Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.



Windows 7: 0x0000001e BSOD on custom built computer

01 Aug 2012   #1

Windows 7 Home Premium 64bit.
 
 
BSOD 0x0000001e and 0x0000003b on newly built computer

I recently built a new computer and have been getting between 1 and 4 BSODs a day. They seem to occur at no particular occasion when I am not doing a particular task. I have had blue screens when the computer is idle, when playing a game. Can someone please help me find out the issue here?

My System SpecsSystem Spec
.

01 Aug 2012   #2

Windows 7 Home Premium 64bit.
 
 

7b35dbf48cc2b83b38bef5a3a816de54.png

Here is a gyazo of my specs in case you don't know them.
My System SpecsSystem Spec
01 Aug 2012   #3

Windows 7 Ultimate x64 SP1
 
 

Where did you get your drivers? Did you install any drivers?
My System SpecsSystem Spec
.


01 Aug 2012   #4

Windows 7 Home Premium 64bit.
 
 

I installed all the drivers I was given on discs that came with my hardware. I also went online to check for updates and updated them as necessary. However I used driver detective to see if any drivers were out of date and there were two intel chipset drivers that were out of date. i tried installing updates for these fromt he intel website and the Gigabyte website but driver detective still says they're out of date. perhaps those two drivers are my problem?
My System SpecsSystem Spec
01 Aug 2012   #5

Windows 7 Ultimate x64 SP1
 
 

I never recommend any kind of driver update tool. It's always best to visit the manufacturer and get the latest drivers.

Have you updated the Realtek LAN driver from the Gigabyte website? That driver was identified in one of the minidumps, not as the cause but as the process that was executing when a crash occurred.

Are you overclocking? If so, stop.
My System SpecsSystem Spec
01 Aug 2012   #6

Windows 7 Home Premium 64bit.
 
 

I'm not overclocking my CPU or GPU in any way.

I am also downloading the Realtek LAN driver from this link GIGABYTE - Motherboard - Socket 1155 - GA-H61MA-D2V (rev. 2.1)
My System SpecsSystem Spec
01 Aug 2012   #7

Windows 7 Home Premium 64bit.
 
 

Here is a .dmp file of a crash I just had. I hope you can get some information from this.
My System SpecsSystem Spec
01 Aug 2012   #8

Windows 7 Ultimate x64 SP1
 
 

Unfortunately that doesn't point to anything in particular. Have you checked for an updated SSD firmware? Have you verified all hardware is properly seated and installed?

Also, to help isolate problems, remove all non-essential hardware (extra hard drives, remove video card if you have onboard video, etc). I would go down to 4 GB RAM, making sure to follow the memory instructions in your manual for proper placement of the memory modules.

We may have to do a memory stress test next.
My System SpecsSystem Spec
02 Aug 2012   #9

Windows 7 Home Premium 64bit.
 
 

Ok so I have removed 4GB of my Ram and started the computer in safe mode with networking. What next? Should I run Memtestx86?
My System SpecsSystem Spec
02 Aug 2012   #10

Windows 7 Home Premium 64bit.
 
 

I also downloaded an update for my SSD firmware. If I run Memtest how should I do it with only 4GB of my ram in one of my two slots?
My System SpecsSystem Spec
Reply

 0x0000001e BSOD on custom built computer





Thread Tools




Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 06:44 AM.
Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App
  

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33