Bsod 0x0a

Page 1 of 2 12 LastLast

  1. Posts : 52
    Windows 7
       #1

    Bsod 0x0a


    Open prototype 2 and i got bsod, cpu, vga, ram run at stock speed, no OC

    080512-27237-01.dmp


    updated
    Last edited by Mano; 07 Aug 2012 at 07:55.
      My Computer


  2. Posts : 52
    Windows 7
    Thread Starter
       #2

    can anyone at least teach my how to read this dmp file?
      My Computer


  3. Posts : 2,393
    Microsoft Windows 7 Ultimate: x64 (SP1)
       #3

    Hello Mano.

    Please provide a full report of the crashes you're having. Looking at one crash dump is a small perspective of the Blue Screen of Death motto.

    https://www.sevenforums.com/crashes-d...tructions.html

    Best Regards,
    Frederik.
      My Computer


  4. Posts : 52
    Windows 7
    Thread Starter
       #4

    thanks, updated at 1st post
      My Computer


  5. Posts : 2,393
    Microsoft Windows 7 Ultimate: x64 (SP1)
       #5

    Thank you. :)

    BSOD Analyse

    Devices

    You have three devices that doesn't work properly. Unplug them / Uninstall them or update their driver. If you go to Device Manager, they should be marked with a .

    Code:
    adfs	ROOT\LEGACY_ADFS\0000	This device is not present, is not working properly, or does not have all its drivers installed.
    archlp	ROOT\LEGACY_ARCHLP\0000	This device is not present, is not working properly, or does not have all its drivers installed.
    archlp	ROOT\LEGACY_ARCSEC\0000	This device is not present, is not working properly, or does not have all its drivers installed.
    Looking at your bugcheck it's likely that a memory corruption event was triggered. Though a driver could be causing the memory to be borked, but we're usually suggesting a memory test before moving forward. Do a scan with Memtest86+. Memtest is a scanner that'll check your sticks for errors.

       Warning
    Note that the below instructions may break your WARRANTY rules. If you're unsure check manuals, separated warranty papers, stickers on computer for secure permission.

    To ensure that we'll know if it's the slots on the motherboard that's broken, or the sticks itself - we have a little procedure we'll recommend. Remove 1 stick, scan the other with Memtest in the current slot. After 7 passes, move the stick to another slot and scan, and so on and so forth until you've scanned all the sticks, and all the slots, one by one.

    Memtest86+ - Advanced Memory Diagnostic Tool

    Best Regards,
    Frederik.
      My Computer


  6. Posts : 52
    Windows 7
    Thread Starter
       #6

    Thanks for the diagnostic, but i couldnt find the device


    Will post memtest result later.
      My Computer


  7. Posts : 2,393
    Microsoft Windows 7 Ultimate: x64 (SP1)
       #7

    Alright.

    Still, in Device Manager, go on top and select View followed by Show hidden Devices. Are there any yellow triangle mark on the hidden devices? ()
    Also I noticed that the so called Devices the NFO pointed, belongs to Adobe actually. Make sure to have your Reader, Flash, other Adobe Products' software updated.
    There's also some Arcsoft products within the NFO points. It's basically legacies of software acting up, and telling you that they have problems.

    Table

    • adfs-legacy
      • Yahoo Answers said:
        It's Adobe Drive File System.

        If you no longer have any Adobe products then they haven't properly unistalled.
        You can use REVO Uninstaller to get rid of the extra bits.

        If you still have an Adobe program then uninstall and reinstall it.

    • archlp-legacy
      • Microsoft Answers said:
        It's a file from Arcsoft (often Total Media Theatre or Total Media Extreme). I'd advise you to uninstall and thenreinstall any Arcsoft programs if you still want them and check for updates atwww.arcsoft.com.



    Best Regards,
    Frederik.
      My Computer


  8. Posts : 52
    Windows 7
    Thread Starter
       #8

    thanks you, saw the 3 devices. I had arcsoft total media theatre but since i cant make it runs (it keeps loading forever) i uninstalled it.
      My Computer


  9. Posts : 2,393
    Microsoft Windows 7 Ultimate: x64 (SP1)
       #9

    Mano said:
    thanks you, saw the 3 devices. I had arcsoft total media theatre but since i cant make it runs (it keeps loading forever) i uninstalled it.
    So the Show Hidden Devices manoeuvre worked?

    Sweet. We got those fixed then.

    Best Regards,
    Frederik.
      My Computer


  10. Posts : 52
    Windows 7
    Thread Starter
       #10

    I used memtest fail-safe mode with both 2 ram stick slotted. Come back after about 10 hours testing and the result said there is no error detected.
      My Computer


 
Page 1 of 2 12 LastLast

  Related Discussions
Our Sites
Site Links
About Us
Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd
All times are GMT -5. The time now is 22:56.
Find Us