x00000A (or 1E) BSOD Help and Support
irql_not_less_or_equal stop:0x00000A BSOD Help and Support
BSOD after few hours of stop BSOD Help and Support

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 12:10 AM.
Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App
  

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33