 | |
| |
| 19 Aug 2012 | #1 |
| | BSOD 0x7B Win 7 Home Prem, cannot log Hi, A few weeks ago, my SATA ports on the motherboard went bad. I bought a PCIe SATA card, hooked the harddrive to it, and recovered to dissimilar hardware and the computer worked fine. That's until I reboot (I leave it on all time, so I only reboot once every few weeks). Now I reboot and get BSOD 0x7B. I guess it's related to the SATA card with uses JMicron drivers. I cannot boot, not even in safe mode, so no way to run the SF diagnostic tools. I may be able to access files on the harddrive booting with Hirens or other. To start with, where and how should I upload the minidumps? TIA |
My System Specs | |
| 19 Aug 2012 | #2 |
| | I ran Startup Repair, it did a system restore by itself, it took about 15 mins, after reboot, it was able to boot up to the login screen. I didn't log into windows, I just restarted from that screen, and I thought it was solved as I repeated the process 3 times, without login into windows. Next, I rebooted and now I logged into windows. I saw it was installing a driver, but couldn't check which one. I restarted once again, and got back to the same BSOD. |
| My System Specs |
| 19 Aug 2012 | #3 |
| | Welcome to the forum, To properly analyze your BSOD's, our experts need you to follow these posting instructions, http://www.sevenforums.com/crashes-d...tructions.html After running the tool, post your results in a new post in this thread, don't edit a previous post. Also filling in your system specs will help, System Info - See Your System Specs |
| My System Specs |
| . |
| |
| 19 Aug 2012 | #4 |
| | I am not able to log into the computer, not even in safe mode, so i can't run the SF diagnostics. Any other way to upload the required info? |
| My System Specs |
| 19 Aug 2012 | #5 |
| | Juan, Do you have a Win 7 DVD? |
| My System Specs |
| 19 Aug 2012 | #6 |
| | No, this is an Acer Aspire, I have the disks it creates to restore the computer to factory... |
| My System Specs |
| 19 Aug 2012 | #7 |
| | Do you have a 32 bit version of Windows 7 installed or a 64 bit version of Win 7 installed? |
| My System Specs |
| 19 Aug 2012 | #8 |
| | It's 64 bit |
| My System Specs |
| 19 Aug 2012 | #9 |
| | Juan, Go to another Win 7 64bit system and: CREATE A SYSTEM REPAIR DISC START | type System Repair | Enter key | Create Disc button Boot from that disc. Navigate to a command prompt. using good old copy commands, copy any data dear to your heart to a USB drive or USB stick. Here's how to get to a command prompt using the disc. GO TO A COMMAND PROMPT USING A SYSTEM REPAIR DISC 1) Insert System Repair Disc into optical reader. 2) Shutdown computer. 3) Boot up computer from the System Repair Disc 4) A SYSTEM RECOVERY OPTIONS dialog appears. 5) NEXT button 6) select Use recovery tools that can help fix problems starting Windows 7) NEXT | Choose Command Prompt Run desired commands and type EXIT when finished. Remove the System Repair Disc. Shutdown computer. Power on computer. NOTE: If your computer doesn’t boot from the optical drive, then Immediately after pushing your Power ON button, start tapping the F2 key to get to the BIOS to change the boot order On some computers, Immediately after pushing the Power ON button, start tapping the F12 key and choose CD/DVD to change the boot order only for this time. |
| My System Specs |
| 19 Aug 2012 | #10 |
| | OK, I created the repair disk. Which commands should i type? |
| My System Specs |
 |
BSOD 0x7B Win 7 Home Prem, cannot log problems?
| Thread Tools | |
| Similar help and support threads for: BSOD 0x7B Win 7 Home Prem, cannot log | ||||
| Thread | Forum | |||
 No BSOD, Windows 7 Home Prem. Freezing After Login. | BSOD Help and Support | |||
| Frequent BSOD on custom build win7 home prem. x64 | BSOD Help and Support | |||
| Win 7 Home Prem X64 BSOD | BSOD Help and Support | |||
| BSOD 0x01E Windows 7 Home Prem 64bit | BSOD Help and Support | |||
| BSOD on Win 7 home prem 64 bit | BSOD Help and Support | |||
All times are GMT -5. The time now is 07:48 AM.
