0x0000001e BSOD on custom built computer

Page 1 of 3 123 LastLast

  1. Posts : 21
    Windows 7 Home Premium 64bit.
       #1

    BSOD 0x0000001e and 0x0000003b on newly built computer


    I recently built a new computer and have been getting between 1 and 4 BSODs a day. They seem to occur at no particular occasion when I am not doing a particular task. I have had blue screens when the computer is idle, when playing a game. Can someone please help me find out the issue here?
      My Computer


  2. Posts : 21
    Windows 7 Home Premium 64bit.
    Thread Starter
       #2

    7b35dbf48cc2b83b38bef5a3a816de54.png

    Here is a gyazo of my specs in case you don't know them.
      My Computer


  3. Posts : 2,913
    Windows 7 Ultimate x64 SP1
       #3

    Where did you get your drivers? Did you install any drivers?
      My Computer


  4. Posts : 21
    Windows 7 Home Premium 64bit.
    Thread Starter
       #4

    I installed all the drivers I was given on discs that came with my hardware. I also went online to check for updates and updated them as necessary. However I used driver detective to see if any drivers were out of date and there were two intel chipset drivers that were out of date. i tried installing updates for these fromt he intel website and the Gigabyte website but driver detective still says they're out of date. perhaps those two drivers are my problem?
      My Computer


  5. Posts : 2,913
    Windows 7 Ultimate x64 SP1
       #5

    I never recommend any kind of driver update tool. It's always best to visit the manufacturer and get the latest drivers.

    Have you updated the Realtek LAN driver from the Gigabyte website? That driver was identified in one of the minidumps, not as the cause but as the process that was executing when a crash occurred.

    Are you overclocking? If so, stop.
      My Computer


  6. Posts : 21
    Windows 7 Home Premium 64bit.
    Thread Starter
       #6

    I'm not overclocking my CPU or GPU in any way.

    I am also downloading the Realtek LAN driver from this link GIGABYTE - Motherboard - Socket 1155 - GA-H61MA-D2V (rev. 2.1)
      My Computer


  7. Posts : 21
    Windows 7 Home Premium 64bit.
    Thread Starter
       #7

    Here is a .dmp file of a crash I just had. I hope you can get some information from this.
      My Computer


  8. Posts : 2,913
    Windows 7 Ultimate x64 SP1
       #8

    Unfortunately that doesn't point to anything in particular. Have you checked for an updated SSD firmware? Have you verified all hardware is properly seated and installed?

    Also, to help isolate problems, remove all non-essential hardware (extra hard drives, remove video card if you have onboard video, etc). I would go down to 4 GB RAM, making sure to follow the memory instructions in your manual for proper placement of the memory modules.

    We may have to do a memory stress test next.
      My Computer


  9. Posts : 21
    Windows 7 Home Premium 64bit.
    Thread Starter
       #9

    Ok so I have removed 4GB of my Ram and started the computer in safe mode with networking. What next? Should I run Memtestx86?
      My Computer


  10. Posts : 21
    Windows 7 Home Premium 64bit.
    Thread Starter
       #10

    I also downloaded an update for my SSD firmware. If I run Memtest how should I do it with only 4GB of my ram in one of my two slots?
      My Computer


 
Page 1 of 3 123 LastLast

  Related Discussions
Our Sites
Site Links
About Us
Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd
All times are GMT -5. The time now is 04:57.
Find Us