Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Many different BSOD error codes.... No idea why. can anyone help?

16 Aug 2012   #1

Windows 7 Home Premium 64bit.
 
 
Many different BSOD error codes.... No idea why. can anyone help?

I have a newly built computer only a few months old. Can anyone help me find the cause for all these BSOD codes?


My System SpecsSystem Spec
.

20 Aug 2012   #2

Microsoft Windows 7 Ultimate: x64 (SP1)
 
 

BSOD Analyse

Processes

Can you identify what this belongs to?

Code:
mdnsresponder.exe	c:\program files (x86)\bonjour\mdnsresponder.exe	1964	8	200	1380	16/08/2012 21:55	2.0.2.0	337.28 KB (345,376 bytes)	18/05/2010 16:35
Memory / Driver

Looking at your bugcheck it's likely that a memory corruption event was triggered. Though a driver could be causing the memory to be borked, but we're usually suggesting a memory test before moving forward. Do a scan with Memtest86+. Memtest is a scanner that'll check your sticks for errors.

warning   Warning
Note that the below instructions may break your WARRANTY rules. If you're unsure check manuals, separated warranty papers, stickers on computer for secure permission.

To ensure that we'll know if it's the slots on the motherboard that's broken, or the sticks itself - we have a little procedure we'll recommend. Remove 1 stick, scan the other with Memtest in the current slot. After 7 passes, move the stick to another slot and scan, and so on and so forth until you've scanned all the sticks, and all the slots, one by one.

Memtest86+ - Advanced Memory Diagnostic Tool

Daemon Tools

Known BSODs causer. You can use the below uninstall in order to remove it completely. Instead you could use Magic-ISO.

DuplexSecure - Downloads

Code:
dtsoftbus01.sys Fri Jan 13 14:45:46 2012 (4F10358A)
Best Regards,
Frederik.
My System SpecsSystem Spec
23 Aug 2012   #3

Windows 7 Home Premium 64bit.
 
 

Thanks a lot for your reply. I've already done a thorough memtest run so I highly doubt it's that. I deleted Daemon tools and the apple software Bonjour and I am still getting BSODs. Do this .DMPs help?
My System SpecsSystem Spec
.


23 Aug 2012   #4

Microsoft Windows 7 Ultimate: x64 (SP1)
 
 

Yeps.

Driver Verifier

Quote:
Using Driver Verifier is an iffy proposition. Most times it'll crash and it'll tell you what the driver is. But sometimes it'll crash and won't tell you the driver. Other times it'll crash before you can log in to Windows. If you can't get to Safe Mode, then you'll have to resort to offline editing of the registry to disable Driver Verifier.

So, I'd suggest that you first backup your stuff and then make sure you've got access to another computer so you can contact us if problems arise.
Then make a System Restore point (so you can restore the system using the Vista/Windows 7 Startup Repair feature) - and create a System Repair Disc (Windows 7) if you don't have a full installation DVD.
You can do this by going to Start...All Programs...Maintenance...Create a System Repair Disc (don't forget to test the disc to make sure it works).

For Vista, you can download the repair discs from different websites. If unable to locate them, shoot me a PM and I'll point you to them.
For Win8, BSOD's are different - and we'll have to adjust how we do this with them.

Also, to ensure that you can recover, here's another couple of additional steps:
- Get to the Safe Mode menu (rapidly tap F8 just before the Windows splash screen comes up). Scroll down to and select "Disable automatic restart on System Failure"
- Get the RED information from this picture (in particular we will need the name of the file that the error occurred in):
Picture of a BSOD

Then, here's the procedure to run Driver Verifier:
- Go to Start and type in "verifier" (without the quotes) and press Enter
- Select "Create custom settings (for code developers)" and click "Next"
- Select "Select individual settings from a full list" and click "Next"
- Select everything EXCEPT FOR "IRP Logging", "Force Pending I/O Requests" and "Low Resource Simulation" and click "Next" ("Special Pool" may be able to be used depending on amount of RAM and errors being seen. In situations with small amounts of RAM, DO NOT select it),
- Select "Select driver names from a list" and click "Next"
Then select all drivers NOT provided by Microsoft and click "Next"
- Select "Finish" on the next page.

Reboot the system and wait for it to crash to the Blue Screen. Continue to use your system normally, and if you know what causes the crash, do that repeatedly. The objective here is to get the system to crash because Driver Verifier is stressing the drivers out. If it doesn't crash for you, then let it run for at least 36 hours of continuous operation (an estimate on my part).

Reboot into Windows (after the crash) and locate the memory dump file. If present, turn off Driver Verifier by going back in and selecting "Delete existing settings" on the first page. Then, zip up the memory dump file(s) and upload them with your next post. If no dump files were generated, post back for further suggestions.

If you can't get into Windows because it crashes too soon, try it in Safe Mode.
If you can't get into Safe Mode, try using System Restore from your installation DVD to set the system back to the previous restore point that you created.

If that doesn't work, post back and we'll have to see about fixing the registry entry off-line:
Code:
Delete these registry keys to stop Driver Verifier from loading (works in XP, Vista, Windows 7):
        HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Session Manager\Memory Management\VerifyDrivers
        HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Session Manager\Memory Management\VerifyDriverLevel
Best Regards,
Frederik.
My System SpecsSystem Spec
Reply

 Many different BSOD error codes.... No idea why. can anyone help?




Thread Tools



Similar help and support threads for2: Many different BSOD error codes.... No idea why. can anyone help?
Thread Forum
Solved BSOD with various error codes BSOD Help and Support
BSOD with kernel error, no idea BSOD Help and Support
BSOD with error codes 124 , 1e,3b BSOD Help and Support
BSOD with different error codes BSOD Help and Support
Solved BSOD - various error codes, various causes BSOD Help and Support
BSOD different error codes BSOD Help and Support
BSOD with 3 different error codes BSOD Help and Support

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd

All times are GMT -5. The time now is 06:23 AM.
Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App
  

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33